Having problems with your Polaroid i1237 Digital Camera ?

When the camera is on it displays all the pictures but when i connect it a pc it says there is nothing on the memory card. Any ideas?

Answers :

Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.
Repair Help & Product Troubleshooting for Polaroid i1237 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Memory card error - After taking about 300 pictures on a 2 Gig Kodak SD memory card. I get a message on my Canon camera that says '' memory card error'' I tried to put the chip in a differant camera but it tells me to '' Format The Card'' I am afraid if I do that I will loose all of my pictures. I tried to load the pictures into my computer the way I always do and nothing happens. Any helpful ideas ? Thank You

Take no more pics until you've recovered the photos, take the card out of the camera. Here's some freeware photo recovery software th ... Canon Digital Cameras

When the camera is on it displays all the pictures but when i connect it a pc it says there is nothing on the memory card. Any ideas?

Consider NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or conn ... Polaroid i1237 Digital Camera

Memory Card my camera displays "this card cannot be used" or "Warning! this card cannot read" when it was working fine for the past few months.. I don't know what's wrong with it, the manual says what to do, but when I do it, it doesn't work.. I can't take any pictures with my memory card in now.. but without the card I can take up to five pictures.. which is dumb because it was working fine before.. and i did nothing wrong to it..help?

Maybe you need to buy a new card for your camera, the card was now defective and could not perform to the normal function.. ... Nikon Coolpix L11 Digital Camera

I have a panasonic dmc-lz2. a few days ago i tried to take a picture with my camera and it wont let me. it says ''memory card error'', and now when i stick my memory card straight into my computer...nothing comes up. every memory card that i put in my camera now does the same thing. any ideas as to what i need to do?

Format the card in the camera. This will erase it so download any pics first using a card reader if necessary. ... Digital Cameras

I have a sanyo vpcs1070, i currently have a 8 mb memory card in it. when i turn on the camera it says there are alot more pictures on my memory card than the camera will let me view. the sd card display in the corner says i have 797 pictures and when i go to the option to view my pictures the picture number display says 737..i am missing 60 pictures that i would love to view because they were of an awesome concert. can you help me please figure out how i can view the "missing" pictures???

Hi,Pictures read and write in series in memory card if its inside camera so if one picture file got corrupted for some reason, camera wont show next picture and will stuck there.Take out memory card from camera, plug it to in memory card ... Sanyo Vpc-s1070w Digital Camera

Kodak easyshare c613: memory card says its full when there is no pix on it, what happens is: i turn it on, says "memory card full", i go to review, says "no pictures or videos to display on memory card", exit review, says "memory card requires formatting" i choose to format it, says "formatting..." then its goes back to "memory card requires formatting", just keeps repeating it self. i inserted a new memory card same thing happens. the card use to work fine until one day it started saying this s

If you connected the camera to the computer with a USB cord to download your pics and then just yanked out the cord without using the "safely remove hardware" icon at the bottom right corner of your screen, the card may have been corrupted. Replace i ... Kodak EasyShare C613 Digital Camera

I have a Lumix DMC-FS3 camera and if I don't put a memory card in it, I can't take any pictures because it says "built-in memory is full". When I tried to delete any photos that maybe on the internal memory, it just says "no valid picture to play". I even installed a memory card and tried to copy from the internal memory to the memory card, but it said that there's nothing to copy. When I plug the camera into my computer, I can playback pictures. So I'm very confused as to what is on my internal

First of all, forget about using the built-in memory...it's very small. Does your camera work properly when a memory card is inserted? You could also go into the setup menu to "reset". That would set your camera back to factory defaults. ... Panasonic Lumix DMC-FS3 Digital Camera

When I put the memory card in the camera it says 'cannot read' it. How do I format the card? I know it has the right 'size' memory. The memory card I am using is the same one I used a few months ago and I saved the pictures I took to a computer and erased the pictures off the card. Now as soon as I turn the camera on it says 'This card cannot be read'. Im frustrated as there is nothing in the manual that seems to get my camera working again. I have only had it for a year. Please HELP!

