Having problems with your Ricoh Caplio GX Digital Camera ?

I have taken some new photos on my camera but when I have connected it up to the pc to transfer the photos it keeps saying no new picutures or video were found on this device

\015 I have taken some new photos which I want to transfer to the pc but a box keeps coming up saying connecting but over the top another box appears which says no new pictures or videos found on this device. There is only an okay button and close x on the box and this closes both boxes down. I can see the new photos on the camera yet it wont allow me to transfer them or all of the old and new photos again.\015

Answers :

TRANSFERRING PHOTOS TO COMPUTER
If your photos are stored on the memory card, then removethe memory card from the camera and insert it into an USB memory card reader.Connect this USB memory card reader and memory card into the USB port of yourworking computer. Your computer will see this as an USB Mass Storage Device oran external storage device; you can then open the folder on the memory card andcopy the photos to your computer.Memory card reader is a handy device and is inexpensive. Youcan copy photos from other cameras and you can also download photos off yourmemory card to someone else's computer without the need of installing anyprograms.
Repair Help & Product Troubleshooting for Ricoh Caplio GX Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have taken some new photos on my camera but when I have connected it up to the pc to transfer the photos it keeps saying no new picutures or video were found on this device


TRANSFERRING PHOTOS TO COMPUTERIf your photos are stored on the memory card, then removethe memory card from the camera and insert it into an USB memory card reader.Connect this USB memory card reader and memory card into the USB port of yourwork ... Ricoh Caplio GX Digital Camera

Hi, I'm trying to upload my photos from my camera onto my pc and I keep receiving a message saying: "No new picture or video were found on this device". Although I can still see my taken photos on the camera. Can someone please tell me what am I doing wrong? I've previously uploaded photos successfully with the same camera and laptop. Many thanks in advance for your kind assistance


Hi there remove the memory card then turn on the camera & check the camera memory. I think all the photo save in camera memory. Let me know. ... Samsung L100 Digital Camera

Importing pictures i've had a samsung nv3 camera for about 5 years and have never had any problems raking pictures and then uploading them onto my laptop. Recently i went on holiday and used a 2nd memory card (which i have used previously and uploaded pictures fine onto the laptop). This time when i connect the camera to the laptop i get a message saying 'no new pictures or videos were found on this device'. However i know there are pictures on the memory card as i can view them on t


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Samsung NV3 Digital Camera

My new Insignia Digital Photo Keychain won't load. I bought 2 of them, and both of them when I connect them they say ''connecting'' on the blue screen, but they never come up on my computer. My device driver says there is an error and it cannot upload the device driver. I don't know what to do to bring up this software if my computer won't recognize it when I connect it.


... Digital Cameras

Ive got a hitachi dzhv-584e pocket video camera, but the software disk says that 'no availible device is found, please connect a device' even thou it is plugged in


... Digital Cameras

Hi ! I tried uploading some pictures to my pc but the computer says "no new pictures or videos were found on this device".Even when i accessed the device through "my computer" it was empty when in fact there are about 300 pics stored on my camera (canon powershot SD900) what should i do? The first time i used a USB cable and the second time i inserted the card into the computer but that dint work either . help !


U try reprogram ur gadget, ... Canon PowerShot SD1000 Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!


Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras

My Youcam says Cannot connect to this Video device(USB Camera). Please select another capture device via Setting or close any application that may be using this video device and restart YouCam please help me out .. i dont know what to do


I've got the same problem...i'm using build in usb camera on HP compaq labtop and the operating system is windows vista..please guys any help?? ... Digital Cameras

Digital Trail Camera Model#119223C. Trying to view photos on my PC per instructions on page 12 of Manual. Have H-P Compaq Presario PC with Windows XP Home Edtion. PC recpgnizes that New Hardware Device is found but cannot locate any driver/s for the device. Camera did not come with a CD with software to install. PC does NOT display a new disk symbol under "My Computer". Where can I download necessary software/driver? Thanx!


Hi,\015\012\015\012The drivers required to connect digital cameras through the USB port are included in the Windows XP operating system. So, no drivers are necessary to download or view the images on the PC.\015\012\015\012Als ... Digital Cameras

Hi i have a nikon coolpix L11 dg cam.. when i connect the camera to the comp.. i get a msg new hardware found... but later during the installation it says, drivers not found... and also i have downloaded the picture project cd completely on the system.. on picture project when i click transfer.. it shows not connected.. pls help me.. i have so many pics to transfer.


If you are using Windows 7 then that itself the problem. There is a work around though. You can remove the card from the camera and plug it into the card reader slot on your laptop so that you can just copy the pics like you do from a USB drive. Atle ... Nikon Coolpix L11 Digital Camera

My usb cable won't allow me to install my camera . I put the usb cable into the computer. It comes up with saying found a new hardware but an unknown device. Windows found the drive but your device encountered an error while attempting to download it. help.


