Having problems with your Pentax K20D Digital Camera ?

My Pentax *ist DL camera has started to give me problems. The rotary control dial on the top left of the body does not work. When I turn it, it does not display the setting as set on the dial. In addition the flash has stopped working. It takes good daytime photos.


Answers :

Hi,

it is best to be sent for repairs, since it appears that something is wrong inside of your camera. Software doesnt respond to the switches, it is best to be not turned on and sent to repairs.
Repair Help & Product Troubleshooting for Pentax K20D Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Pentax *ist DL camera has started to give me problems. The rotary control dial on the top left of the body does not work. When I turn it, it does not display the setting as set on the dial. In addition the flash has stopped working. It takes good daytime photos.


Hi,it is best to be sent for repairs, since it appears that something is wrong inside of your camera. Software doesnt respond to the switches, it is best to be not turned on and sent to repairs. ... Pentax K20D Digital Camera

My flash seems to be stuck in the "suppressed" mode. Also the Manual on page 64 refers to a "turn" of the "command dial" to the "flash mode setting". Since that item is not described anywhere else and the only turnable dial is the "mode" dial, I assume that it means to press the flash mode arrow. When I do that nothing happens. The flash modes do not display as described in the manual. I can't figure out how to get the flash to function properly again. I have made all my attempts with fre


Remove memory card and batteries, press and hold power button for 5 seconds, wait a few more minutes, put just the batteries back in and try it. Also make sure zoom and lens are not dirty and no debris on them. If so, use rubbing alcohol and cotton ... Fuji FinePix S1000FD Digital Camera

My flash has stopped working for some reason - I tried to use it yesterday and all of a sudden the camera takes pictures without the flah. I went on the flash settings and made sure it was set on Auto and then tried to take the picture again but no flash still. I then set the flash to go off on every picture but still the flash did not go off I would like to know how to get the flash working again Thanks


Either your batteries are weak or your flash is dead. ... Olympus FE-210 Digital Camera

Flash has stopped working on my Nikon D40. I've tried a factory reset, tried to get to the flash setting but that menu option is no longer available (highlighted) in any mode. I'm thinking it's broken and not a setting thing. Everything else works fine and it still takes pictures just without the flash. The flash pops up when needed but no flash obviously.


There's a common problem in the flash arm. I found this link that shows a simple repair. If you use this and make the repair yourself, understand that you will void your warranty if you have one. Also, do not touch the bulb as you'll get oil on it ... Nikon D40 Digital Camera with G-II 18-55mm Lens

I have a fujifilm z20 that won't take pictures with the flash on. Flash must be surpressed for pictures to be taken, it also won't zoom in or out while on any setting besides surpressed flash and it displays a orange light when set to auto flash or forced flash.


Check with Fuji and see if there is a firmware update for the camera. ... Digital Cameras

White Screen Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white picture which can be deleted. The camera does not flash although flash is set to automatic and photo taken in a dark room. Camera flashes (weakly) with flash set to manual on. Lens is unobstructed and appears to be perfectly normal. Camera was not dropped. Batteries have been changed.


\015\012Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white pictur ... Pentax Optio E10 Digital Camera

My fujifilm z33's flash stopped working? I have it set manually to flash, but no flash


... Agfa FUJIFILM FINEPIX Z33WP Digital Camera

Trying to change flash settings but says 'flash settings cannot be changed' with a warning triangle. I am in the 'Green Camera' setting on the dial on top


Hello. I have a solution for you. You have your camera set to "burst" mode, which does not use flash. Reset it to "single" mode and you will be able to change the flash settings. Regards, Joe. PS Please rate my answer. Thanks. ... Sony Cybershot DSC-H3 Digital Camera

My Canon EOS Rebel XS digital camera has suddenly stopped taking pictures. It will not focus even though it is on the auto focus setting. The first set of numbers are flashing and there is a flashing dot behind the ISO 800. It was working fine when I used it one time and then the next time it wouldn't. I can view pictures, but cannot take them on any setting except A-DEP and it's not focused even then. Please Help!


Try cleaning the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

The flash suddenly stopped working...I noticed over the weekend when I was using my camera at night or indoors the flash wasn't automatically going off. I checked the settings and the flash was turned on, I even tried re-setting the camera and it still doesn't work?


... Sony Cyber-shot DSC-W80 Digital Camera

My D80 suddenly stopped taking photos while I was in Auto mode. I noticed the flash stopped releasing. I've changed lenses, reset the camera's green buttons, switched out the card, reset the clock. It will occasionally take a photo, not necessarily in focus,and the flash will on occasion pop, but I can't figure out what the correct triggers are. Can anyone help? Lens is 18-135mm. Set Lens in in "A" and camera is in "AF"mode. Thanks much.


Hi, Also, try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector is the reset switch. If that does not work call Nikon digital 1-800-645-6689. ... Nikon D80 Digital Camera with 18-135mm Lens

On my D50 the COMMAND DIAL has stopped working so shutter and apertrure cannot be set - but - normal photographs cxan be taken using 'AUTO' or MODE settings on the MODE DIAL. Only P,A,S,M modes cannot be used. Otherwise all functions of the camera work well and photo results are good. The camera has NOT been dropped or jarred.


