Having problems with your Polaroid PhotoMax Fun Flash 640 SE Digital Camera ?

Using other Camera software with a Poloroid 640 Fun Flash

\015 Is it possible to use another software program to download pictures , and work with them,from my old Poloroid 640 Fun flash SE camera the software that came with it is not compatable with Windows XP Stan in Virginia\015

Answers :

I have three different digital cameras. I use the scanner and camera wizard to download my pics.
\015\012The second option, if you use SD card with your camera, then you can get a USB 2.0 SD Memory Card Reader/Writer.
\015\012
Repair Help & Product Troubleshooting for Polaroid PhotoMax Fun Flash 640 SE Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Using other Camera software with a Poloroid 640 Fun Flash


I have three different digital cameras. I use the scanner and camera wizard to download my pics.\015\012The second option, if you use SD card with your camera, then you can get a USB 2.0 SD Memory Card Reader/Writer.\015\012 ... Polaroid PhotoMax Fun Flash 640 SE Digital Camera

Can I use my Fun! Flash 640 digital camera with other software applications?


Yes, you can use your Polaroid Fun! Flash digital camera with many popular image-editing software applications. The Fun! Flash is TWAIN-compliant and comes with its own image acquisition software, which is automatically installed when you install Pho ... Polaroid PhotoMax Fun Flash 640 Digital Camera

I am trying to download my pictures but the software does not recognize the camera or the disk within the camera. I can see (play) the pictures on the camera, hence the disk does not appear faulty. I connect the camera to the computer using a USB lead to download the pictures and click on EOS utility software. The battery is fully charged, the camera flashes saying it is 'busy' but there is no flashing red light to signify the photos are downloading. After a few minutes the camera goes dead (the


Use a card reader to download your pics to a folder you create on your desktop. ... Canon Rebel XT / EOS 350D Digital Camera

Blurry pictures Using a point and shoot digital camera, it was set on night mode by mistake. Pictures turned out blurry. The snapshots were taken inside at night using flash in the camera. Probably because in night mode, camera was setting depth of field wrong. So using flash and set in night mode was the problem. But can anything be done to correct the blurry pictures taken in this situation?? Any software known to correct this problem? Thank's, Angela Sapp


Adobe photoshop might help. ... Casio Exilim EX-S600 Digital Camera

Can I use the Fun! Flash 820 camera with Windows XP?


The Fun! Flash 820 was designed to be used with Windows 95/98 or Me.\015\012\015\012Testing has shown that photo downloading does not work with the Windows XP platform. ... Polaroid PhotoMax Fun Flash 820 Digital Camera

Can I use the Fun! Flash 640 SE camera with Windows XP?


Yes -- with some minor modifications, you should be able use your Fun! Flash 640 SE camera with a computer running Windows XP. ... Polaroid PhotoMax Fun Flash 640 SE Digital Camera

I got a Disney kliq fun digital camera (1.3MP) , model #:M030-201033488 recently for my kid, the CD comes with the camera only has software for Windows 2000, Me or XP which does not work under VISTA that I use(the camera could not be recognized with usb connection), how can I get software & usb driver for the camera under Vista?


... Disney Pix Click Digital Camera

Hi, I got a new ProSpec 4gb flash card and used it last night in my canon 40d. I forgot to format before I initially used it. Shot lots of great images that I could see on the camera back, but now I am getting the messages - can not create a folder, tried to shoot another image and is says cf card is full, and now I can't review on camera, it says there are no images. Tried Digital Photo recovery software and got nothing. Anything at all I can do? I'm tempted to format now and then see if I can


I do not have a solution, but I do have same problem, or a variation of it: filled my ProSpec 2GB, removed it from my Canon G10 to insert a fresh card, then later reinserted the ProSpec to transfer photos to computer. Several tries, and no go. First ... Canon Digital Cameras

PULLED OUT THE FLASH CARD FROM E-620 AND TRIED TO DOWNLOAD INTO MY COMPUTER USING OLYMPUS MASTER 2 SOFTWARE. CARD WAS PLUGED IN DIRECTLY INTO COMPUTER PORT. COULD NOT GET SOFTWARE TO WORK. WHEN I REMOVED THE FLASH CARD AND REINSERTED INTO MY CAMERA, I GET A CARD ERROR. WHAT CAN I DO. DON'T WANT TO LOOSE MY PHOTOS.


