Having problems with your Pentax Optio 60 Digital Camera ?

When i turn on camera lens does not come all the way out , result

\015 Pentax optio50L dIgital camera\015

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Pentax Optio 60 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche

Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

When i turn on camera lens does not come all the way out , result

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Pentax Optio 60 Digital Camera

Ok so i am turning on my camera (an Fe-340) and the lens go in two or three times then when the screen finally does come on it is blurry and way out of focus, also when i attempt to adjust the zoom the camera turns itself off, if i attempt to turn the camera off using the power button it goes off but the lens does not retract.All other functions on the camera are operating correctly to my knowledge i can even take a blurry out of focus picture, view it in display mode or even transfer it to my c

It may be something more serious, but the problem you describe is\015\012frequently due to corrosion on the battery contacts inside the camera. \015\012Remove the batteries and wipe the camera contacts firmly with a clean\015\012cloth (heavy corrosio ... Olympus FE-340 Digital Camera

Lens Error Once I turn on my camera, I get the regular screen mode and before I can take a picture it says lens error and turns off the camera. The lens comes out all the way once turned on and retracts once it shuts down.

Try the procedures in this tip. ... Pentax Optio 60 Digital Camera

Lens Error When I turn on the camera in any mode except play back, the lens will come out as if it's coming on but then the lens' go back in and the camera shuts down. The batteries are fully charged and the camera has not been damaged in any way.

I am sorry to say but you have a physical issue with the camera. Your either going to have to take the camera apart yourself or bring it in for service. Try working with their support \015\012\011\011\011\011\011\015\012\011\011\0 ... General Electric A835 Digital Camera

This Sucks! My camera is new, I went to use it...actually for something I saw that was hillariious...and I turned it on, the lens came out...it was zoomed all the way, and I could'nt take the pic nor could I adjust the zoom. Then I got this hateful message to turn camera off then on again, which I did. Now the lens does not return apon turning the power off, but does retract and come back out when I turn it on...and then the same scenario! Help Please!!!!!!!

I think this is just a hardware malfunction(some mech. switch) because, i have a lz7 and when i deliberately open the battery case with the camera power on it obviously switches off and then when u close the battery case either with the power on or o ... Panasonic Lumix DMC-LZ7 Digital Camera

Sony cyber shot with Carl Zeiss lens, 8.1 megapixels, model # DSC-H7 ...... when camera is turned on, the lens has stopped coming out rendereing the camera inoperable?? You can hear the lens trying to move, and then instruction on screen to "turn power off and on again".. still no results???!!!

This is a common issue if the lens cap is on, I will assume it is not so something is binding the lens. It is probably sand or a misaligned lens. Try grabbing the lens barrel as it extends, you will need to remove the outer barrel to do this. If does ... Digital Cameras

My Ricoh Caplio R4 will turn on but the lens stops half way. All data comes up on screen, but you can't clear any of it. Then after about 10-30secs, the camera turns itself off and the lens is stuck half way out. Battery is fully charged, was working properly, then just stopped. What could be the problem?

Hello Mar LizThis is a fairly common error with most digital camera's .This either means that something is jamming the lens , or that the\015\012lens sensor is faulty. Given that the lens is stuck halfway , we can rule out a sensor proble ... Digital Cameras

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work.

*&%$@#%^&*&^% !!"It's working!!!!\015\012\015\012Turn your camera on and put it near your ear. Did you hear a softly motorized sound in the lenses area and the green LED is flashing? If you hear this sound do this.\015\012\015\012Do it under your own ... Panasonic Lumix DMC-LC33 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on

Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera

I dropped my camera while the lens was open and it didnt seem to have broken. When I turned it off and on again the lens went in fine but wouldnt come back out. Its jammed inside the camera! Sometimes it comes out partly but never all the way.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras

The lens won't come all the way out- it makes clicking noises like it wants to and kind of bounces it but doesn't come out the rest of the way. If I push the zoom button over and gently twist, it will come out all the way. Once I turn the camera off and back on it gets stuck again. (I don't know for sure the model #- I don't have it with me right now but I got it about 3 years ago.)

