Having problems with your Polaroid CTA-01234S Digital Camera ?

Camera turns on then shuts down 5 seconds later


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Polaroid CTA-01234S Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I turn the camera on.4 seconds later it says turn the camera on and off. Then shuts off.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Panasonic Lumix DMC-FX01 Digital Camera

I hadn't charged my w330 Sony camera for a while ....I've only had my camera for 6 months...and it's warranty is 2 yrs. The camera is in good condition, yet when I charged my battery, and later put it in the camera, I turned on the screen and a few seconds later, it said for compatible battery use only....later i took my battery out and held the power switch button for like 30 seconds and then put my battery back in. My camera still didn't work, but i don't want to go to special services because


In order to avoid people using 3rd party batteries, electronics manufacturers have started putting smart chips in the battery packs. The camera interrogates the smart chip and if it isn't the Sony chip, the camera tells you "too bad."In ... Digital Cameras

My kodak digital touch screen camera got dropped now when i turn it on about 5 seconds later it shuts off


... HP Photosmart M425 Digital Camera

Camera turns on then shuts down 5 seconds later


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Polaroid CTA-01234S Digital Camera

Shutter malfunction few weeks ago I moved and when I began unpacking and got to my camera, I discovered that something had spilled in the box and was coating the camera. I dried it off as best I could, and turned it on. It worked normally. A few days later, I noticed that whatever had spilled on it, that I hadn't been able to clean off, formed a strange gel like coating around some of the buttons. I again cleaned off what I could get to, and again, turned the camera on, and about a second later,


It sounds like a part of your electronic system shorted. It's unusual anything works at all. \015\012THe front and back housing fit together like a **** shell. After you have removed all the screws gently pry a thin blade between the halves and ... Nikon Coolpix L11 Digital Camera

I have a FinePix Z1 I have installed a new battery and it is fully charged. The problem is that the camera shuts down within 20 seconds. I slide the front and it restarts only to shut down again. I have reset the camera via the menu and every time I try to go to the menu the camera shuts down. I have just taken 22 pictures went to the menu to turn off the lcd saver and the camera shut ndown Please help


I had very similar problem. There is a small sensor flap near the hinge in the battery compartment which tells the camera if the battery door is closed or not. If it wont work properly it gives signal "battery door open" and camera will shut down, mi ... Fuji FinePix Z1 Digital Camera

The following is not a battery problem and the camera has not been dropped. It worked normally, I turned it off, and the next day when I turned it on, here's what happened -- and has happened consistently since then: I turn the camera on. The lens extends fully. I hear 4 distinct buzzing sounds from within the camera. The LCD flashes with an image for a split second. The lens retracts fully. I hear 3 beeps from within the camera. The camera shuts itself off. All this happens in not more


Your camera has a lens error. This\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012generic answer below. ... Casio EXILIM Card EX-S770 Digital Camera

Hi, My Yashica EZ F9 Zoom will not turn on. The "on" green light will flash for a moment but then the camera shuts off within seconds. I put in fresh batteries, new memory card, and nothing happens. I can download pictures that I already had on my previous memory card onto my computer, but it won't let me take any pictures because the camera won't turn on for more than a couple of seconds. Please help...


Sound like a problem with the lens stuck; is common defective that need new lens unit replacement or just repairable.This has to be THE most common failure mode for a digital camera. Some \015\012com ... Digital Cameras

Help The last time I used my camera a maybe a week or two ago, it shut off because the batteries died and the lens never pushed back in. So, I just now went to turn it on after putting in new duracell batteries in, which I have used all different kinds in my camera, I have it sent so that the Samsung icon is on as it starts up. So that came on and after a second you can see on the LCD screen but it is blurry and after a few seconds I hear 3 loud annoying beeps and then it shuts off. What could b


The 3 beeping sound as ou call it annoying means that the camera has low battery capacity. the lens is stuck out because there is incorrect battery connection. there is an option on the camera setting for the battery type. try this one:\015\012 ... Samsung Digimax S630 Digital Camera

Digital camera I have a digital camera (Pentax Optio A10) and just recently the camera stop working. Every time I turn on the power button, the lens zoom out and a few seconds later the camera will turn off, and the lens will come back in. I bought a new battery thinking it help, but it still does the same thing. The camera is not even 2 years old yet and I paid over $300 for it. HELP?!?!


I had almost similar problems with my A10 from day one. The camera shuts down before the battery is depleted, most of the time while I was operating the zoomlens. I bought a new battery, but that didn't solve it. Later I decided to take it apart as a ... Pentax Optio A10 Digital Camera

My camera was working perfect and then i turned it on to look at pictures and it turned on for a split second and then shut off, my lens is stuck out now and it wont turn back on, i even bought another battery to see if that would help and both batteries are fully charged the green light comes on and NOTHING happens. HELP!!!! I am going on vacation in a month and i need a camera!


Hi,I am Sorry to hear regarding the Problem.This is a ' Lens \015\012Problem ' which is Quite Common on \015\012these Models.It is not worth to get it Repaired, as the Cost of \015\012repair would be quite high as compared to ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

My camera will not stay on. It turns on for about two seconds, the screen says Sanyo then shuts off. I took the camera apart to clean it and to make sure it didn't get wet and the problem still isn't resolved. The 3X optical zoom is also stuck out and when I turn the camera on, it sounds like it is trying to pull it back in but can't


If you actually took the camera apart, you may have damaged some components. You also might be the luckiest person ever and no damage was caused. In that case, try these:\012\012 ... Sanyo Digital Cameras

I have a furjifilm finepix z200fd camera. I actually have two of them. I bought one and had it a year and it just stopped turning on one day. I bought another, cuz i liked the camera and just thought it was something we did to break the first one. a few months later the second one just stopped turning on. i think it may be the slider to that you slide to turn it on. Is there any ideas on what to do to fix it?


