Having problems with your Philips PJ44432 Digital Camera ?

I recently bought a new computer with windows 7 on it..........i have a phillips pj44432 digital camera. my new computer doesn't see the camera......what can i do to get the computer to see the camera. It worked on the old computer with windows xp

Answers :

It may or may not work, but try installing as Administrator and setting the program's EXE into "Compatability Mode for XP SP2",and also, running as Administrator. Also Disable UAC too. Windows 7 just doesn't want to support any hardware over like a year old... Drivers are a HUGE issue. Especially for older stuff. Compatability Mode is one way round it but not always. Also you will have to set to OFF digital Driver signing at bootup press F8, and at the bottom you will see driver signing.... EVERY TIME you boot you MUST set this OFF, or it will simply not work, thats if it does install anyway. You MUST have it OFF to install as well.\012
There are newer drivers than have been released. The link for the newer driver can be located here:\012
\012Hope this helps,\012
\012Andrew\012Don't forget to vote.
Repair Help & Product Troubleshooting for Philips PJ44432 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I recently bought a new computer with windows 7 on it..........i have a phillips pj44432 digital camera. my new computer doesn't see the camera......what can i do to get the computer to see the camera. It worked on the old computer with windows xp

It may or may not work, but try installing as Administrator and setting the program's EXE into "Compatability Mode for XP SP2",and also, running as Administrator. Also Disable UAC too. Windows 7 just doesn't want to support any hardware over like a ... Philips PJ44432 Digital Camera

Have Nikon Coolpix 885 dig. camera, bought in 2000, still works OK. I had been transferring the photos to my old computer using "Nikon View" 5 version 5.0.0 software that came with the camera and my Windows XP operating system with no problems. I now have a new computer using Windows 7. This is my question: Will it be OK to install the original "Nikon View" 5 disk with Windows 7 or is there a newer "Nikon View" software to work with Windows 7 and my old Coolpix 885?

Nikon View has been superceded by Nikon Transfer and Nikon ViewNX (the transfer and cataloging/viewing\302\240functions have been separated). You can download\302\240the\302\240current versions of all (free) Nikon\302\240software fromhttp://su ... Nikon Digital Cameras

Hello there,........i have a samsung digimax s500cyber530 that i bought appox: 4 years ago?,.....and we just several days ago replaced an 8 year old gateway "windows" computer w/a brand new HP computer w/windows 7. my camera worked perfectly w/the old gateway,.....but it not only wont download/delete the pics from the camera into the new HP,...the camera is also in a "dead state and wont work at all" until i open the battery compartment and shuffle the batteries around!!! what going on,....and i

Once you get the camera working again by the "shuffling technique", don't connect it to the computer again. Instead, purchase an inexpensive card reader and use it to download pictures from now on.\012 ... Samsung Digimax 530 Digital Camera

My computer does not recognize that the camera is connected to the computer. It has never worked since I bought the computer, HP Pavillion with Windows Vista. Worked fine on old Dell but can not get any transfers from camera directly on this new computer, only from SD Card.

Do what the pros do...use a card reader instead of the camera. ... Nikon COOLPIX L5 Digital Camera

My old computer crashed and I bought a new toshiba laptop but driver disk and the camera connector to the computer won't work since the new one is all usb ports. How can I still use my camera with windows 7?

Google the model and make of your camera with the words FREE DRIVER and see what comes up\015\012You may get lucky enough to find a driver ... Agfa ePhoto 1280 Digital Camera

I have installed the olympus disc Camedia for a C-740 camera in a new computer. When I try to download pictures the computer cannot see the camera. THe same files work fine in the old computer. I Have tried removing and reinstalling the program.

The software is not compatible with vista... it will work, you just have to transfer from media and choose your removable disk drive that represents your camera ... Olympus Digital Cameras

I got a new computer & my old software for the USB won't work. Where can I get anew one for a new computer? Or can I? I have a Vivitar 2800 camera. The computer is windows XP.

