Having problems with your Pentax Optio 60 Digital Camera ?

LENS NOT OPENING FULLY FOR IMAGE TO BE SEEN ON LCD SCREEN


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Pentax Optio 60 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

LENS NOT OPENING FULLY FOR IMAGE TO BE SEEN ON LCD SCREEN


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Pentax Optio 60 Digital Camera

Black screen Hi, I have Nikon coolpix S1 camera. Till last month, I was able to take pictures, but today, when I tried to take one, it showed black screen. The lens opens properly. I am able to see the images which were captured earlier, but, now, I am unable to capture any image because, everything is seen black. I reset all the settings, charged the battery fully, but no change.


Click here to read the web page for solution. It's free to fix. You need to scroll down the page, as it has many re ... Nikon Coolpix S1 Digital Camera

T1235 camera - battery is fully charged, but lens will not extend and camera can not be shut off once it is turned on. I have to take the battery out for it to shut off. The LCD screen shows blurry image of what is seen through **** in lens cover. No error messages are shown.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Polaroid t1235 Digital Camera

The screen on my M380 does not show the image. The camera is fully charged and when I press the "on" button, the lens extends and opens. The screen is illuminated, but there is no image of what the picture will be. I can go ahead and take a picture -- it makes the appropriate sounds as it normally would and the flash goes off if needed. In fact, when I then plug into the computer, I can see that a picture was taken. However you cannot focus the shot because you cannot see the image on the s


This can be a settings problem on your camera, so what we can try doing here first is to reset or restore the camera's settings to its default and then after doing that power off the camera and take the battery out for 5 minutes then put it back in a ... Digital Cameras

My i85 camera's lcd no longer displays what you are looking at. Just a black screen. All the menu items are there and working. The battery is charged. The power button is working as well as the lens open, but no image is available just a black screen. When I I try to take pic is showed very low light but doen't show image of pic taken when I check. Please advise. This is almost a brand new camera used only a few weeks.


The iris is probably shut closed or the CCD is bad. The iris controls the amount of light that enters the CCD (charged coupled device). Sometime the iris get moisture inside and cannot open. Or the CCD is defective. Leave it in a dry environment for ... Samsung i85 Digital Camera

My i85 camera's lcd no longer displays what you are looking at. Just a black screen. All the menu items are there and working. The battery is charged. The power button is working as well as the lens open, but no image is available just a black screen. When I I try to take pic is showed very low light but doen't show image of pic taken when I check. Please advise. This a brand new camera and was taken excellent pic as of this friday.Thanks


My i85 camera's lcd no longer displays what you are looking at. Just a black screen. All the menu items are there and working. The battery is charged. The power button is working as well as the lens open, but no image is available just a black screen ... Samsung i85 Digital Camera

My FE-360 keeps shutting down with the lens stuck out. When you try and turn it on you can hear the lens trying to retract but it stays stuck out and the camera makes a bleeping sound. I have noticed that if i open and close the battery cover whilst it is making this bleeping noise, the screen comes to life. All of the menus can be accessed and options changed but the picture seen on screen is very poor quality and the camera will not take a picture. As soon as you press the capture image butt


Your camera has a lens error, this\015\012 is such a common fault that I hop ... Olympus FE-360 Digital Camera

Canon Powershot A610 digital camera--LCD screen shows icons, but otherwise is blank--there is no visible movement in the lens when I take a picture without flash--have tried setting it on TV setting and taking a picture, then opening the battery cover for a few seconds after waiting 7 seconds or so, but no images on the LCD except the camera's icons--ideas? probably a stuck shutter, or is it still possibly the CCD sensor even though there's no visible movement in the lens? Ideas? Thanks!


Much more likely that it's a stuck shutter, especially for your model camera. How many tries did you give the fix? Some people stated that it took at least 15 repeated tries before the shutter opened:\015\012\015\012\015\012 ... Canon PowerShot A610 Digital Camera

When I turn on my Samsung NV3 camera, the shutter opens, a blurry image appears on the LCD screen and then it turns its self off. Although the camera appears to be off, if you press the button to view previous images, the blue power light on top comes back on, and the images can be viewed The battery is fully charged


Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowin ... Samsung NV3 Digital Camera

I have a Panasonic PVGS19 Mini DV Camcorder. The problem is the flip screen. Will not work when fully open. There is a picture when it is opened at about 1/4 of the way. Also, when opened and flipped over ( self portrait mode) and closed the image is upside down. Thinking it is a mechanical connection between the camera and the LCD that either need some cleaning or repair. Can I do this myself? Not cost affective to have repaired by service, I am sure. Thanks Bob http://www.fixya.com/lpregis


There is a small flat ribbon cable between the camera and the LCD display that probably has a small crack in it. Move the cable the right way and it works. The cable neds to be replaced. This is NOT a repair to be done by anyone without prior repa ... Panasonic Digital Cameras

My Canon PowerShot SD1000 shoots completely black pictures. The lens is open and there is no damage to the lens or the screen. The battery is fully charged and I've even tried a different memory card. It reads pictures previously taken, but takes only completely black images.