It may or may not work, but try installing as Administrator and setting the program's EXE into "Compatability Mode for XP SP2",and also, running as Administrator. Windows 7 just doesn't want to support any hardware over like a year old... Drivers ar ... Vivitar ViviCam 8025 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


When it's plugged in, are you remembering to press the little (M) button to switch it to PC mode? If so, you might need to install the camera device. Go into your Control Panel and follow the steps under the Scanners and Cameras tab.\015\012 ... JVC GC-A33 Digital Camera

I have tried everything to download pictures in vain. The photos can be seen on the camera, but when i connect the cable or use the card in my computer, it says no photos found! I have downloaded photos off it before!


You can either uninstall and reinstall the camera software on your pc or switch to using an external memory card reader instead.The latter is faster, more reliable, and doesn't rely on using camera manufacturer's proprietary and often clu ... Canon PowerShot A570 IS Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


1. Remove the software- Windows does not need it. 2. Check the batteries are fresh in the camera. 3. Try another lead.4. if the Memory card is removable- try it in a card reader.---------------------------------------- ... Praktica DCZ3.2S Digital Camera

I have a Photosmart R725 camera with some problems reading the card. Message on screen says "card unreadable" or "card unsupported". This occurs with a new card, and even with a card that I have been using already, and have hundreds of photos on. I have tried to find the answer to my problem in the book, to no avail. Please help. Card unreadable on screen, also unable to establish a connection with pc. This also occurs with a new card


You can contact HP through their online chat page. I have contacted them several times in regard to my HP camera and they are extremely helpful. You should still be able to contact them through this service even if your warranty has run out. Here is ... HP Photosmart R727 Digital Camera

I can't get photos to upload from my Canon S500. Always in the past I just made the USB connection and I got a dialog screen telling me what to do. Now I have a new computer (running Vista, just got my Windows 7 upgrade and haven't loaded it yet), and it gave me a short message about "driver installed and then nothing--no icon, no nothing. It does make a sound when I connect and disconnect the camera. I went to the Canon site and they say there's no special software to download for this.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot S500 IXUS 500 Digital Camera

I have a C-3030ZOOM. Had a HD failure and re-instaled CM 2.01 and updated to V2.3 that is running MS OS XP Pro. The computer is unable to recognize camera. When I connect the camer to PC via USB - I do not hear the "Bong" sound when new device is added. Going to Contol Panel to add devise, it says that drivers for device not installed (Code 28). Hardware update wizard cannot locate drivers. Loaded W2000 drivers. Rebooted PC. Started Olympus Master V2.3 and went to file to upload images from c


Presumably you downloaded this, extracted files and right clicked inf file and clicked install?\012Did you then reboot and try to connect the camera? Connect then switch camera on? ... Olympus Camedia C-3030 Zoom Digital Camera

I have an canon powershot A490. I have two leads to connect it to the computer so i can upload photos. i have tried both cables, but nothing on the computer pops up such as 'device found', nor is it in the devices in my computer. how can i solve this problem?


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot A490 Digital Camera

On the display it say card locked i got a new car and say the same , i can't not take any photos or record video thanks .


For the 'card locked' problem, first check yourSD card.There is a switch on the side of the card. When theswitch is on unlock position, you can format, take pictures or delete pictures.But if the switch is in the lock position, you can not do the ab ... Canon PowerShot SX120 IS Digital Camera

I have a new cord and still cannot transfer pics from camera to computer. The window opens that says the camera is connected and says select program to launch for this program but this is blank and I cannot upload photos


The easiest way to transfer images and videos from your camera is to use a card reader, which is very cheap and hasslefree. You take out the memory card from your camera and put it in the card reader, and it will work just like a USB flash memory. ... Kodak EasyShare One Digital Camera

"check connections" I just got a Casio Ex-Z77 and am trying to upload my photos for the first time to my PC. I've followed the instruction manual and tried all the tips I've found online (making sure my battery is charged, checking USB ports - all the obvious stuff), but nothing works. As soon as I plug in the USB cord, the screen goes blank. After a couple minutes the screen says "check connections". The ONLY response I'm getting from my camera when it's plugged in is, when the volume on my PC


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Casio Exilim EX-Z77 Digital Camera

When i attact camera to computer to download photos nothing happens, no external device is found at all -canon ixus 500 with new battery and charger. i have a toshiba p200 laptop which has been able to download photos before this.


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Canon PowerShot S500 IXUS 500 Digital Camera

I have a new computer and trying to connect camera to import photos. Sometimes I get the answer USB not recognized. Other times it will recognize the device, however will not let me import the photos. Thanks


Use a card reader instead of your camera. ... Canon PowerShot S2 IS Digital Camera

I have a Kodak Easy Share M1063 Digital Camera and when I connect the camera to the USB port of my laptop computer, it no longer recognizes the new hardware device and I am unable to upload pictures. I used to be able to do this. I tried plugging the camera in to a home computer and this also did not work. When I plug the camera into these computers a green light goes on on the camera but the device is not recognized and I am unable to upload photos.


This happens cause the camera is seen as installed but the autoplay is set to do nothing ...either uninstall the driver and plug the camera to run it again ...or ...just go to the control panel /add new hardware ( be sure you plug the camera and powe ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4179 seconds