Having problems with your Pentax Optio M20 Digital Camera ?

I dropped my Pentax Optio M20 digital camera and it got hit on the lens portion so that the part that moves in and out when zooming, is stuck and misaligned. Is there a way that I can fix this myself?


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Pentax Optio M20 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I dropped my Pentax Optio M20 digital camera and it got hit on the lens portion so that the part that moves in and out when zooming, is stuck and misaligned. Is there a way that I can fix this myself?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Pentax Optio M20 Digital Camera

Digi camare the zoom on my Fuji FinePix F410 is stuck half way in and out help? when i try to move with the zoom button it has a mesage "zoom error" HELP!!!!!!!


The lens on your camera has become stuck due to being dropped, contamination such as sand, or a malfunction within the lens. If gently manipulating the lens itself does not free it then you will need to get it professionally repaired or replace the c ... Fuji FinePix F401 Digital Camera

Stuck Lens I fell on my camera just recently and the lens is stuck open half way. When you power it on it moves a bit to the side and up, then to the other side and up and then beeps couple of times. You can view all the pictures and see the opening screen when you turn it on on picture-taking mode but it won't open up completely. Is it possible to fix? If so how?


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot SD400 / IXUS 50 Digital Camera

I drop the camera. The digital zoom won't come in again. It's stuck. It kind of looks like the Pisa tower where one layer is in an angle. How to I manage to fix it? The power went off, but the digital zoom is still out, in an angle. It won't open again. The power went on but since it can't move, the power just shut down again.


Hello,This problem needs technical repair since the cause fell. Kindly bring your camera to the nearest Kodak Help Center near you.Regards. ... Kodak EasyShare V603 Digital Camera

Stuck Lens My 4 year old got a hold of my Konica Minolta Dimage G6000 and now my lens is stuck half way out. It will not move in or out. When it powers on I get "system error S0042." As I do not have a lot of money I am tempted to take it apart and see if I can fix it, but I don't want to make any problem worse. Any suggestions? Thanks, Todd.


If you have recently dropped the camera you may have damaged the lens\015\012tube (housing). This damage will prevent the lens from moving properly\015\012and will cause the camera to shut itself off after a few seconds. If\015\012the lens is damag ... Panasonic Lumix DMC-LZ2 Digital Camera

I have JVC Everio GZ-MG155 and until recently I was pretty happy with this camera. Few days back, I accidentally dropped it and now camera lense are stuck at one place (in zoom). Lense are not able to focus as well. I bought it from costco around 2 and half year ago and it is now beyond warranty time. I do not want to scrap it as I like it and it has good analog input functionality (which I use to convert VHS(analog) videos to digital videos). Is there any way I can fix it on my own or get


Hi,This has to be taken care by a Technician as this is a tricky Fix.If you could tell me your Location, i could try to Find, if some reputed shop that might charge you less amount.Let me know, so that we could proceed. ... Digital Cameras

MY CAMERA LENS IS STUCK AND WILL NOT ALLOW IT TO ZOOM IN OR OUT AND TAKE PICTURES. IS THERE ANY WAY OF TAKING IT APART AND BEING ABLE TO FIX IT. IT ALSO LOOKS LIKE THE LENS MAY HAVE GONE IN CROOKEDIT ALLOWS IT TO TURN ON JUST TO LET ME LOOK AT RECENT PICTURES, BUT WONT STAY ON TO LET ME TAKE ANY PICTURES IT TURNS OFF.


Hi,You can open the camera, but it was not advisable for you to take it off cause of the tiny parts inside that can result of much more damaged on the unit. It is better to take the unit to the service center for thorough check and repair ... Sony Cyber-shot DSC-S700 Digital Camera

I have a Panasonic LUMIX DMC-ZS19 Digital Camera and the lens seems to be stuck. When I turn it on I get a message that says, "System Error (Zoom)." Any way to fix on my own?


Try these procedures: http://www.fixya.com/support/r13011856-lens_error ... Panasonic Lumix DMC-ZS19 Black

The zoom lens is stuck, it will not open all the way, probably dirty, where can i take it to get fixed


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Polaroid i634 Digital Camera

When the camera is turned on a FOCUS ERROR shows up on the screen and will not disappear. Also the zoom lens is stuck half way out. Is there an easy fix. Regards LORRENZO.


I don't think there is an 'easy' fix for this except to send it in for professional service as the gears are not meshing right inside the camera causing this focus error. ... Digital Cameras

My fujifilm E550 digital camera has a problem where the cilyndrical piece in front that usually moves in/out is stuck half way (won't go back inside) and the camera will not take pictures. The camera is giving me a "zoom error" message. This problem started when the batteries where running out of charge. The problem is not resolving even when I put in fully charged batteries.


