Having problems with your Pentax K10D Digital Camera with 18-55mm Lens ?

I have a K10D 2yrs old little use lots of care and the modes dont change when turning the mode dial between user and manual and the f stop value never shows anywhere

Answers :

Pentax K10D shutter release won't function, mirror doesn't open, all else normal.
Repair Help & Product Troubleshooting for Pentax K10D Digital Camera with 18-55mm Lens

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a K10D 2yrs old little use lots of care and the modes dont change when turning the mode dial between user and manual and the f stop value never shows anywhere

Pentax K10D shutter release won't function, mirror doesn't open, all else normal. ... Pentax K10D Digital Camera with 18-55mm Lens

My flash seems to be stuck in the "suppressed" mode. Also the Manual on page 64 refers to a "turn" of the "command dial" to the "flash mode setting". Since that item is not described anywhere else and the only turnable dial is the "mode" dial, I assume that it means to press the flash mode arrow. When I do that nothing happens. The flash modes do not display as described in the manual. I can't figure out how to get the flash to function properly again. I have made all my attempts with fre

Remove memory card and batteries, press and hold power button for 5 seconds, wait a few more minutes, put just the batteries back in and try it. Also make sure zoom and lens are not dirty and no debris on them. If so, use rubbing alcohol and cotton ... Fuji FinePix S1000FD Digital Camera

I have an EOS Rebel XTi. The Mode dial does not show all zones, ie: It shows Program and Shutter-priority and automatic depth-of-field but does not show Aperture-priority or Manual modes on the setting display when selected on the dial.

Rebel does not have 1.0.4this can be a possible non canon firmware or a beta versionflashing your 1.1.1 may help out with this issue. ... Canon Digital Cameras

Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig

That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera

Suddenly I can't control the aperture with the sub command dial in the manual mode. I have tried a "hard reset" and the two button reset to factory defaults. In M,A and S modes the shutter and aperture values will disappear and only return after a two button reset.I can adjust the aperture in A mode with the command dial.The shutter speed is adjustable in M mode with the command dial.

In Manual mode only the front dial can be used to set the aperture. That is probably In Aperture mode you can only choose the the Aperture. Shutter speed is automatically chosen. That is why the shutter speed value will disappear.In Shutt ... Nikon D80 Body Only Digital Camera

My shooting mode dial is not working properly. when i switch the mode dial to auto it show as manual on my LCD. camera type is powershot A580. thanks

... Canon PowerShot S500 IXUS 500 Digital Camera

Users guide I have a cannon rebel x, 35mm, and I need a users guide. Where can I find one online to read or how can I buy one. One online to read would be ok. jjohnn i don't have a manual and i need to see pictures of dial types [modes]

Try here:\015\012\015\012http://www.usa.canon.com/consumer/control ... Canon Sure Shot 115u II Date 35mm Film Camera

My Nikon D700 Camera is sometimes not recognizing my having a cpu lens (24-70 f2.8 & 105 Macro f2.8 VR) attached and giving me a the error as listed on user manual page 410 with F No lens attached, or non-CPU lens attached without specifying maximum aperture. Aperture shown in stops from maximum aperture. Aperture value will be displayed if maximum aperture is specified. Pages 210 ? 2 4 (blinks) Camera unable to focus using autofocus. Focus manually. Page 81

... Nikon D700 Digital Camera

Hi, I have just bought the Panasonic FZ45 and seem to have a problem with the flash. It will not pop up automatically when in "IA" mode. The display actually shows the symbol indicating that the flash is forced off. Have tried to change this using the REC set up menu but to no avail (incidentally the option to force the flash off appears in the user manual, but not on the REC menu). I have searched some of the forums on the web and it has been suggested that the FZ45 does not have an auto fla

... Digital Cameras

On my d90, under M (manual mode or aperture priority), the aperture on the readout goes beyond the actual aperture range; i.e. f3.5 - 5.6; readings will show aperture range of 5 - 29 when I scroll with the sub command dial; sometimes when i remove the battery it returns to normal; how can i fix this problem permanently?

There is NOT a problem. The f3.5-5.6 indicates the maximum aperture in the zoom range. At 18mm the maximum aperture is f3.5, at 105mm it's f5.6. The minimum aperture ranges from f22 to f38.\012\012\012So, at 18mm, the aperture can range f ... Nikon D90 Digital Camera with 18-105mm lens

I have a Polaroid digital camera I got in May that came with a PoGo printer. It all works fine, but I've misplaced the manuals, and when I go to import photos to my Mac, I get nothing. I don't know what the correct "mode" is to import, I've never had this problem before with any camera and my Mac, usually it instantly shows as a source. Do the settings for the PoGo printer disable the Mac to connect as a source? If so, what "button" do I push to allow it to be recognized. It's a pink Polaroid, 1

Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Polaroid I533P Digital Camera

My Sony A700 works ok in the P,A,S and M modes. However when set in Auto mode the lcd shows Portrait. When in Portrait it shows Portrait. When in Landscape the lcd shows Portrait. When in Macro it shows Manual.When in Sports action it show Manual. In Sunset it shows Nightime. It also shows Nightime in both the Nightime and Memory Recall modes. The +/- button calls up the ISO screen instead of the ev screen. What's the solution?