... Olympus E-620 Digital Camera with 14-42mm and 40-150mm lenses

Connected Nikon L11 to Vista laptop. Picture Project software NOT installed. Turned on camera in hope Adobe Bridge could be used to transfer photos to laptop. Nothing happened and suddenly something flashed on the camera's screen and now the On/Off button will not work so I cannot turn off the camera. Help. What do I do?


Get a card reader. Use it from now on to transfer your pictures to the computer. Remove the card and battery from the camera...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Nikon Coolpix L11 Digital Camera

I have a Canon EOS 40D camera. We are having problems with using an external flash. The pictures always come out extremely dark with the external flash. The flash seems to work fine, it flashes brightly. The pictures look fine using the built in flash. The flash is a Promaster but we tried a Canon flash and it did the same thing. The camera store we bought the camera and the flash from says it looks like a synchronization issue and that it is a hardware problem with the boot. Their sugges


I don't know if this will help and this post is two months old. The \015\012camera store may be right that the synchronization is the issue which \015\012tends me to point a finger at the external flash. There are at least \015\012three different fla ... Canon EOS 40D Digital Camera

Camera flash i generally use my camera on auto mode so i don't have to play around with buttons! however after loaning my camera to my sister for a week my flash is no longer as great as it was!! I used to take pics and the flash would light 2-3 times giving a great, bright picture. It now flashes once before the pic is snapped giving a dark picture. If i push the flash button on the left side of the scrolling circle it goes from red eye flash (which flashes once) to no flash! I'm almost certain


No worries, I think I can help you with this one.\015\012I believe that if you are using your Samsung Digimax in either "Auto" or "M" mode you will only have the options of "red eye flash" or "no flash". BUT HOWEVER, if you select the "Prog" mo ... Samsung Digimax S600 Digital Camera

My nikon digital camera flash light is not working.When i m using the flash light than my camera not click the pic..and when i m not using the flash light than camera click the pic but the pic quality is becuming good only in day light because in night flash light is not working.my digital camera model no. is coolpix S220 and this is 10 mega pixel.I am staying in chembur mumbai.This is my request that you plz guide me from where i can make it repair.Tell me any good service centre in mumbai . t


Not to worrry, the possible fault is with the failure of your flash unit. This unit is embedded into the camera and is a very arrangement which is not advisable to be opened by anyone less experienced. The best solution is to get the camera serrviced ... Nikon Digital Cameras

I can't get pictures uploaded for my kodak easyshare C813. I don't use an sd card, i just use the internal memory. Recently, i uninstalled the software (for some or another reason) and was just using windows to put the pictures on my computer. I reinstalled the software, and now neither the software nor the computer are reading the camera when i plug it into the usb port. The camera goes dark, but the computer doesn't detect the camera.


When you plug-in the camera into the USB port, what is the message?Do you see any pop-up on the lower right hand side of the screen?Usually the pop-up is "Device is ready to use" or USB device unrecognized if the USB is not recogniz ... Kodak Easyshare C813 Digital Camera

Using 4 2.4ghz cameras with stk1160-001 usb box, on windows xp duel core. easyview software no good, tried using other webcam motion detect software but cant see camera pics on screen, only an off sync pic which does change when holding hand over camera, cant see what the picture is, the device will only work with easyview, why? If i connect a plug from a camera into the video input connector on the unit i can use other softwear, as this signal must be composit video input which then passes the


... Digital Cameras

Flash Heelp , my camera flashes 3 times everytime i use flash , and on other cameras i use , they only flash once , and there is an icon like a symbol of an eye on the camera , am i able to take the icon off ?