... Fuji FinePix Z10fd Digital Camera

I have a Minolta Dimage 7Hi and get a 'card error' message when I turn it on, in the middle of the viewing screen. The camera acts like it takes a picture without the button being pressed, then the red light next to the card goes on and off for about 10 seconds. Then the camera shuts down. It repeats this when I turn the camera back on and doesn't respond to any other settings or button pressings. Can you help?


Format CF memory card to FAT16 - 7hi does not recognize FAT32 nor NTFS ... Konica Minolta DiMAGE 7Hi Digital Camera

The battery is fully charged. The camera comes on for about 15-20 seconds and then the message comes on the screen:Please turn camera off and then on again.' when shutting down, the lens remains out. I have taken the battery in and out several times- no change. Not dropped or wet- no reason , it just started not working. Tried checking on the driver to do update available on the website, but it shuts down. Any hope for it? Love the camera!!! until now :-(


HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will ne ... Panasonic DMC-TZ5 Digital Camera

When Mode switch is set to take pictures or clips, the camera shuts down in less than a second after I turn it on. If the Mode switch is in the far-left position (review pictures already taken), it stays on and I can see all the pics in the camera, but as soon as I switch to picture-taking mode the camera shuts down.


Since u say ur having difficulty reassembling the unit back.... please refer the following.... it shows disassembly procedures for a similar model camera... this is as far the closest i could find to help you reassembling the unit... just apply rever ... Sony Cyber-Shot DSC-S40 Digital Camera

Low battery? I got my camera today, setup the setup menus, and had started to check out the features when the low battery warning came up. So I replaced the batteries and tried to turn the camera on but now all I get is the green light comes on for 3 seconds, goes off and approx. 5 seconds later the light flashes on, then off and the camera beeps 3 times, and nothing after that. The lens does not move at all. I went out and bought brand new batteries that were industrial strength and tried those


Cameras belonging to the S Series really do have a battery type option that needs to be set up first before taking any pictures for proper power connection.\015\012\015\012Recommended batteries are just:- Alkaline (Non-rechargeable) ... Samsung Digimax S630 Digital Camera

When I turn on my Kodak Z740 camera it only stays on for about 3 seconds then it shuts off completely. When I turn it on, the lens moves out then back in, then shuts off. The battery is one I bought fairly recently, I tried taking it out, leaving it out for seversl hours and putting it back in, this did not help.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Kodak EasyShare Z740 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work.


*&%$@#%^&*&^% !!"It's working!!!!\015\012\015\012Turn your camera on and put it near your ear. Did you hear a softly motorized sound in the lenses area and the green LED is flashing? If you hear this sound do this.\015\012\015\012Do it under your own ... Panasonic Lumix DMC-LC33 Digital Camera

Error message I have a panasonic DMC-LC33 digital. A system error message would show the minute I turned it on. The lens would come out. Then within 4 seconds the lens would go back in. I tried the on/off several time but the results were the same. I put the camera away for later. When I tried it the other day, it would not even turn on. The batteries are fully charged. Help!!!!!! I need my camera for my work. hi expert i m suffring in this error on my panasonic DMC-LC33 when i switched on


Try \015\012\015\012Klomtrix trick this worked with my camera\015\012thanks klomtrix ... Panasonic Lumix DMC-LC33 Digital Camera

My Kodak V1233, isn't working right. If I turn it on, it will only turn on a second and extend the lense and then shuts off (it's fully charged). I can eventually get to take pictures, if I start by hitting the favorite button, and then the camcorder button and then quickly hitting the the camera button. I can take pictures, but can't see them, I only see a black screen. The camera will not power off this way. If I take the battery out, and then put it back in, and hit the favorite button,


I have had the exact same problem this seems to be a common flaw in this model i do not suggest any one purchase the V1233 ... Kodak EasyShare V1233 Digital Camera

CAMERA TURNS ON FOR A SPLIT SECOND THEN SHUTS OFF


Simply change the batteries as the batteries are unable to tale the load internal damage because of not using regularly. ... Kodak EasyShare Z1275 Digital Camera

I have a Sanyo VPC-S880 Digital Camera. When I first got the camera it was great no problems at all, then out of the blue about a month later, I connected it to a USB cord which was connected into my computer(like any other time) to download pictures. Well the camera shut off and I can't get it to turn back on. I have put new batteries in it & everything, I just can't figure it out. I love this camera, please help??


Take it to sanyo service,since it is the failure of mother board of the camers ... Sanyo VPC-S880 Digital Camera

Charging Problem Charging appears complete after about 15 minutes. Normal charging time is 90 minutes. When the camera is turned on the oblong battery level indicator is filled white where previously it contained diagonal markings. The white disappears rapidly as the battery discharges within just a few minutes. Enough time to take a couple of picture. The camera then shuts down. I sent the camera to a repair company who at first said they could repair it. Later they told me the camera wa


I CAN T CHANGE MENU IT IS ONLY IN DEL MENU ... Panasonic Lumix DMC-F7 Digital Camera

When i insert the USB into the computer and camera i turn the camera on and wait a few seconds then the computer reads: camera is in use please try again later. what do i do?


Keep trying or try it in a different usb port or try a different usb cable. ... Nikon Coolpix L11 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4430 seconds