Has it been serviced before? I remember one A200 with a very similar problem. There was a flex cable broken inside - the owner had given it to another technician before me and he managed to brake it. I think it could be a bad connection or some liqui ... Sony Alpha DSLR-A700

The Mode dial on my MAXXUM 7D does not operate. I cannot switch it from manual mode to any other mode (i.e. Program Mode).

... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera

The dial on top that switches from portrait mode to action and other modes turns, but it seems to be "stuck" in portrait mode. The portrait icon shows on the lcd screen, and doesn't change when I turn the dial to other modes. And my pictures look terrible.

... Olympus Camedia C-5060 Wide Zoom Digital Camera

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do

The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.

I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera

Nikon D80 with a Sigma Lens (80 to 200 I think). In manual mode, often shutter won't release - this was a close up of a hummingbird with a fast shutter speed. Internal light meter showed underexposed, but the background was dark green. Initially, the shutter released, but later would not operate either with a remote, or by manually depressed the shutter release button. Switching back to auto, the camera seemed to work fine, but in this mode could not get the desired shutter speed. In full manual

In full manual, yes it should. ... Digital Cameras

Hi! I have a problem with my samsung digimax s500. My camera makes worse photos in the MANUAL Mode. They are all dark. It seems that the Exposure compensation is set at -2. The camera shows me that when i press the Shutter button lightly. But i can not reset this in the MANUAL Mode. Wich means that i get only a normal bright photo when my exposure time is set at 8 seconds. Please help me! sincerly Georg Heidfogel

... Samsung Digimax S500 Digital Camera

The wife bought this camera,the ViviCam 8025.WE downloaded the disk onto my computer,like it says,but their is no User,s Manual on the disk.Any way I can not find any thing.Can a person get a regular paper type user,s manual to show you how to operate all the different things? [email protected] Thanks

Go to the Vivitar web site and download a copy to your computer. You can then print out any pages you need. ... Digital Cameras

Hi folks no problem - here's a solution to Vivitar Vivicam 7025 digital camera missing manual problem. We've just bought a from Argos, and as others have said on various forums there's no manual to be found anywhere. However, the 7025 model appears to be based on the 5024 and there is a manual available for that one. It's at http://www.vivitar.com/products/1/digital-cameras/21/vivicam-5024, click on the Adobe pdf VC5024 User Manual (1.01 MB PDF) icon to download it.

Vivitar ViviCam takes video clips but there is no sound - what is the problem. Please help ... Digital Cameras

My Kodak Z712 is changing modes by itself from one mode to another randomly, without turning mode dial button, and can not take picture until camera stop's changing mode by itself.

I would try spinning the selector knob back and forth a few times to see if it cleans up the contacts otherwise i think you will be sending it in for service. I love my 712is. But check on repair costs,, might get the 812 or 1015 cheaper and they use ... Kodak EasyShare Z712 Digital Camera

When I put my gopro camera to F default mode in order to have video mode come on when I turn the camera on, for an instant it will be in video mode but then automatically switches to 10 second timer mode? Also I was shooting some ice climbing and the camera stopped filming in every occasion on its own after about a minute or so even thoug I have set it on "OFF" for manual turn off- could it be because temperatures were -12celcius even though I have a lithium battery? Finally I have files from 1-

What card are you using? They are particular to which cards they will work with. ... GoPro Motorsports Hero GMHW50 Digital Camera

Stuck in "stop" mode, Viewed tape just for a few seconds. I don't have a manual.

It wasn't a digital camera problem. It's a camcorder . I still have the problem. ... Digital Cameras

When control dial is set to Tv the lcd says it is in P mode, When set to Av it says M. When set to portrait, it says full auto, the control dial will only show P, M, A-DEP,full auto and sports. I have updated the firmware, but still the dial does not give all the functions. Any ideas??

Sorry we are not able to help you with your problem. ... Canon EOS Rebel XSi Digital Camera

Kodak EasyShare DX6490 showed error # E45 on the screen when I tried to turn it on. After a while of trying to fix it, it doesn't even show that anymore. Now when I turn the dial the icon I turn it to blinks around 15 times shows the message "error # E45" for less than a second, then makes a noise and everything stops.

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Kodak EasyShare DX6490 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2546 seconds