Having problems with your RCA CDS4100 Digital Camera ?

Computer will not recognize hardware.

\015 My computer will not find the camera or recognize it. I need software to install or something. What do I do? It is a RCA CDS4100 digital camera [email protected]\015

Answers :

Go to driver guide .com and click basic then type in your driver name
Repair Help & Product Troubleshooting for RCA CDS4100 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I plug in my camera to the computer, instead of getting the two toned alert that indicates that the computer has recognized that new hardware has been attached to the computer, it makes a three tone alert. When I go to "my computer" the camera doesn't show up. But if I turn the camera off, the computer makes the two tone alert indicating that it recognizes that the hardware is uninstalled. What does this mean? I have been able to plug my camera in with no problems for the last four years s


If your goal is to get your pictures, try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a ... Canon PowerShot A75 Digital Camera

I have a Kodak Easy Share M1063 Digital Camera and when I connect the camera to the USB port of my laptop computer, it no longer recognizes the new hardware device and I am unable to upload pictures. I used to be able to do this. I tried plugging the camera in to a home computer and this also did not work. When I plug the camera into these computers a green light goes on on the camera but the device is not recognized and I am unable to upload photos.


This happens cause the camera is seen as installed but the autoplay is set to do nothing ...either uninstall the driver and plug the camera to run it again ...or ...just go to the control panel /add new hardware ( be sure you plug the camera and powe ... Digital Cameras

My name is Chris and my wife just bought a Panasonic DMC-TZ5 digital camera. I was trying to install the hardware to my computer and have the installation disc. Everything is loaded onto my computer, but my computer consistently says that the "USB Device Not Recognized". I went to troubleshoot the problem and it says that "there are no drivers installed" in my USB port. I'm currently using Microsoft XP Professional. I'm running out of options. I'm not sure if my computer is compatible with


I use a memory card reader (about $15) to retrieve photos and toss the software that comes with the camera.\015\012\015\012Another possible solution would be to go to panisonic.com and download the latest software.\015\012\015 ... Digital Cameras

WILL THE REBEL 300D DOWN LOAD VIA IT'S USB CABLE TO MY COMPUTER WITH VISTA AS MY OS? I CAN ONLY USE AN EXTERNAL USB CARD READER TO GET MY PICTURES. CANNON'S SITE DOES NOT OFFER DRIVERS FOR VISTA 32 OR 64 BIT. SOME SITES CLAIM TO UPDATE ALL DRIVERS, BUT FOR A FEE. MY COMPUTER RECOGNIZES THE CAMERA AS NEW HARDWARE BUT EVEN WITH THE DISK WITH TWAIN AND WIA DRIVERS 5.2.1 IT TELLS ME THERE ARE NO DRIVERS ON THE DISK. THANKS, MICHAEL


Please get it at these links :\012www.nodevice.com/driver/.../Canon/Digital_Cameras.html\012\012 ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Was loading pictures from SD card and frame appeared to lock up. It went blank and will not respond even after turning on and off and unplugging for a long period of time. Tried a different card -- nothing -- no response. Called technical support for Smartparts and she had me connect it to my computer -- computer did not recognize any new hardware. Warranty is only 90 days and I've had it six months. Smartparts tech support says there is no repair available. HELP!! Thank you. Barbara


Please try it in another computer.. if it works it detects on another computer then the problem is with ur computers USB . that can be rectified. \015\012\015\012even try these steps which may work for u.\015\012 ... Digital Cameras

Computer will not recognize hardware.


Go to driver guide .com and click basic then type in your driver name ... RCA CDS4100 Digital Camera

I'm having problems in downloading my photos and videos from my camera SamsungL200 to my pc. I tried installing the software that came inside the box, but it didn't work. The computer don't recognize the hardware. What should I do?


My computer can sees my camera but is like it can not open the pictures in my camera. please what do i need to do thanks \015\012\015\012oluk ... Samsung L200 Digital Camera

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c


Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

DP-MCR4 Windows 7 OS - HP Pavilion computer - won't recognize hardware inserted.


... Digital Cameras

I have a sony handycam dcr-TRV70 and I have installed the the installation disk ver.1.5 image mixer and winASPI for win XP. I HAVE winXP,sp3.When i turn on the cam selector switch to VCR,WINxp "FOUND NEW HARDWARE" APPEARS but it doesn't recognize or complete installation since it can not find file:sony dv-vcr then it aborts and error message:can not install".I have the i-link IEEE 1395 CABLE CONNECTED BETWEEN THE CAM AND THE COMPUTER.i recently HAD A COMPUTER CRASH AND RESTORED-IMAGED to THE A


Http://www.tomshardware.com/forum/53160-5-vista-sony-handycam-firewire-problem\012\012\012When you downloaded SON ... Digital Cameras

When i hook my quark probe 99 camera up to the computer it doesnt recognize the hardware