I have the same issues. Let me know if you got an answer.\015\012Thanks, [email protected] ... Nikon D50 Digital Camera

Command dial on a friend's Fuji Finepix S9000 is NOT functioning. Can't control aperture, shutter speed, flash settings, etc. Can it be opened and fixed (he has no warranty, thus no problem with opening it). Is there a special setting or way of turning or pressing buttons that he is doing wrong? It says to press (and hold?) a button then twist the dial, but no change is made as far as I can see. I have tried enless things and have much experience (though I'd be a fool not to ask others). A


Hi. I just bought this exact model on ebay and it arrived with the same problem. I found many others with the same problem on various sites, but happened upon this extremely thoughtful man's album showing the steps to fix it. Thought I'd share with y ... Fuji FinePix S9000 Zoom Digital Camera

E:91:01 My camera flashes E:91:01 and the flash has recently stopped working. The flash icon flashes continuously with the E:91:01 but you cannot change the flash settings at all, the up button is inactive. I've turned it on and off, the battery is fine.. Where can I go to get it fixed? Thank you! I have the same problem the flash not work will


I started poking all the settings in my Sony DSC-100,and the E:91:01error was on and the flash symbol started to flash.I called Sony no help.I went to the menu then setup.I went to camera one notch ... Sony Cyber-shot DSC-W35 Digital Camera

Hi, My D80 has suddenly developed a fault, where it registers the flash as open and in use even when its shut. This has the effect of syncing the shutter speed and limiting it to 1 200th in all modes. In addition, whilst the flash button will still change the flash mode using the command dials, it won't open the flash- almost like the camera thinks the flash is already open. I have tried prising open the flash, and it still doesn't fire even when open. There was no indication of a problem previ


Hi dave_lankest. My suggestion is to do a factory reset on the camera. This is found on page 129 of the manual. Open the rubber flap on the left side of the camera then you will see below the USB port a small button, that is the reset switch. If that ... Nikon D80 Digital Camera with 18-135mm Lens

E:91:01 My camera flashes E:91:01 and the flash has recently stopped working. The flash icon flashes continuously with the E:91:01 but you cannot change the flash settings at all, the up button is inactive. I've turned it on and off, the battery is fine.. Where can I go to get it fixed? Thank you!


Easily just reset the camera with a pencil. ... Sony Cyber-shot DSC-T10 Digital Camera

Hi. I have a problem with my Panasonic DMC LZ1. Has developed a fault. When powered on with charged batteries and memory card inserted, the camera doesnt do anything on any setting except the review (arrow indicator) setting. The review setting only works if you 'power on' on this setting. (You can see photos on the memory card). If you power on -on a different setting and move the dial to review, then review doesnt work either. Neither the display (except for review as above) or lens wor


... Panasonic Lumix DMC-LZ1 Digital Camera

Canon A560 camera problem - the images are overexposed. I checked the exposure setting, AWB, and all other settings and they are all normal. There is an exposure setting where I can set to + or - 2, but setting it to -2 does not help much. Outdoor photos are almost completely white. There is some detail in black objects. Indoor photos are overexposed. Flash pictures seem OK. The picture on the display is OK. I compared some macro photos taken a few weeks ago with macro photos now. The good photo


... Canon PowerShot A560 Digital Camera

My flash quit working on my canon EOS 500D on every mode, when I go to flash control in the menu and click on built-in flash func. settings it says ... this menu canot be displayed. external flash is attached, but there isn't an external flash attached?


This camera is only one model period old, is it still under warranty? If so take it in for service. I'm including a diagram of the manual release button on the side of the camera for the flash. Try pressing this button to see if it pops up. If not th ... Canon EOS 500D / Digital Rebel T1i Digital Camera

F-stop issues when i set the camera to the M setting on the dial, the only thing its letting me adjust is my shutter speed and ISO. I can't find a way to also adjust the aperture setting. I can do everything else, but not that. And if I switch to Av, I can't set my shutter speed.... help!


See pages 36&37 of the manual.If you haven't got one, you can download it here.In M mode...Turn the sel ... Canon EOS Rebel T2 with 28-90 lens 35mm Film Camera

My Canon SD950 IS camera will take about 30 seconds to take a flash picture. You have to hold down the shutter button for a long time. The flash indicator flashes on the display for quite a while and then the picture is finally taken. This seems to have happened after the battery was run down to nothing. After that, this flash problem appeared. I have got another battery but this still happens. I have reset to default settings as well . Still has problem. What is wrong?


... Canon PowerShot SD950 IS Digital Camera

I am having problems with the flash working on my camera. It does not seem to matter if it is in automatic or manual modes. When I take a picture in either mode, when a flash is needed, the flash icon just blinks on the display. The camera will not take any photo when this is happening. The only way I can get my camera to take a photo is manually set the flash to off. Why is this happening?


Please reset camera through Reset option in Menu. This will set camera on default settings and any glitch in settings will be removed.Thanks. ... Canon PowerShot SD870 IS Digital Camera

HI! the flash of my canon sx130 stops working. I tried pressing the flash button but it would not change to the "flash on" mode, the icon always says that the flash is off. I tried different camera setting but still not working. Thanks!


... Canon PowerShot SX130 IS Digital Camera

Flash Pictures I have a Canon XTi and am using a 580EX flash with it. The problem is, I have to set the flash at plus 1 1/2 to 2 stops to get a decent exposure. Is there something that I am doing wrong?


All canons tend to underexpose to avoid blowing the highlights. I still think this is a poor design / calibration of the light meter. A search of the net will reveal some folks who sent their xti's in to canon to be fixed and got them back better. Ca ... Canon Rebel XT / EOS 350D Digital Camera

Hi, I have just bought the Panasonic FZ45 and seem to have a problem with the flash. It will not pop up automatically when in "IA" mode. The display actually shows the symbol indicating that the flash is forced off. Have tried to change this using the REC set up menu but to no avail (incidentally the option to force the flash off appears in the user manual, but not on the REC menu). I have searched some of the forums on the web and it has been suggested that the FZ45 does not have an auto fla


... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1551 seconds