Do not use the computer to erase the card. This is the reason your camera no longer recognizes the card. Now you need to format the card in the camera to get it to work properly. ... Digital Cameras

My Canon Powershot A560 memory card is locked and it is the camera doing it not the memory stick.And there is nothing in the manual about how to fix it. When I turn on my camera I get an error message"memory card error" then when i press to view pictures it says the memory card is locked and turns itself off. I have had this camera for some time and have never had issues uploading pictures onto my computer or with the memory card.I really would rather not lose the pictures that are on the camer

Remove the memory card from the camera. Note that there is a small slide switch on one of the long edges of the card. Slide the switch to unlock or lock the card. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

When I put my memory card in my camera it says Err Cf and won't let me take pictures and won't show any of my previous pictures on the card on the screen on the camera. When I put the cf card in my card reader and plug it into my computer, nothing happens. The computer doesn't register the card at all and I tried putting a different memory card in the reader and it worked so it definitely isn't the card reader that is the problem. I don't care if the card is broken but I have a bunch of picture

Hi There.It sounds to me from what you described that the card has gone. Unfortunately , with volatile memory such as flash drives or memory cards a recovery is usually not possible as the chip where the data is stores is destroyed. ... Canon Rebel XT / EOS 350D Digital Camera

I Have a Casio Exilim Camera. And I Have a Memory Card, and a USB cord. But I Want to use the memory card to upload my pictures. Because when i use the USB cord after i upload them they automatically delete off of my camera. And so i formatted my memory card and i have about 15-20 pictures on there, but everytime i put my memory card in the computer no little box pops up saying anything about the data, as if there was nothing on there, but i know there is because when i tried the card in my gran

Bet your using a 4GB or larger card, and also that your computer is more than a few years old (unlike your grandma's newer machine). If so, the problem is that the card reader on your computer was meant for only standard SD cards (2GB ore less), and ... Casio Exilim EX-V7 Digital Camera

Display reads "images recorded in internal memory" but there are none and I can't take more than 4 pictures until the camera says the memory is full. Also the memory card says it is full after 7 pictures, this is a 16mb card

Hi, the memory card you are using is to small for the camera it has not got enough memory on it you need to get at least a 1gb memory card or 2gb memory this will then allow you to take between 500 and 1000 pictures the 16mb card you have in is not w ... Fuji FinePix A800 Digital Camera

I have a Kodak easyshare LS443 and when I put in a new picture memory card (bought two of them already), after it says 'format memory card' and I do, it just keeps saying 'reading memory card' and nothing else happens.... can you please help me... i have a wedding and want to use my camera!!!!

Hello,Make sure that the memory card you used is compatible w/ your camera. If same issue persists after using the compatible card, camera is unable to detect the memory card. Card compartment is defective. call 1.800.235.6325 for repair. ... Kodak EasyShare C875 Digital Camera

I have an 8gb memory card in my camera. I have a few pictures on there i want to upload onto my computer but when i plug it in it will not find the pictures and say that i didn't take any, but when i take the usb out and look at the camera they are on the camera. why wont it upload onto the computer? ps. only picture that shows up is the one i took before i got my memory card. I deleted that picture so now nothing.

Here is what I wrote today to another user having a very similar problem:You\012 can access your photos without Easyshare through Start / My \012Computer and your card and maybe the camera memory card should appear \012there as E ... Kodak EasyShare M530 Digital Camera

I have a sony cybershot camera. I put my memory card in the pc to upload photos, I had over 400 photos on the card and only 4 of the recent pictures I had taken came up, the rest had an x on them. I took out the memory card and reinserted it but then nothing would come up at all on the pc. So I put the memory card back in my camera and pressed the view button and it started formatting. I quickley turned off the camera but now when I put in the memory card it says formatting error. Do you thi

First do not panic! It is possible to recover your pictures\015\012if you take care. Take the card from the camera (powered off) and if it has a\015\012"write protect" tab then lock it now. Do not try and write anything\015\012to the card or you risk ... Digital Cameras

