Having problems with your Rokinon DC59 Digital Camera ?
What size of memory card and brand should I get for my new Rokinon E-Touch DZ1000
This camera has SDHC card expandable. With a minimum capacity of 4GB. So that means you can buy 4GB, 8GB ... whatever you budget.
Repair Help & Product Troubleshooting for Rokinon DC59 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
What size of memory card and brand should I get for my new Rokinon E-Touch DZ1000
This camera has SDHC card expandable. With a minimum capacity of 4GB. So that means you can buy 4GB, 8GB ... whatever you budget. ... Rokinon DC59 Digital Camera
I have a brand new PNY Optima SD card I wish to use with my easy share camera. When I insert the card into the camera it says the memory card requires formatting, then continues to say formatting will delete everything on the memory card. It repeats and WILL NOT FORMAT. I cannot even get to the MENU to format the card. I am not concerned about getting pictures OFF the card - the issue is that I cannot format the card to use in the camera. Yet my Kodak manual says I can. Why won't the camera form
Hi Mr\015\012\015\012Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com\015\012\015\0122\015\012O ... Kodak EasyShare C875 Digital Camera
When I turn on my camera I get a Memory Card Full Error. I know that the memory card is not full. I have even put a brand new memory card in the camera with no pictures on it and I still get the same message.
Hi,\015\012\015\012I do not know whether your camera has an internal memory or not. A model would have helped and i could have given detail instructions. In its absence kindly do the following:\015\012\015\012Power on the camera and go in ... Digital Cameras
When I install a memory card in my camera I get the message read only memory card, remove write protection to capture or write to card. The switch on the memory card is in the correct position, this is a card that I have been using with no problems until now. I also installed a brand new memory card and got the same message. I think there's a problem internally with the camera.
... Kodak EasyShare Z740 Digital Camera
Olympus cr 350. New camera. After number of photos taken when turning on the camera it says to either turn of or format the memory card. At the store I got a new camera, but still have the same problem. I can take some photos, then I get the same message. At the store service desk they tell me that the camera could be incompatible with the brand of the memory cards Transcend, at the department inside the store they say it is not probable.
May be your memory card was error/damaged, format it and check for error. ... Digital Cameras
Samsung s630 Wel It wont work with the memory card but with out it, it does they're 2 brand new and should word together. San disk sd card 2gb. When I put it in the camera turns on ok gets the lens out and then nothing happens the screan stays dark and no butons works. To get it working again I get the card out and the it works but not enough 9 pictures I want to be able to take more. What should I do ? please answer quick I'd like to used it soon ! Thank's Chela
About the memory cards to be used with this camera, those could be: - MMC / SD card (Up to 2GB Guaranteed)- SDHC card (Up to 4GB Guaranteed)\015\012Some cards are not compatible according to the memory cardmanufacturer a ... Samsung Digimax S630 Digital Camera
My Kodak C913 camera keeps telling me that the memory card is protected and to reset switch on memory card. This happens with a brand new 1 GB card, or on the 4 GB cards I have. (I have tried different cards and its always the same message that pops up) No matter how many times I reset the lock, I still get the message. I love the camera but have only had it a few months and its driving me crazy.
The switch should be in the unlocked position...is that where you have it? ... Kodak EasyShare C913 Digital Camera
Brand new Panasonic LumixDMC-TS1. When the camera is turned on, message reads "Memory card error Please check the card". We cannot get past this unless we remove the card and simply use the built in memory. Bad card or problem with the camera?
Have you tried formatting the card - either in the camera, or on a computer? ... Digital Cameras
Canon ixy 700 works fine with SD memory card 512KB. Purchased a new 16GB card but when I get a "Memory Card Error". I figure it's a firmware issue that isn't handling cards of this size. I have been on the website http://web.canon.jp/imaging/ixus700/frm-e.html#serial but it says my canon is currently running at the latest firmware (not sure what that is or how to find out). Happy to pay for a fix but I don't want to pay much for an answer which says 'you're stuffed, this can't be
HelloOK unfortunately your camera only supports a memory card up to 2GB. Fortunately there is a firmware update which might resolve the problem, however, this is not legit firmware supplied by Canon, hence, the full effect of the upgrade ... Canon PowerShot SD500 / IXUS 700 Digital Camera
Samsung SL502 camera. The camera is under the impression that the memory card is locked, when in fact it is not. I have tried formatting the card, i have tried brand new never been used cards and get same result. "memory card locked"
Are you sure the slide switch on the side of the card is in the unlocked position? ... Samsung SL502 Digital Camera
I keep getting a memory card error for my Canon Powershot SX20. I tried a 4 and an 8 GB card and keep getting error message. Also made sure the lock was off. Any ideas? It's a brand new camera. Thanks.