A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very b ... Canon PowerShot SD1000 Digital Camera

Panasonic Lumix DMC-LZ2 Image 'melts' into streaky vertical lines when camera is turned on. This problem started occuring immediately after I found my kids deliberately turning the camera off while jamming the lens cover open, so they could get the 'turn camera off and then on again' error message (yes, I know - they've been banned from touching it again). I confiscated the camera, turned it off and it sat unused for about 3 days. When it was next turned on, the image on the LCD screen was


... Panasonic Lumix DMC-LZ2 Digital Camera

Lens wont open no image in lcd screen


Time to call for repair. You don't state the manufacturer, but I am sure it can be repaired. ... Digital Cameras

The camera is a sony cybershot 5.1 megapixels. when reviewing previous pictures there is no problem but when in camera mode wth the lens cover open the image is opaque and lines appear across the screen. the battery is fully charged and there is plenty of spare capacity on the flash card


There is a problum with ccd imager ic so please go to your nearst sony service centre & fix this problum ... Sony Digital Cameras

My daughter's Sanyo VPC S1070 digital camera shows a Lens error code: 0x15110000. I've tried to look at/download pictures and it won't do that either. It has 10.o megapixels and was purchased at Christmas. The lenscover doesn't open either and no images show on the LCD screen. I won't say powered on for more than a second, just long enough to flash the message.


We have the same problem with our sanyo...does anyone know the manufacturers number...walmart would not take it back cause we threw away the box..so we are stuck with a camera that does not work and spent alot of money on it. any suggestions??? ... Digital Cameras

When I push the power-on button the LCD display briefly flashes on with the "Pentax Optio" screen and then switches off. The lens is stuck half-way open, and the camera will not stay powered up. The battery is fully charged (as well as the backup battery) so that isn't the problem. Is there a "camera reset" procedure for this camera? Other ideas?


Good day,This is a common problem and sometimes can be fixed.Please see details on my tip on how to fix this error here:http://www.fix ... Pentax Optio A10 Digital Camera

Camera repair my camera feel from apromimately a feet height and the shutter remains open and i cannot see any images on the lcd... just blue screen. and it shuts down after 5 secs but doest not retract the lens. please tell me wat to do abt it.. or where can i get it repaired? i am currently in delhi, india


The following blog outlines some repair options for a lens error:\015\012\015\012http://camerarepair.blogspot.com/ ... Olympus FE-170 Digital Camera

Lens stuck My camera won't register to open the lens. I don't know how it was before, but the screen is completely black and it won't take pictures. If I open the lens manually, the screen shows the image, but obviously I cannot take a picture with my thumb across half the lens. Is this fixable, or should I get a new camera?


Yes it is fixable. if there is a friction in the movement of the lense cover blades this happens. If it is due to fine sand or dust try using a soft brush with a rubber pump fitted at the back so that it cen blow the sand off the camera. The problem ... Fuji FinePix F470 Digital Camera

Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford


If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera

My Pentax Optio S10 digital camera is giving me problems. Initially the lens would not extend fully and would then immediately retract and the camera would then turn itself off. After cleaning the extended lens barrel each time it extended, I found it would open further each time. It nows extends fully, but still retracts immediately thereafter. At the time the screen shows the green Optio screen for a split second and then shows an out of focus shot of whatever the camera is pointing at, bef


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Pentax Optio S10 Digital Camera

My camera comes on and the LCD display is fine but the camera does not pick up images. The LCD screen is black where an image should appear like something is in front of the lens but nothing is obstructing the lens?


... Sony Cyber-Shot DSC-T1 Digital Camera

I just purchased a i936 yesterday. Put batteries in, turned on. The lens extended, lens door opened,the screen says Polaroid with color bars. Then, lens retracts, screen says Goodbuy w/ bars. I tried new batteries, I got into the menu and did reset. No image on screen, except commands.The above situation lasts about 3-4 seconds.


The lens will automatically retract in and will say Goodbye, only if the batteries were empty or drained. However, in your case, you have purchased a new battery and in face the camera is new. The reset is supposed to be bringing back the camera in ... Polaroid Digital Cameras

The lcd screen on my camera cracked, and it had a dark spot on it. I bought a new screen to replace it. I replaced it, but the only thing that happens its the the camera lens opens and everything stops. The lcd screen doesn't come on, and the camera wont power off. is there something that i am doing wrong, or that I need to do to get this to work? thanks, Lavoia


Maybe you installed the LCD screen wrongly and it doesn't respond if not properly installed. ... Digital Cameras

Lcd screen the screen illuminates,but it doesn't display anything. I have a canon powershot SD110 digital elph.  When I turn the camera on the lcd lens illuminates but does not display images.  I cannot take new pictures but can view previous one.  Menu options occurs on the screen and can be changed.  I have misplaced my information booklet and do not know what to do to troubleshoot this problem and if it can be fixed.


Cannot get images deleted  ... HP PhotoSmart M437 Digital Camera

When i power the camera the lens appears to open however the lcd screen is black then when I take a picture and review it it is black as well. I think the lens is not opening even though I can hear it open


... Canon PowerShot A570 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2997 seconds