Having problems with your Pentax Optio S10 Digital Camera ?

My Pentax Optio S10 digital camera is giving me problems. Initially the lens would not extend fully and would then immediately retract and the camera would then turn itself off. After cleaning the extended lens barrel each time it extended, I found it would open further each time. It nows extends fully, but still retracts immediately thereafter. At the time the screen shows the green Optio screen for a split second and then shows an out of focus shot of whatever the camera is pointing at, bef


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Pentax Optio S10 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Pentax Optio S10 digital camera is giving me problems. Initially the lens would not extend fully and would then immediately retract and the camera would then turn itself off. After cleaning the extended lens barrel each time it extended, I found it would open further each time. It nows extends fully, but still retracts immediately thereafter. At the time the screen shows the green Optio screen for a split second and then shows an out of focus shot of whatever the camera is pointing at, bef


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Pentax Optio S10 Digital Camera

Samsung L100 camera, battery charger shows battery is fully charged, camera powers on, lens extends then immediately retracts and camera beeps three times


Original Brand : SAMSUNG\015\012Original Model : TL100\015\012Cell Type : ... Samsung L100 Digital Camera

The screen on my M380 does not show the image. The camera is fully charged and when I press the "on" button, the lens extends and opens. The screen is illuminated, but there is no image of what the picture will be. I can go ahead and take a picture -- it makes the appropriate sounds as it normally would and the flash goes off if needed. In fact, when I then plug into the computer, I can see that a picture was taken. However you cannot focus the shot because you cannot see the image on the s


This can be a settings problem on your camera, so what we can try doing here first is to reset or restore the camera's settings to its default and then after doing that power off the camera and take the battery out for 5 minutes then put it back in a ... Digital Cameras

Hi, i have a canon digital IXUS55. 5.0 mega pixels. last night at a wedding the camera (fully charged) stopped working. it would show me the pitures on the memory card but wouldnt allow me to take any (memory card was only half full). The screen was black with E18 in the bottom left corner, it also beeped 6 times and the lense made a horrid noise as it came out. any ideas? it wasnt dropped or didnt get wet. help


... Digital Cameras

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work.


*&%$@#%^&*&^% !!"It's working!!!!\015\012\015\012Turn your camera on and put it near your ear. Did you hear a softly motorized sound in the lenses area and the green LED is flashing? If you hear this sound do this.\015\012\015\012Do it under your own ... Panasonic Lumix DMC-LC33 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on


Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.


Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

I plugged my camera in to a portable printer for cameras and ever since it hasnt worked, It first said lens error and the lens would extend half way, But now the lens extends fully but the screen is blank, Nothing comes up if it plugged into a usb slot either, Please help


You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

Lens problem Hi. I have an Olympus FE-190 digital camera. not sure what happened, but now there is a problem with the lens. when i turn on the camera, the lens extends, retracts, several times (trying to find "home" I think). Image on the display screen is blurry. it WILL take a very blurry picture. there is a faint 'ratcheting" sound when the lens is fully extended. is there a way to 're-set" or calibrate the lens extension setting or focus? thanks very much for your assistance.


Take it to Best Buy for repair. ... Olympus FE-190 Digital Camera

Canon IXUS 85. Last time i used my camea was last night, it worked fine when i went to show a friend a video i had taken and it worked fine, i don't remember knocking it, but i went to turn it on this morning and the screen was blank, i fully charged my lithium battery and tried again, and took the memory card out, put the picture on my laptop and put the card back in at the same time as the battery. I tried to then turn the camera on and it went on showing the sceen for a second before going of


It may be a lens problem...try these:\015\012Fixing a Lens Error on a Digital Camera\015\012\015\012This has t ... Canon PowerShot SD770 IS / IXUS 85 Digital Camera

Drained batteries I have a FE210 digital camera the batteries go dead after a few pictures yet when I check the batteries they era good. purchsed 4 aa size batteries-had 25/30 shots. bought 2500mah batteries, charges fully-- had 20/30 shots or half an hour of camera operation and battery shows empty on screen. tried a couple of times but in vain. the empty batteries are inserted in other digital cameras, its running fine. checked the camera with olympus authorised repair agency, they say camera


Digital cameras do use a lot of power to operate. Somethings can make the batteries die faster. Even if the batteries may have worked in other cameras after ou used them in yours could just be that the other camera requires less power to operate th ... Olympus SP-550 UZ Digital Camera

Operating manual The only manual I received with my camera was for basic operation. I do not know how to change the date, time on my camera and I would also like to view slide show without all that printed information on the screen. Is there a way I can get a complete operating instruction manual for my camera?


Go here: http://www.vistaquestusa.com/pages/products.htm then click on 5MegaPixel. That will take you to where you can choose the right camera. Click on the 5015. On the popup page, click on your preferred language beside user manual. It will open a ... VistaQuest VQ-5015 Digital Camera

T1235 camera - battery is fully charged, but lens will not extend and camera can not be shut off once it is turned on. I have to take the battery out for it to shut off. The LCD screen shows blurry image of what is seen through **** in lens cover. No error messages are shown.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Polaroid t1235 Digital Camera

My polaroid i1037 camera shuts off immediately when it is turned on. It starts to turn on, then the screen shows the word "goodbye" and then the camera shuts off. I have tried new batteries several times, but it does not help.