Unfortunately no software may be compatible with this camera due to its age. I believe it is only supported with up to windows 98. You can try this driver here: ... Vivitar ViviCam 2800 Digital Camera

My camera is several years old. I just got a new computer with windows vista. Can I install your software, version 5.2 which says for windows OS? I have a printer that works with the camera, I just need to know if I can download thepictures.

Windows OS usually refers to all versions of windows (95/98/ME/XP/VISTA) ... Digital Cameras

Windows Vista can't find my camera. This is a new problem as it worked fine last winter.My old computer with Windows XP has no problem. Control Panel - Scanners and cameras shows the Canon A80.

Canon did not update the drivers for many of its older cameras for the Vista OS, the A80 included. In other words, you cannot directly download from the A80 using Vista. Please see the following blog article, as it describes the use of a card reader ... Canon PowerShot A80 Digital Camera

Memory card Our old memory card stopped working in the camera. It said "memory card error". I bought a new card, 8gb duracell sdhc card, and when I put it in it said"memory card error" again. I tried formatting the card but it would not allow me to. I put the card in my computer and the new one works fine. I gave the old card to my brother in law to look at it, but he is on vacation, so I can't test it in my computer. I put the card that came with the camera in and it works fine, but it is a mmc

Unfortunately, the A520 does not support SD memory cards with more than 2GB capacity, and doesn't support SDHC at all. (1GB max for MMC cards.) I know memory is much cheaper than when the camera first came out, but in 2005 2GB was about as large as y ... Canon PowerShot A520 Digital Camera

With my new xp computer, my camera from my old computer (old windows),gives me an error message of "camera not found". This capability was supposedly transferred from the old to the new computer. Do I download the driver for this camera. I have no ideal!

... Jazz JDC27 Digital Camera

I cannot get Camera Wizard to appear when I plug in my S5000 camera. I have Windows XP on my new computer, as I did on the old one (where it worked perfectly!). I have run the Installation disc but still no joy! I get the connection sound but nothing appears. Please help!!! Pat.

Did you try to see if there are any updates to the program since it is on another computer? You can always remove the memory disc and plug it into the computer if all else fails. ... Fuji FinePix S5000 Digital Camera

Put Kodak DX6440 digitial camera in dock, press the transfer button, hear a 2 tone beep that goes from low to higher pitch. Am on a new Windows 7 computer, just downloaded the most recent version of EasyShare. This used to work fine on my old XP computer.

I suspect the problem isn't with EasyShare, but with Windows 7. This camera came out in 2003, and would not demand an updated driver from Kodac, like so many products these days. One has the choice of keeping their older computer hooked up to use ... Kodak Digital Cameras

No pwer I am a high school photography teacher who inherited 20 Canon PowerShot S1 IS cameras (going on three years old). I noticed a few last year that didn't turn on even when brand new fresh batteries were put in. The battery chambers are clean with no apparent damage. I am now up to 8 cameras with this problem. They won't even power up when hooked up to the computer for downloading. i even changed the date/time battery just to see but didn't work. Any ideas?

Well with a clutch of cameras showing the same fault - together with other queries of a similar nature I suggest you contact Canon on an\015\012Educational level- for a bulk replacement deal.\015\012There are obviously showing a common manufacturin ... Canon PowerShot S1 IS Digital Camera

SP 350 When I try to transfer images from my camera I get the message "The software is unable to find an Olympus digita camera connected to your computer" This is a fairly new computer with Windows Vista. My old computer had Windows XP. The new computer is a Dell Insprion. Any thoughts? I'm stumped!