Try the steps in this tip. ... Sony Cyber-shot DSC-W50 Digital Camera

I turn on my nikon s220 camera the lens comes out and says "lens error". now the lens is out and theres no way to make the camera work. The lens is just frozen and no matter what i do its not working

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Nikon Coolpix 2200 Digital Camera

When I turn on my Panasonic DMC-FX55 the lens comes out fine and the screen displays for 2 seconds then goes blank except for the message 'Turn off then on again' - which doesn't work. The only way to get the lens to retract is to select 'Playback' - tun off then on . The playback mode works fine and after 10 econds the lens returns to closed position. Is their a combination of buttons that reset the camera??

... Panasonic Lumix DMC-FX55K Digital Camera

I have a canon power shot A530. I dropped it on the floor with the lens open.....now the lens is half way out and it wont go out all the way or close all the way. when i turn on the power it comes on then cuts off with out displaying a picture in the veiwer on the back of the camera. I am sure i need to send it in for repair, if not tell me how to fix it, if not tell me where i can take to repair it



Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... HP Photosmart M525 Digital Camera

Camera was dropped in use and the lens has half closed and jammed! The camera will not turn on even to view the pictures on the memory card. Is there a way to reset or manually close the lens? Also do you need special tools to disassemble? as I cant see how it comes apart.

Hi try to reset ur camera...To do such reset, turn on the camera and hold the menu button down for longer than 5 seconds. A message should hopefully come up on your LCD asking if you want to reset the camera. Select Yes...thank u!!!rate m ... Casio EX-Z1050 Digital Camera

My Kodak C813 EasyShare camera's lens does not extend out of the camera when I turn it on. Then error message comes up and it says Lens Error 115,0,0,350 so I am looking for ways to fix it withou

Try these procedures. ... Kodak Easyshare C813 Digital Camera

I dropped my camera on the beach right as a shallow wave was coming in. In my fumbling to recover the camera I turned it on. The lens extended and remained that way. I took the plastic camera cover off, rinsed all parts (with purified water) that I could. I air and low heat blew dry the camera over several day, and re-assembled it. When I insert batteries I get a power light, but get no lcd screen, no sound of pictures taken on full compression of picture button, no further extension or ret

Sorry, I'm afraid that I also think it's a lost cause. Usually repairing a water-damaged camera is more expensive than buying a new one. ... Canon PowerShot A1100 IS Digital Camera

Casio EX-S500 Lens error. when i turn the camera on i get a grinding sound and the lens only comes out part of the way. from what i understand the gears in the lens must be stripped. does anyone have a diagram or steps of how to remove the lens set up so that i can replace it?

Remove the Back and front covers, then use a small flathead screwdriver to release the 2 hinges that hole the lens assy down; then unlatch the 2 ribbons cables. Now you can install the new lens assy. If you're not going to use the "old lens assy, can ... Casio Exilim EX-S500 Digital Camera

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera

\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

Lens error hi my camera stopped working the other day...it turns on but the lens wont come out and it says there is a lens error then shuts of....is there an easy way to fix this?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Kodak Easyshare M753 Digital Camera

When i power up my casio the lens makes a clicking noise and doesnt extend all the way out if i zoom out the lens does come out but the focus is poor and i get a lens error message and the camera turns itself off.

Try these procedures. ... Casio EXILIM Card EX-S770 Digital Camera

My Camera (Nikon Coolpix S3000) broke because I dropped it while the lens was extended out... and the lens hit the ground. Now when I try to straighten out the lens, I turn the camera on and off, and when it turns off, the lens doesn't go in all the way, and when I turn it on, the lens goes extends out, but immediatley goes back in again!! (but not all the way) I am lost, and extremley disappointed. Please help.

HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will ne ... Nikon Coolpix S3000 Digital Camera

I can only turn on my Cybershot DSC-N2 while the camera is in playback mode. I can look at the pictures and videos and change settings with no problem.. but when I try to switch to camera or video record mode the camera turns off by itself. Sometimes the lens will come out and then the camera powers down with the lens stuck out. Other times it just shuts off before the lens even has a chance to come out. The camera has never been dropped or damaged.

First press power button for 15 seconds .Then remove memory card from it may be your memory card has some issue.also press reeset button on camera some camera has reset button.start your camera without memory card. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4012 seconds