Having problems with your Polaroid i1035 Digital Camera ?

The date and time will not stay after setting, is there a flash update?

Answers :

This is a firmware glitch. If you disable the startup image, the date and time is not saved. To fix this issue, you must re-enable the startup image.

Turn on the camera and press Menu (M). Press the right side of the circular directional button to select the wrench. Press OK/Edit.

Next, navigate down to "Opening" and press OK/Edit. Select ON and press OK/Edit. Go back up to Date/Time and set the date.

Restart the camera to see if it works.

When you finish putting in all the data, press the set or ok button twice.
Repair Help & Product Troubleshooting for Polaroid i1035 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The date and time will not stay after setting, is there a flash update?

This is a firmware glitch. If you disable the startup image, the date and time is not saved. To fix this issue, you must re-enable the startup image.Turn on the camera and press Menu (M). Press the right side of the circular directional b ... Polaroid i1035 Digital Camera

I've had the 5700 since 2003, which at the the time I paid $1200 for it. E-Bay is now selling for a bid of $85. At any rate, I cannot manipulate the menu to make any settings. I have a flashing update icon for date & time, but cannot set. Also, the zoom control is unresponsive. I have no idea where to get an estimate for a repair & let's face it, the repair would probably cost more then what I can purcahse a new digital SLR camera for with more features than what I paid for the 5700. Any correct

This link will guide you for free estimates of reparing the camera.if its worth reparing after getting the estimate get it repaired.if its costly you can go for new.for reparing estimates cost of camera ... Nikon Coolpix 5700 Digital Camera

The date and time will not stay set. I set the date time . take pictures and when I shut the camera off. the next time I turn it on the date and time is zeros again...

The world of compact digital cameras is fast and furious blink and you'll miss the new model. These pocket point and shooters are cram packed full of features that most people neglect to utilize. So it's uncommon for the problem you describe to occur ... Canon PowerShot A710 IS Digital Camera

Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?

The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.

To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

When i set my time and date it wil not set. what i mean is it stays that time and date even when i press menu/ok to confirm it.. any suggestions???

Let me see if I'm understanding the question. You set the date and time and go ahead and use the camera shut it off and go to use it again and you need to set the date and time again. If so you need to replace your cameras internal battery it's about ... FUJIFILM FinePix JV100 Digital Camera

Each time I switch my Casio Exilim ex-fc100 camera on, the set time and date menu appears and my previous setting are lost (like photo resolution, flash setting and so on) like it is re-set everything. This happens even if I do not remove the battery. Can you help me, please? Max [email protected]

... Casio EXILIM EX-FC100 Digital Camera

My casio exilim flash is not working I try to set the flash to on all the time or any other setting then off and it always stays the same how do I put the flash on?

... Casio Exilim EX-Z29 Digital Camera

The settings dont stay. every time i turn on the camera, i have to put in the settings of date time and everything

... Casio EXILIM ZOOM EX-Z60 Digital Camera

Date and time will not stay set

Have you changed the CR2016 clock battery? See the picture and sentence at the bottom of the following webpage:\015\012\015\012http://www ... Canon PowerShot A300 Digital Camera

No image on lcd,if you snap a picture,the picture will be black,camera has set up for a while.it will power up and show functions and set up info on lcd you can set time and date,but no image,flash works,but takes no picture,any ideas?

It is known problem of ccd imager chip failure in Canon A85 camera, Canon offers free of cost ccd imager chip replacement.Click ... Canon PowerShot A85 Digital Camera

How to set date and time and it stay on screan

Step 1: Determine the make and model of your camera.Step 2: Repost your query, being sure to include the information from Step 1. ... Digital Cameras

Date and time won't stay set

Had the same problem. The problem is a small button cell that needs to be replaced. From Canon's support page:http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a510?CMD=MIXED_SEARCH&mName=PowerShot+ ... Canon PowerShot A510 Digital Camera

AF problem Last week I took some pics that needed the flash turned off. I did that and took the pics with no problem. I turned the flash setting back to "auto" afterwards. (this may not be related to the current problem but does seem too much of a coincidence). Next time I went to use the camera, I got an AF(red dot) and a red hand on the screen. It would take one picture and then would be frozen (no zoom, no picture taking, but the screen would stay on). If I turn it back on I can then ta

Jangles,\015\012\015\012I am having the exact same problem. Have you found a fix ? ... Nikon Coolpix 5600 Digital Camera

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.

Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?

\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Every time I switch on my Canon SD 1100 IS is asks me to set date and time. I set date and time and then it lets me take pictures. Next time I switch it on again it asks to set date and time. How could I get rid of this.

The camera's clock battery has worn out. Unfortunately, on most Canon SD series, this battery is not user serviceable. Recommend contacting Canon to see if they'll replace it, hopefully at a reasonable cost. 1-800-OK-CANON ... Canon PowerShot SD1000 Digital Camera

I have just bought the Kodak M381 camera and when I set the date and time and click ok, the time is set but does not display on the LCD screen at any point, so when I review my pictures there is no way of knowing when I took them. You can date the pictures retrospectively but that takes time and will be incredibly tedious and you soon forget. In the manual it says to select the date time stamp but I am unable to find it in my set up menu and I'm beginning to think this camera does not have this

I had the same problem. I think the camera does not have this feature, to bad it was a nice camera ... Digital Cameras

I have an agfa Photo waterproof compact 109uw and i am trying to change the date on it. I go 'menu' then 'setup' then down to 'date & time' then across and change the date setting 'day, month, year' then down to time (which changed fine for me) but when i go back to 'date & time" it reverts back to the original date. What am i supposed to press to set the date?! thanks helen

... Digital Cameras

Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk

You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

The Coolpix L4 forget its date-time settings, and there is no way to set them. menu -> set up (ok)-> date (ok)-> date (ok)-> ... the result is "Time Zone" setup screen not the date.

Hi.\015\012\015\012\015\012Nikon cool pix settings are saved into an internal memory (20 MB EEPROM I think). \015\012\015\012\015\012The internal memory is kept alive by an internal rechargeable battery, that is r ... Nikon COOLPIX L4 Digital Camera

I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln

... Olympus Digital Cameras

My sony cybershot w220 is displaying E 91:01 and its flash is not working. I tried initialize and set date and time but the problem is not solved.

... Digital Cameras

I am trying to set date time in my camera(canon sx110is). But in every power on it is reseted. Whatever date i am setting in this camera is not stored in the memory. In every power on it asking for setting date and time. I need help in this regard.

You have to change the 'date battery'. Use the user manual to find its location.\015\012\015\012Mine is Canon A520, located beside the cable link sockets. Battery is CR 1220. ... Digital Cameras

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.

The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2172 seconds