They're usually very reliable but if yours broke maybe you should checkout www.justdeals.com theyve got the i1037 for 40 dollars plus fast free shipping ... Polaroid I1037 Digital Camera

DIGITAL CAMERAS HDC571 i WAS GIVEN THIS FOR CHRISTMAS 07 AND PRIOR TO THIS WEEK HAVE USED IT ONCE BEFORE. tHE BATTERIES SUPPLIED RAN OUT SHOWED NO POWER ON THE SCREEN SO I HAVE REPLACED THEM. i HAVE SICE TURNED ON THE CAMERA IT THEN INSTANTLY TURNED ITSELF STRAIGHT OFF AND WOULD NOT COME BACK ON. ATFER SOME TIME IT CAME BACK ONAND I TURNED IT OFF BUT NOW WHEN IT TUN IT ON ALL IT DOES IS FLASH ON AND OFF AUTUMATICALLY.


The camera uses a TFTLCD monitor, which is a high power usage device, any battery that are not high power will have the same results as you do (I have the same camera and done the same with cheaper batterys).I will say go to a supermarket ... Hitachi Digital Cameras

Camera problem Hi. I have a Pentax Optio M20 Digital Camera. When I hit the on/off button, the camera turns on, the lens zooms out for a second and then back in, then it shows the "Pentax Optio M" load screen, then it shows "Auto Picture" in the center and a green dot in the bottom left with the words "EV Compensation" next to the dot. While it's showing this last screen, it beeps 3 times right before the lens zooms out again then back in just before the camera turns off. I have changed the batt


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

Powershot A560 I have a Canon Powershot A560 but now when I turn it on it beeps 6 times and the screen shows "canon" in blue but then goes black and says at the bottom "lens error, restart camera". Also, then lens never fully goes in or out. Help.


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot A560 Digital Camera

He lens extends and retracts 3 or 4 times and after the last movement, the screen shows "turn off and on camera". If I turn it off and then on again, It'll do the same routine again.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Sony Cyber-shot DSC-W130 Digital Camera

I have a DSC W 110 sony cyber shot digital camera...since some days its flash would nt work and an error msg E 91 01 is showing up on the screen..i tried reseting and initializing it many times..but all in vain..plz tell me what to do..i need a solution for the same model..plzz do help me


Hi!\015\012\015\012E:91 is a flash error. The flash fuse on the main board or the flash board is bad. Contact your local Sony service center, but\015\012if they ask too much, you can contact me at [email protected]\015\012and I will give ... Sony Cyber-shot DSC-W110 Digital Camera

The lens extends and retracts 3 or 4 times and after the last movement, the screen shows "turn off and on camera". If I turn it off and then on again, It'll do the same routine again.


... Sony Cyber-shot DSC-W130 Digital Camera

I have purchased two Kodak C143 Digital Cameras since August of this year. The first one, only had for a couple of weeks, worked great at first and then when I would turn it on the lens would come out but there would be no screen at times. At other times the screen would disappear after a couple of seconds, but the lens would not close. I tried taking the batteries out and putting back in, but that did't help. I then took it to K-mart where it was purchased and they told me that it must be the c


... Kodak C143 Digital Camera

Twice recently, I ordered an OEM battery model LI-42B on-line, but both times, after fully charging the battery, the camera does not operate properly with the replacement battery. Once the camera would not turn on, the other time I was able to take only 2 pictures, then the camera would not retract the lens. Have other people had similar problems with OEM batteries? How can I be sure to get a battery that will work with the camera? My camera model is Olympus Stylus 7010 12 megapixel.


This doesn't sound like a battery problem. It sounds like a lens problem. Read this article:\015\012Fixing a Lens Error on a D ... Olympus Stylus 7010 Digital Camera

Screen my camera turns on fine, but nothing shows on the screen. i fully charged the battery and it still doesn't show anything on the screen. you can take a picture, but the screen is still blank. when i tried to connect my camera to my computer it said connection fail!...does anyone know how to fix this?? or what's wrong at least?


The screen can be switched off to save power! Make sure screen is set to on position ... Sanyo VPC-E760 Digital Camera

A85 camera LCD shows up with pink and black lines every time a picture is taken. LCD screen displays the camera icons on LCD screen but will not take anymore photo's. Lens used to view picture status prior to photo shot but now, it consistently shows up in black. When a picture is shot, the screen then turns pink and black on the LCD screen.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A85 Digital Camera

Lens problems I am deployed and I sent my camera to my wife and she has managed to brake it, I was hoping to get some help on this problem: When off, the camera lens is in the position as if it were being used. When turning the Canon Camera Powershot A530 on, the Canon logo screen comes on as it should. Following the blue logo screen is 2-3 rapid beeps made by the camera and a black screen is shown with the words, "Lens error, restart camera". Immediately after showing this screen for five


Try opening your camera, check the lens gear if its teeth are\015\012complete. If so, check if something stucks on it. Its much better to\015\012bring your camera to an authorized service center to re timing your\015\012lens track... ^_^ ... Canon PowerShot A530 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4577 seconds