Having problems with your Polaroid i835 Digital Camera ?

Cannot get new camera to install memory on sd card

\015 It is a sd card from my other digital camera.do i need to purchase a new one\015

Answers :

No, it should work fine with the new one. If it's not working, make sure the card isn't locked. If its still not working, make sure the card isn't full and if that doesn't solve it, I would advise to get a new card.
Repair Help & Product Troubleshooting for Polaroid i835 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t

HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

I have a brand new PNY Optima SD card I wish to use with my easy share camera. When I insert the card into the camera it says the memory card requires formatting, then continues to say formatting will delete everything on the memory card. It repeats and WILL NOT FORMAT. I cannot even get to the MENU to format the card. I am not concerned about getting pictures OFF the card - the issue is that I cannot format the card to use in the camera. Yet my Kodak manual says I can. Why won't the camera form

Hi Mr\015\012\015\012Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com\015\012\015\0122\015\012O ... Kodak EasyShare C875 Digital Camera

When I install a memory card in my camera I get the message read only memory card, remove write protection to capture or write to card. The switch on the memory card is in the correct position, this is a card that I have been using with no problems until now. I also installed a brand new memory card and got the same message. I think there's a problem internally with the camera.

... Kodak EasyShare Z740 Digital Camera

Cannot get new camera to install memory on sd card

No, it should work fine with the new one. If it's not working, make sure the card isn't locked. If its still not working, make sure the card isn't full and if that doesn't solve it, I would advise to get a new card. ... Polaroid i835 Digital Camera

Memory card I love my Gateway DC-T50 but the card fills up too quickly.I have a Kodak SD 256 MB memory card and want to get a bigger one.So I went and got a 2 GB and installed it , the camera screen said This card cannot be used. I took it back to the store and the clerk said it was probably too big because I have an older camera. So I exchanged it for a 1GB and it shows the same error message. My question is; what is the biggest memory card this camera can use? I have misplaced my manual, or I

Try a 512mb because your camera could be older then the 1 and 2gb memory cards can handle...or depending on where you are..you could take it to Best buy and they could tell you...hope it helped =) ... Gateway DC-T50 Digital Camera

Memory card errors. I turn it on and get message MEMORY CARD ERROR PLEASE CHECK CARD. Occurs on different cards. Sometimes I can clean the contacts on the card and it will work. Sometimes, I can take pictures but if I remove the card it cannot be read if install it back or by a computer or printer. I use the camera as publicity in trade shows taking then printing pictures, so the cards are removed and inserted constantly. I have reformatted the card in the camera, still fails.

Hi wait a moment pls your request is been proceeding.. ... Panasonic Lumix DMC-FZ18 Digital Camera

Cannot format new memory card reads: systen file error. I have bought 3 new memory cards for my kodak easyshare 315. each time i insert the new card i get a message that reads system file error. camera has not been dropped or come in contact with water

Go into the menu and find "reset"...follow the on-screen instructions. ... Kodak EasyShare C315 Digital Camera

Brand new Panasonic LumixDMC-TS1. When the camera is turned on, message reads "Memory card error Please check the card". We cannot get past this unless we remove the card and simply use the built in memory. Bad card or problem with the camera?

Have you tried formatting the card - either in the camera, or on a computer? ... Digital Cameras

I just inserted a 8 MB card in and the camera says "Memory card needs formatting" I click continue, then it says "Formatting will delete everything on the memory card", no problem, it's a new card so I click on continue then it says "formatting" then I get the message that says "Memory card cannot be read, insert another card" What's the matter?

8MB or 8GB? If it's actually an 8MB card, you'll be able to put maybe two or three pictures on it, so I'll assume it's an 8GB card.The DX4530 is designed to work with SD cards. Your 8GB card is actually an SDHC card. While SDHC cards will ... Kodak EasyShare DX4530 Digital Camera

My new windows 7 wont except my s1600 fuji finepix camera...i installed the software that come with the camera, i have also unistalled the cam and reinstalled twice just to make sure.....also i get a screen that says there are no new pictures to be downloaded from my camera, and my memory card is full. this is a brand new camera???? help

Dobrý deň.,chcel by som sa spýtať \302\236e aký program si mám nainštalovať k notbooku Samsung R730 a mám foťak FUJIFILM FINEPIX S1600 aby som vedel pozrieť a nahrať si nafoten&e ... FUJIFILM FinePix S1600 Digital Camera

I install a new memory card and get CARD ERROR what is wrong? My original trouble was a bad memory so I bought a new one and this is what I have. The camera is a fiji Fine Pix 4700 zoom

Hi there, please format the new card from computer after that use. If you face the same problem again the go in camera manu option and fromt here reset your camera after that restart the cam. Ihope your problem will be solve then. If not then the cam ... Digital Cameras

I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"

Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras

Card error I have a e-1. Two memory cards with 1 and 2 gb. I get a "card error" message when I insert either into the camera. I brought it to one camera shop. They said that a couple of the pins (that connect the memory card to the brains of the camera) were bent. Recently took it to another repair shop and he inserted a card with less memory and the camera worked. Is it the cards or the camera? Will the camera work (with bent pins or whatever) if I get a new memory card?

1. Ensure batteries are fully charged.\015\0122. Look carefully between the lens and the camera body for any sand, dirt or any damaged etc.\015\0123. Try turning the camera with the lens facing down and shake to dislodge anything stuck ... Olympus E-1 Digital Camera

Memory card My brand new camera, EasyShare C613 refuses to aknowledge that I have installed, and formatted a 256 SD card in my camera. It just says internal memory is full, and no memory card is installed. This worked in my old camera, but why not in the new one? I am restricted to taking 8 pictures.