Hi - You can download the manual from the link underlined in blue below:Cyber-shot DSC-W50The camera is set to reduce the "r ... Sony Cyber-shot DSC-W50 Digital Camera

I have a Coolpix L100, and have installed the Nikon Transfer software. I am using a USB cable (that came with the camera) to connect my PC (Windows XP) to the camera. The Nikon Transfer software does not seem to work--when the auto launch starts OR when I manually start the Nikon Transfer software--there are no photos to transfer. I would like to use the USB cable to connect and transfer photos from the camera to the PC. Why? you may ask? Because it came with the camera, and frankly this sh


Alright..... I had this same problem and I finally figured it out. If your pictures are saved onto the card, then the USB cord will not detect them. If you want to transfer pics via the USB cable, make sure they are saved to your camera. You can c ... Nikon COOLPIX L100 Digital Camera

Lost pictures I have a Panasonic DMC-TZ3 that I received for Christmas this year. I just bought a new Gateway Laptop to take on a trip. Up till now, the two have functioned just fine together. I use the Lumix software to download my pics each night, then I clear the memory card on my camera, recharge the battery, and I'm good to go for the next day. As a precaution, I also back up my photos to a flash. Here's the issue: we took a three day trip out to Petra, Wadi Rum and Aqaba. While gone, I did


Card Data Recovery is professional photo recovery software to recover deleted, lost, corrupted orformatted photos, videos, and auido files from various me ... Panasonic Lumix DMC-TZ3 Digital Camera

I have a OLyMPUS D-555 Zoom digital camera. I cannot download my pictures onto my computer because I have lost the two software discs that came with the camera. I have the Basic Manual (paper booklet) but without the software I cannot really use this camera as it is supposed to be used. Is there any way I could download this software online?


To learn about the new and free version of Olympus Master 2 software go to: http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp ... Olympus Digital Cameras

I have a Nikon Coolpix P2 camera that I love. I used to have Picasa 2 software loaded and it automatically detected when I attached the camera to a USB port. I've accidently upgraded to Picasa 3, and that software will not detect and start uploading the pictures. Which software should I be using to upload pictures from the camera to my PC? Thanks.


It's probably because Picasa 3 is not your default import program for photos. You can fix this by:In Windows XP, your default import setting must be adjusted on a device by device basis:* Connect the import device (your camera or ca ... Nikon Coolpix P2 Digital Camera

Overexposure I have owned my Fujifilm S5000 for about 2 1/2 years. It has worked perfectly until the last couple of months. I have always used the flash when the camera told me to. Recently, the camera has been overexposing inside pictures when I use the flash. If I don't use the flash, it underexposes the picture. Any suggestions...ideas? I have moved fairly recently and can't find my manual anywhere. Thanks, Laurie


The top of your cam should have a square button with a positive and negative sign. (I have the S5200, so it shouldn't be that different.) Hold that button down while pushing the button for "Macro" (the one with the little flower. On your LCD the n ... Fuji FinePix S5000 Digital Camera

I cannot find how to delete my photos from my canon A720IS once I have downloaded them onto my computer using the Canon Window software that came with the camera. I have had canon cameras before and used the software that would give you the option to clear the camera once you have downloaded. This time - nothing. I have over 300 photos on the camera - help I can't delete one at a time!


The first thing to do is to remove any supplied software that cane with the camera[In this Case Canon]Windows is capable of carrying out operations required.When plugging the camera in - Windows wil ... Digital Cameras

There's a circle around the flash symbol so the flash bulb won't go off when you take a picture, well I haven't used the camera for a while and I've forgotten hou to remove the circle so as to use the camera inside so the flash will flash.?


Hello,\015\012\015\012You have the flash disabled.\015\012\015\012What make and model is the camera. You do not give that information in the post.\015\012\015\012Thanks,\015\012\015\012Wayne ... Digital Cameras

My flash is not working on my Canon PowerShot SX110 is camera. Help! My boss thinks the flash is turned off, but when I go to flash settings it says that red-eye and sync are both turned on. Basically I tried to use the camera outside the other night and the camera kept telling me to raise the flash even though the flash was up. The pictures were all blurry. I LOVE camera and am hoping for a simple solution.


... Canon PowerShot SX110 IS Digital Camera

ACDsee software Hi, Your advice on upgrading Windows doesn't actually help me - i need help installing the camera software! I've just purchased a Pentax Optio S12 as a second camera (my first camera is a Pentax Optio S40). I'm trying to install the ACDsee software that came with the camera. I am familiar with this software as the 1st camera uses it (I already have a version on my computer) When I try to install it, I get an error message saying "Epson Scan cannot be started - do you want to open


Here is the Pentax Optio S12 software:http://www.freedriverload.com/all43095.html ... Aqua Pentax Optio S12 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4822 seconds