You may need to use some light "force" to manipulate the lens barrel into its proper orientation. Try a combination of turning it on and helping the barrel to rotate one way or the other. Also try a little manipulation when the camera is shut off, to ... Digital Cameras

My Nikon L18's lens is extended half way and stuck. The display says "Lens Error" and the lens will not move. How do I fix it?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon COOLPIX L18 Digital Camera

DMC-FX8 My camera is stuck at zoom-in. It basically disables everything else. Is there a way to fix it or even reset it? I tried the 'hold shoot button and power up" but that does not do anything. It does not reset it. Thank you all in advance


If the lens is jammed in the out position you can try holding the camera firmly and tapping/hitting it against your hand with the camera on. The lens should then retract. If this doesn't work or if you are afraid of dropping it (do it on your bed, ... Panasonic Lumix DMC-FX8 Digital Camera

I have a fujifilm and took it on holiday with me in july this year, half way through the week an error came up saying 'zoom error' and the zoom lens goes straight back in after it comes out! this meant that i couldnt take any pictures. After a while it started working again and the error seemed to have disappeared! however this error has returned and it has been like this for nearly a week now and won't fix, is there a cheap and eays way to get it fixed as i dont have a lot of money and the came


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\012\01 ... Fuji FinePix Z2 Digital Camera

The zoom lens stuck at 35mm. It could not move smoothly.


... Panasonic Lumix DMC-L1 Digital Camera

My lens is stuck open and all the way out after zooming on a cold evening. The camera turns on, lights up showing G( window and then beeps and goes dark saying 'lens error, restart camera' at


If any amount of moisture has entered the camera this will not be a user fix, it will require service. ... Canon PowerShot G9 Digital Camera

Fuji film finepix f20 zoom error. it's stuck and won't move


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix F20 Digital Camera

Zoom broken my camera was on then bed & the zoom was out to normal level. i tripped and fell on it & now the inner bit of the zoom is wedged at an andgle and wont move. i tried turning the camera on to see if it could move it at all itself and the mechanism tries 5 times then gives up and the camera turns off without turning the screen on. Does this sound fixable as i only got it xmas '07 and my dad never took out the insurance. If yes any ideas where I could take it/send it to get it fixed? I l


The impact damaged has jammed you lens assembly. I see these all the time in my shop. If it can be repaired without parts a shop should be able to do it for you for around $75. If it needs a new lens however it will not be worth the cost (the part ... Olympus FE-210 Digital Camera

HELP!!!!! I have a dimage Z5 and the lense is stuck. It is zoomed all the way out and won't come back in! The focus is zoomed to the max as well and it iwll focus at this point but everything is way close up. Please help. To send it back to Sony is atleast a min. of $181..... The camera is almost 2 years old and I have babied it to death! Thanks.


Does the barrel fully retract when the camera is shut down?\015\012I suspect a mechanical problem... If you're not very technical, I do not recommend opening it up...\015\012Try whapping the objective a little. I'm not kidding; the problem may be cau ... Konica Minolta DiMAGE Z5 Digital Camera

Megxon C480 When I turn the camera on the zoom does not move. It sounds at though it is trying to move but I hear only a rattle. The display shows: Zoom Home Error SW! Can you help me fix it? Janet


... Megxon X32 Digital Camera

I have a Nikon D3000 SLR. My lens zoom should range from 18-55mm but for some reason it won't go past 24 (so is stuck from 18-24mm) I have tried everything to fix this, including changing settings and taking the lens out etc, but nothing seems to work. I have had it for a few months and the zoom has always been fine, but has now suddenly got stuck.


Whatever you do, don't force it. Unlike your camera, which has just a 1 year factory warranty, Nikon lenses are warranted to be free from defects for 5 years; and is likely still under warranty.Contact ... Nikon D3000 Digital Camera

On my Fuji s2000hd I have a zoom error, the screen is black and I can't take pictures. The lens will not zoom out. I believe that my husband put the lens cap back on before the lens had gone all the way in when he turned it off but I am not positive that is the problem. The lens seem centered and there doesn't appear to be anything blocking it from coming out. Is there a way to fix this?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S2000hd Digital Camera

The battery is fully charged. When I turn my camera on, it zooms out, then zooms in, then zooms out, then zooms in, etc. After doing this for about a minute, it finally stops and the screen reads ''Turn camera off and on again.'' But that doesn't do anything. The same thing happens the next time. Is there a way to just reset the camera or do something else to fix it? It is a SonyDSC 150


Try a manual reset...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Digital Cameras

Broken zoom my camera was on so the zoom was out and i tripped and landed on it. now the inner part of the zoom is sat at an angle, wont move in or out & when i turn it on you can hear it attempt to push it out fully 5 times while the orange light flashes and then it gives up and turns off without the screen starting up. Does it sound fixable or is it time for a new camera? I only got it last xmas. Any idea where the best place to take it for fixing is? I'm based in Milton Keynes


You may want to call Olympus Customer Service to discuss their repair policy and procedures. They will have suggestion as far as repair goes or give you a local place to take it for service. Their telephone number is 800-622-6372 option 2 and then ... Olympus FE-210 Digital Camera

On and off switch... Replaced batteries in and out... Gently moved zoom... To no avail... It's stuck in the out position... i get a 'zoom error' message and can't take photo's... When it shuts off the zoom stays in the out position thanks mm


You cannot DIY that. My suggestion is send it to a technician for repair. Some gears are stock up that's why the zoom is in the out position. ... Fuji FinePix A700 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1257 seconds