Having problems with your Ricoh Caplio R4 Digital Camera ?
When switched on, display reads "In synchronized monitor mode"
\015 And I can't find how to return to viewfinder display.\015
Cycled through display options, still couldn't get viewfinder image. Checked images already on card, and they showed OK, so screen operating properly. Went back to viewfinder mode, got lots of horizontal lines across screen. Realised I could do no more, so took camera to shop it was bought from, who checked it and said it had an electronic problem that needed professional repair facility, so camera has gone for an estimate of repair cost.
Repair Help & Product Troubleshooting for Ricoh Caplio R4 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
When switched on, display reads "In synchronized monitor mode"
Cycled through display options, still couldn't get viewfinder image. Checked images already on card, and they showed OK, so screen operating properly. Went back to viewfinder mode, got lots of horizontal lines across screen. Realised I c ... Ricoh Caplio R4 Digital Camera
Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec
Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras
After deleting all files on the memory card, the screen will not change back when using the mode switch. The screen displays "no images" on both the view finder mode and monitor display mode. I've replaced the batteries and changed the memory card, but this did not resolve the problem.
The camera it is in the view mode and cause you deleted all the images on the camera during the transfer this is the reason ...first insert the camera..put it in the shooting mode...and not into the view picture...and in the menu ..look for sto ... Konica Minolta DiMAGE Z5 Digital Camera
Hi K akima...have followed your advice, but no luck. When I go to continuous mode, it only lets me shoot a single shot, the display briefly reads r 08 then returns to r 09 again. I've tried my other lenses ( Sigma and Nikno ) and they autofocus okay and still show the r09 in the display, but again it won't allow me continuous shots, just the one. The Sigma 120-300 doesn't have an autofocus switch, and i've thoroughly cleaned the contacts. Yes it works manually but I need auto for sports pics. Un
I get r11 but I have a blank memory card which I have just formatted. Sometimes I can take a picture - sometimes I can't. Only bought the camera a fe days ago so wonder if I have set something incorrectly in the menu. ... Nikon D80 Digital Camera with 18-135mm Lens
The display on my Ixus 500 has gone blank. It started to show weird colours when switched on but turning it off then on returned the display to normal. I knocked the camera the other day and the display is now blank both in camera mode and picture review mode. The camera makes the usual noises when selecting Menu etc. It also save picture to the memory card. Is it worth taking it to bits to look for a loose connection?
This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot SD100 / IXUS II Digital Camera
LCD screen turns purple in shooting mode. Photos can be taken. Most are Ok, some slightly out of focus or faded coloration. If switched to play back mode and then back top shooting mode, display is Ok for a short time then degrades from top center in a V shape to a purple line display.
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot S410 / IXUS 430 Digital Camera
No image on LCD screen, only irregular lines of varied coloring. When picture is snapped, it is of these lines--no image. Help. Details: I turned the camera to shooting mode but it does not display the image of what I want to shoot, but just a series of horizontal lines. If I take the shot, it shows the lines which were displayed on the LCD screen. If switched to playback mode, previously shot images show up fine. I checked the batteries; they were fine. I replaced them anyway, to no avai
I have the same problem and after doing research, I found this website. ... Canon PowerShot S1 IS Digital Camera
Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.
Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera
The LCD screen only switches ON in C(Custom) Mode and tansfers to Viewfinder in other Modes.In display Images mode it regains to the LCD screen but as soon as the click button is pressed it again switches over to the Viewfinder I have tried with the Power Saving options and the Custom Settings with no fruuitful result. Please kindly help me in sorting out this problem
Try pushing the disp. or display button. I hope this helps! Please rate my answer. ... Canon PowerShot A570 IS Digital Camera
The Monitor on my Nikon D80 does not show any image when I try to take a picture - The viewfinder is ok and the camera takes a picture ok and displays it for about 4 seconds on the monitor after taking it. I can view the Menu's and can View existing pictures ok via the monitor. Is there a way to switch the monitor off or on, tried the menus but cant see anything obvious.
You can switch it off so as not to show the picture after you take one.You cannot use the monitor to show images as you're taking them. The D80 does not have a Live View capability. ... Nikon Digital Cameras
Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?
Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera
LCD monitor The LCD monitor is blank when turn camera on. I can view historical pictures but when switch mode to take picture, the LCD monitor is blank and if take picture, the picture is blank.
This sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\012\01 ... Canon PowerShot S230 / IXUS 179 Digital Camera
Blank screen My Olympus FE-170 display screen is white, rather than showing whatever the lens is pointed at (regardless what mode the camera is in). Oddly, icons display just fine and stored pictures can be viewed clearly on the display. This problem occurred without warning (it was not dropped or damaged) and the camera is just one year old. Have you ever encountered this? I?ve read the entire manual and can?t find anything on the problem.
This sounds like CCD sensor is faulty and should be replaced . Camera works fine in playback mode generally with this problem but not in capture mode ( camera has gone 'blind'). Should be repaired free of charge if the camera is as old as you say. ... Olympus FE-170 Digital Camera
Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!
You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera
LCD screen black, no viewed image displayed.
Hold down the display button for a few seconds...It worked on my Caplio R7 which was doing this all weekend...hope this helps ... Ricoh Caplio R30 Digital Camera
A85 Dead During a normal session, switching from picture-taking mode to view mode, the lens would not retract and the picture in the view froze with the current image. I could not turn off the camera. After a while, the batteries got very hot, so I removed them. I took out the CF card. Later, I replaced the batteries and the put the card back in. The camera worked very briefly, but the LCD view would not work, displaying flashing lines on a black background. New batteries didn't help. The camera
I read something about the fuse going out...http://www.dcresource.com/forums/archive/index.php/t-18151.html ... Canon PowerShot A85 Digital Camera
Date/Time stamp shows on pics fine but when I connect to pc with usb they all default to 1/1/2000. When I connect the usb cable into my camera the screen display reads "setup date/time usb connected" but at this point the setup buttons are frozen in both set up mode and playback mode. I want the pictures to transfer to the pc with the valid date that they were transferred on. Each time that I clear the internal memory or the memory card the camera starts naming the new pics with the same name as
... Moultrie GameSpy 4.0 Digital Camera Deluxe
Nikon d70 There is no display on the monitor screen. When I press menu the screen turns white. No menu items and no photos are displayed. I aso note that the date has gone wrong - gives 2004-date for photos taken today when I read memory card on my laptop.
... Nikon D70 Digital Camera
I just bought a d60 and the monitor does not display anything other than a blank screen or the shooting info--never the monitor view. what switch am have I clcked or missed?
I assume it will also display the menu when you press the menu button?The D60 does not have a Live View capability. You have to use the viewfinder just as SLR uses have been doing for half a century. ... Nikon D60 Digital Camera
Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t
My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera
Lens Problem I just bought an Olympus C-8080. While switching the camera on there are some 4 to 5 light pixels on the display (lcd monitor on the back of the camera), even when directing the camera into the dark. It is not really a problem now, but do you also have this problem with your LCD monitor? What if they become more?
Dead pixels are a nightmare of every LCD screen. There is no way to avoid them - you can just hope they never happen to you. There is no pattern to how they appear and when, but the ones you have will stay for ever. If they bother you right now, send ... Olympus Camedia C-8080 Wide Zoom Digital Camera
EX-Z40 camera is not responding to commands except ON, PLAY, ZOOM and RECORD. There is a strange but permanent pattern on monitor screen when camera is switched off which brightens when camera is switched on. MENU, DISPLAY etc have no effect. Zoom and flash function as does charger.
Did you change sd's ? Make sure they are Sandisc, Toshiba or Panasonic. ... Digital Cameras
About seven days ago bought shelf display Fujifilm S1000. Worked fine at the store. Got home, read instructions, powered up, lens would not extend, "zoom error" displayed. Camera was room temp. When switched on, camera beeps, extend motor clicks, sounds like a gear engages for a split second. Took back to store next evening, it worked fine. Next try at home, same problem. Back to store, worked fine. Tried at home and at work, still "zoom error". Again to store, worked fine. Ready to return, stil
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S1000FD Digital Camera
The lcd monitor does not display,I have pressing the disp buttton,but with no change,the only display i get is in the stich assit mode, this is a canon powershot a85
First you do is turn off the unit take the battery, for about 1minutes turn again and reset the factory setting,and do some adjustment and operate the camera again. ... Canon Digital Cameras
When I turn the camera on, the canon logo appears on the display and the red light in back above the menu button keeps blinking, but nothing happens. When I turn it on in the "taking pictures" mode or "view pictures" mode, it just hangs and acts like it has trouble reading the CF card. I've tried multiple cards and had the same problem, so I think it's the camera and not the cards. Any ideas?
Canon logo is starting of camara indications just as company manuals ... Canon PowerShot S1 IS Digital Camera