... Digital Cameras

My computer (Vista 32-bit) does not recognize my Canon Eos Xs now. It did last week. I looked it up on Control Panel/System/Devices and I see this message "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." Windows checked for a driver upgrade and reported that what is installed is the latest softw


Sounds like you may have some corruption beginning on your hard disk - try running CHKDSK /F from an administratively-enabled command prompt. It will prompt you to reboot, then it will run a consistency check on the disk and its filesystem upon boot ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Have a Olympus 3000 Zoom camera. When I connect it to my computer by USB, it opens a box asking for the hardware, and that it is not recognized.....any suggestions? I have tried finding the correct software, but have had no luck.. :-(


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Olympus C-3000 Zoom Digital Camera

I have a Olympus 3000 Zoom camera. When I connect it to my computer by USB, it opens a box asking for the hardware, and that it is not recognized.....any suggestions? I have tried finding the correct software, but have had no luck.. :-(


You will need to source the correct software so as to connect the camera to the PC. If it is for transfering photos use the card reader directly to be put into the PC and transferred.\012Try to log on to the official website and post a query ... Olympus C-3000 Zoom Digital Camera

Powershot A630 will no longer download images to Windows Me system. The computer recognizes the hardware, but the ZoomBrowser software does not connect to the camera and it's causing my O/S to get a Msgsrv32 error, after which everything freezes up.


Get a card reader. Use it for downloading from now on instead of your camera. ... Canon PowerShot A630 Digital Camera

I have a new computer and cannot locate my software for my sansung S860-how can I get what I need to view the pictures on my camera... When I plug it in - it does not recognize new hardware


You will have to go to Samsung on-line and download the program and install it on your computer for your camera to work. ... Samsung S860 Digital Camera

Computer will not recognize hardware - Panasonic Lumix DMC-LZ7 Digital Camera


Check your USB connector on your motherboard. ... Panasonic Lumix DMC-LZ7 Digital Camera

I have downloaded my CD to the computer for my Kodak easy share successfully but when I try to transfer my pics from my camera it says it does not recognize the hardware what do I do


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Digital Cameras

The usb port on the camera no longer works. I believe I unplugged it "hot". I've used it regularly for years but ever since unplugging it without ensuring it was properly "stopped" using the computer's "safely remove hardware" function three days ago, the camera is no longer recognized when I plug it in. The usb port still works on other detached items.I've tried to upgrade from the net and to reinstall the camera's usb driver from my install disk and in both instances I get the message it doesn


Hi there,\012Well you done most of the solutions......... anyway problem is most likely in your camera, you can try a last solution before going to repair it, remove the battery from your camera and turn it off for 24 hours (it helps you ... Olympus Camedia C-4000 Zoom Digital Camera

Nikon s6000 driver doesn't want to install. I've tried installing and unistalling the software suite multiple times. I've tried dl'ing the driver directly from the CD via updating the driver throiugh device manager. Nothing I've done so far can get the computer to recognize the camera. Well that's not quite right. When I plug it into the USB port, I get the typical "boing" noise Windows makes when you plug in a plug and play piece of hardware. The USB drive port remains in a harddrive type of ic


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Nikon COOLPIX S6000 Digital Camera

My computer does not recognize my camera after hardware is added. (Nikon Coolpix L11). This camera model is not given as a choice in the wizard.


Having gone over a month without a response to my query, I assume my suggestion to use a card reader solved the problem. ... Nikon Coolpix L11 Digital Camera

Pentax problems... Hey there. I'm having problems with my pentax camera. The camera actually works great, but, I can't sync it up with my computer. The software that came with it is not working with my pc. When I hook up the usb cable to connect the two, it never recognizes the device. I have a dell inspiron that's only about 6 months old. It has windows xp on it. I've never had problems installing a device before. I tried to add the hardware manually, over and over again with no luck. I heard s


Load any software first before installing hardware ... Pentax Optio 60 Digital Camera

Computer all of the sudden won't recognize my camera...


... Kodak EasyShare DX4530 Digital Camera

Camera not recognized by computer. I connected the camera to three different computers, all of which had previously recognized it before, and every one of them did not recognize the device. The Windows computers claimed I needed to reformat the drive, and the Mac just came up with an error message saying that the drive was not recognizable. Do I need to reinstall the driver, or what?


This sound like the cameras software has become corrupt. Try re installing the software for it.\015\012\015\012Hope this helps. ... Samsung S860 Digital Camera

USB Error My computer will not recognize my usb device that came with my camera. I also tried with another usb device from a different camera (same model) and it still did not work. My camera has the message USB error and my computer generates the message: 'USB device not recognized. One of the USB devices has malfunctioned and Windows does not recognize it'. I received the same message with both USB cables. I thought that I may need to install the drivers for my camera, but my computer does no


Are you turning the camera on after you plug it in to your computer? You should do that with all your USB devices. Let me know if that helps. Feel free to rate my answer.\015\012\015\012Rob ... Polaroid i735 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3626 seconds