If the card has not been formatted to remove data, it may have info that is not compatible between your old and new cameras.\015\012\015\012If you have a USB card reader, place the card in it and re-format it.\015\012\015\012I ... Kodak EasyShare C613 Digital Camera

I accidentally dropped my camera with the lens open and it bent so now the camera cannot close, it just shuts off. My memory card is the issue though. I have put it in 2 other cameras, but I still get the Memory Card Locked error. I cannot seem to unlock it (I have flipped the switch on the side over and over and plugging the camera into the computer with the faulty card produces no response). I can't get to my pictures. What do i do?

Try putting just the mem card into the tiny slots on youre hard drive if it has them,thanks ... Canon IXUS 80 IS Digital Camera

My memory card door broke off of me D3100 SLR camera the 2nd day i had it. i ordered a new one. now i don't know how to get the broken piece off and the new one installed. Nikon said to send them the camera. I said forget it.

Hi caroll19421, you can purchase the part contact Mr. Gray in uscamera.com, and for make the replacemet i attach a image scanned.Best regards. ... Nikon Digital Cameras

Have windows 7. I deleted pictures from my computer. Now I cannot reload them from my memory card. Get message "no new pictures found" The pictures are on the memory card and I can see them on my SONYCyber shot camera but they will not load into the comuter.

Power off the cam and on againcheck for virusesadjust the download without deleting ... Sony Cyber-Shot DSC-S500 Digital Camera

Missing pictures I recently went on a trip and took some pictures that disappeared from my camera. Later I started getting the message 'Card cannot be read' so I purchased another memory card. I was taking pictures when I get the message 'Card cannot be read'. I turned it off and back on and the missing pictures were there. I then get the message 'Out of memory'. I turn the camera off and back on and the missing pictures are gone again. WHERE ARE THEY???

Hey flowernthe,\015\012 The error message “card cannot be read" means there was and error when the camera tried to access the memory card. To fix this you should make sure you are using the right kind of memory ... Nikon Coolpix 4600 Digital Camera

Pentax A10 Have a three month Pentax A10 digial camera, with no previous problems. It now cannot read the SD memory card and won't take pics when the memory card is in the camera. This memory card will work in other cameras. Able to take a photo when the memory card is out of camera. Tried a different memory card - same problem. This happened after I took the card in to Walgreens to get some prints made. Can taking the card out of the camera and putting it back in damage the part of the camera t

Try another card in your camera but check the inside the card holder that you have not got a damaged connector in there. and format the card with the camera and not on pc. Hope that help you.jam ... Pentax Optio A10 Digital Camera

I have a new Canon A3300 IS and a new SanDisk SDHC 4 GB memory card. It's worked fine for a few days, and now suddenly, I get a "Memory card error" message, and the camera won't work. I tried reformatting the memory card, but the camera refuses to do it. What happened? I assume I need a new memory card, but I'm afraid that the problem will occur again.

Insert the card into a card reader and format it on the computer. See if that works. Format using FAT32 as its more reliable than the FAT it uses by default. If the camera supports FAT32 you can expect it to last atleast a year before you need to for ... Canon A3300 IS Digital Camera

When I put the memory card in the camera it says 'cannot read' it. How do I format the card? I know it has the right 'size' memory. The memory card I am using is the same one I used a few months ago and I saved the pictures I took to a computer and erased the pictures off the card. Now as soon as I turn the camera on it says 'This card cannot be read'. Im frustrated as there is nothing in the manual that seems to get my camera working again. I have only had it for a year. Please HELP!

Do not use the computer to erase the card. This is the reason your camera no longer recognizes the card. Now you need to format the card in the camera to get it to work properly. ... Digital Cameras

I have a Lumix cameera, Model # DMC-FZ8. I recently installed a new memory card because the one that came with the camera began to malfunction. The new memory card is now having the same problem. The camera tells me "memory card is full" when there are no photos in the camera. I have checked the camera by hooking it up to my computer and it shows no photos in the camera.

Put it in play mode and see if there are pictures on the card (if the card wasnt brand new, of course) If not the card more than likely needs to be formated. In play mode push menu set button go to format when it says delete all data in memory card s ... Panasonic Lumix DMC-FZ8 Digital Camera

Camera does not have a memory card. No pictures exist, but I get MEMORY FULL message as soon as camera is turned on. When I go to the menu and go to MEMORY, the option ALL ERASE shows but I cannot get to it -- pressing the 'go to the right' function on the main menu button does nothing. Connecting the camera to the computer, I see that there are no contents in the folder(s). Have had the camera for 3-4 years, never had a memory card, would hold 4-6 photos in memory of camera before this. Ba

This can be a problem with the memory card, we can try here first something like formatting the memory card via the camera Menu. You also mention that you can access the memory card when connected to the computer you can also format it from there. ... Olympus Stylus 600 Digital Camera

I have a gateway DC-T50 digital camera. I put in a new 2GB SD memory card, formated the card, but when I go to use the camera I get error msg i inserted a new 2GB SD memory card, I formatted it, but when I go to Auto mode I get a message 'this card can not be used'

Is it an SDHC card? SD and SDHC cards fit the same slots, but many cameras won't work with the SDHC (high capacity) cards. SDHC is not backwards compatible. ... Gateway Digital Cameras

Hi, we just bought a new Samsung ES30 still camera with a new 4GB SDHC 4 Silicon Power SD card. We have formatted the SD card in the camera as per the instructions on page 76 of the User Manual which came on the CD with the camera. The issue is that the photos taken do not get stored on this memory card eg the folder is empty when checking the memory card for its content on a PC by connecting the camera to the PC via the supplied USB cable. When the SD card is connected directly to the PC via a

... Samsung ES30 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5417 seconds