I have just recieved my camara today. when i turn the camara on it says ''storage error'' and when i try to take a picture it says '' card fuul'' ???? i have re formated the memory card, changed the batterys, and taken the 2gb memory card out but nothing. can u please help me with this???? thanks sarah

Change the primary storage to save the pictures to memory card and not the camera's internal memory. If you can't find the place to change the settings, let me know the brand and model of your camera and I will see if I can give you detailed instruct ... Digital Cameras

When I try to take a picture, it says memory full. But, when I try to look at the memory it says no file. I tried using the disk, installing software, formatting it.. Nothing works. The SD memory card is used, but has no pictures on it. Its driving me insane.

Format the SD card make sure the camera is set to place the new files on the SD card and not go to the internal memory. What I fully expect is the camera has defaulted to using the internal memory which is now full of files/pictures and needs to be s ... Vivitar ViviCam 8025 Digital Camera

Two flash memory cards have pictures on them yet the pc says there is nothing on the cards. i have done a complete uninstall and new install and the problem persists. first time we have ever had an issue with the camera after nearly 10,000 pictures. camera hasn't been dropped. the prongs accepting the flash memory cards are not bent. no new software has been installed recently except bing interface for internet explorer. any suggestions are greatly appreciated. terry

Use a separate card reader. ... Nikon Coolpix 4300 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t

HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

When I turn on my camera to take a picture the display screen is completely black. If I try and take a picture nothing comes out. The whole picture is completely black. The camera is still functioning as if it is taking the picture. The flash continues to work, but unfortunately no picture comes out. But when I switch to the display mode to view my pictures, I can see the old pictures from my memory card. But I just can not take any new pictures. What should I do? What do you think the problem i

Hi there,You can refer to this page as this is helpful for most of the issues related to Digital Camera.Fix th ... Canon Digital Cameras

Just erased all my pictures from my SD 1 Gb memory card but when I put it back in my Canon SD1000 it says 'Memory Card full' - as though it still thinks it's full but it says 'No image' when I try to display any photos!! How can I sort this?

If it says card full then it still is. Sometimes this happens when you pull the card out before it is done ereasing. A camera shop has listings of places that can get your pictures back. You can try opening the card on your computer using a card r ... Digital Cameras

CAPACITY Problem I am using a 2GB Kingston CF card on my S9500, and at 5MP it can store up to 1000 pictures. Recently I had it formatted on a computer and when I inserted it back to my camera, the capacity went down to 590 pictures! i thought it caught a virus or something so I scanned it, then formatted it on the camera. but the display still says I got 590 shots left. so I reformatted it on another PC, and on Properties it says 0 usage so i'm positive there's nothing wrong with the card. Now,

1. Connect your camera to the PC.\015\0122. Download the latest firmware\015\012 http://www.fujifilm.com/products/digital/downloa ... Fuji FinePix S9500 Zoom Digital Camera

Can't get a picture on the screen - just shows black. When we turn the camera on the LCD screen displays the function choices and menu options, but will not display any image. If we take a picture using the view finder and then check for the image, nothing is displayed. We just checked the memory card, and it doesn't even take a photo. All we got was black. Any suggestions?

Check the SD card, they have sliders on them which lets you "lock" the card so nothing can be put on or taken off of it. Make sure that is off. Then go through the menu on the camera and try to format the card again. If the card is bad it should give ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

Memory i took the memory card out the camera to upload the photos onto my computer but now that i put the memory card back in, the camera doesn't display my pictures. It says file error

I think you go to menu, then go to the lat tab and then click format, then yes. idk ? HAHA i thinks thats how it is. ... Samsung L200 Digital Camera

When I turn the camera on, the canon logo appears on the display and the red light in back above the menu button keeps blinking, but nothing happens. When I turn it on in the "taking pictures" mode or "view pictures" mode, it just hangs and acts like it has trouble reading the CF card. I've tried multiple cards and had the same problem, so I think it's the camera and not the cards. Any ideas?

Canon logo is starting of camara indications just as company manuals ... Canon PowerShot S1 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3838 seconds