The answer to your problem might lie with the OS you are using. For whatever reason, when Microsoft brought out Vista it broke a lot of old programs and devices that worked perfectly fine. Why backwards compatability is beyond Microsoft, I don't kn ... Olympus SP-350 Digital Camera

My Nikon Coolpix L18 wont allow me access to the photos on my camera through my Windows XP computer that has the software but it works perfectly fine on my Windows Vista computer that doesnt have the software. Have reinstalled software twice and reset the computer multiple times AND the Nikon transfer program doesnt work on my XP version

Use a card reader to download your pics. ... Nikon COOLPIX L18 Digital Camera

Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the

Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera

I got this old polaroid digtal 320 camera ,i got this new mimi laptop computer have window 7 ,no software, and the cable are diffent how can we make this work. thank richard

... Polaroid PhotoMax Fun 320 Digital Camera

Videos play on camera, not on computer. Why? How to fix? I took SD memory card out of camera, plugged into computer, copied direct to computer. The video files never play. the Intelli software required to transfer and convert video files to make them work properly? I changed form Windows XP computer to a new Windows 8 computer. Also, a separate issue on another SD memory card, copying SD memory card to computer, many files not recognizable, can't locate. Might be problem with that SD card. This

... Samsung PL200 Digital Camera

Have old Olympus D-510 and Camedia Master 2.5 Software. Used software back with old Win98, then new computer to Win XP, downloaded update for 2.5 to work with XP. Now have another new computer with Windows 7. Question no. 1 - A friend who is a computer technician told me I dare not download any older software programs as they could ruin Win 7 operation. He said go to websites and download new software. Got to this site it says it can run a scan and replace driver or whatever is needed, but

Your friend is correct...you could cause problems trying to install an old software program on Windows 7 (although it probably would just reject it). Windows 7 sometimes comes with photo editing software already loaded. If not, there are free program ... Digital Cameras

Windows Vista!!! When I plug in my cord from the camera (Pentax Optio S5i) to my new laptop with Windows Vista I get a message saying it can't locate Pentax driver and this isn't supported by Pentax??? or something like that.  My camera is not that old.  Is there any way I can get my camera to work with Vista?  I can't even get it to recognize the camera when plugging it into the USB port so it's not a software issue.  HELP I do not want to have to buy a new camera!!!!

There's quite a simple fix to this. Disconnect the camera and turn it on. Press Menu and move to the the little 'tool icon' tab. Under 'USB connection', change the setting from PC to Pictbridge. Press OK. Connect your Optio to your P ... Pentax Optio S5i Digital Camera

On my Olympus FE-340, the pictures i see stored on my camera are not the same ones i see when i try to download pictures to my computer. in the dcim folder i see when attached to computer contains only some old photos, but not my new ones, which i can see only on the camera. is there an internal card which has space separate from the memory card?

Having gone over a month with no response, I assume this is no longer a problem. ... Olympus FE-340 Digital Camera

Got olympus camedia C310 and just bought new laptop running windows 7, have loaded the camedia software but cant copy new photos from camera to laptop, laptop doesnt seem to recognise camera - does nothing at all. Is there a fix, I am guessing the problem is windows 7, already had to buy new printer as didnt recognise old one

Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Olympus Camedia C-310 Zoom Digital Camera

Compatability I have a Sony DCR-TVR17 digital Handycam that worked fine for downloading pictures to my e machines desktop computer with Windows 98. Recently I bought a Sony Vaio VGN-NR498E with Windows Vista. I can no longer download pictures to my computer from my camera. I suspect the problem is a compatability issue between my camera and Vista. Is there a new driver for my camera for Vista?

... Sony Digital Cameras

My dell inspiron (with windows vista) is not recognizing a new Canon G10, so i am unable to download photos. i have tried all the suggestions in the Canon G10 manuals for troubleshooting and have followed all of the instructions for connecting camera to computer, but nothing works. the Canon website says that there are no drivers required for this camera with windows Vista, and provides no drivers that can be downloaded. My computer does not recognize that the camera is attached when I look in D

You can download the vista drivers here on link below. Just click on the drivers and downloads in link. Them click on your operating system and pick vista or vista x64. Then go down to the next box software 2 down.\015\012\015\012 ... Canon PowerShot G10 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6163 seconds