Have you tried wiping your memory cards completely? The formatting may have gotten messed up somehow so the camera can't recognize them. I would also check the contacts on both the camera and the cards to make sure they are free of dust. It could als ... Canon PowerShot SX20 IS Digital Camera
Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t
HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera
I have a Kodak EasyShare z710 that will not format a memory card. I started with an older one i had and figured that it was the card. So i recently bought a brand new 2GB SD card for it. It tells me that it needs to be formated and i follow the steps, but then it just goes back to the previous screen. I dont have a card reader on my computer, but do have the cables and connect it to my computer that way. Is there a way to get the camera itself to go ahead and format it? Or a way to do it fro
The card must be formatted in the camera. ... Kodak EasyShare Z710 Digital Camera
I bought a brand new sanyo e1292 camera and cant not get arround the error message of formatting the card, try different cards and size and still the same message. "Card requires formatting" this is a lie since my other digital cameras reads all the SD cards I tried with this camera. Any solutions? I think this is a firmware issue.
Are you saying that you have not tried formatting the card in the camera even though the camera wants you to? ... Digital Cameras
I have A vivitar vivicam 8025digital camera with touch screen. When I install memory card and try to take picture, it says my card is full. It is A brand new card and has never been used. What am I doing wrong?
1. With no card in camera, go into menu and find "reset"...follow the instructions.\0122. With no card in camera, go into menu and find "format"...follow instructions to erase internal memory.\0123. Insert card and do the "format" thing again. ... Digital Cameras
I bought a brand new sanyo e1292 camera and cant not get arround the error message of formatting the card, try different cards and size and still the same message. ''Card requires formatting''
Well, have you tried formatting the card in the camera? This will erase it so download any pictures first using a card reader if necessary. ... Digital Cameras
My new windows 7 wont except my s1600 fuji finepix camera...i installed the software that come with the camera, i have also unistalled the cam and reinstalled twice just to make sure.....also i get a screen that says there are no new pictures to be downloaded from my camera, and my memory card is full. this is a brand new camera???? help
Dobrý deň.,chcel by som sa spýtať \302\236e aký program si mám nainštalovať k notbooku Samsung R730 a mám foťak FUJIFILM FINEPIX S1600 aby som vedel pozrieť a nahrať si nafoten&e ... FUJIFILM FinePix S1600 Digital Camera
Memory card I have a sandisk memeory card I use that is 1gb ultra and i can put that in my computer and it pulls it up right away. But when I use a 4gb or 8gb I can take the pictures but my computer will not pull pictures up or recognize the disk. Is there only certain sizes I should use in my 1285 camera? Once I saw my camera say does not recognize that format? All the san disks I have are brand new as well.
I have looked at the specs for your camera and you should be ok, if you are using SD or SDHC memory cards. As far as the computer you are using to read the cards, not enough info. to comment on that. One possible way to see your pictures on the 4gb ... Kodak EASYSHARE Z1285 Digital Camera
My JAZZ X4 is not working. I put in the right memory card and brand new batteries and it powers on. The word JAZZ comes across the screen, then nothing. It doesnt go away and i cant do anything. Pressed and held down all the buttons and cant get it to do anything but say JAZZ. Wont even power off withoit me taking the batteries out. Cant find jazz support number. Dont know what to do next. How to i get it to work
... Digital Cameras
Get error message CHA where number of exposures should be. Have inserted (and formatted) two new Sandisk Extreme III memory cards with same result. Camera is brand new and I have yet to take a picture with it.
1. Check to see that none of the pins in the card compartment of the camera are bent.\0122. Format the card in the computer. Choose FAT..not FAT32\0123. Format the card in the camera.\012This has worked for many users. ... Nikon D700 Digital Camera
Brand new samsung g600 getting message, preveiw error when trying to turn camera on, have tried soft reset and changing the default memory to the memory card but it has made no difference
If it is Brand new then i would suggest calling Samsung. sounds like it is having ROM issue. not something easily fixed on your own. ... Digital Cameras
Brand new outa the box; memory card reading error, cannot take image. memory card also brand new bought today. I put in a memory card from my friends camera; SX20is works? dumbfounded
... Canon PowerShot SX20 IS Digital Camera
I have an Olympus C-740 Ultra Zoom Digital Camera. I bought a new memory Card. This camera is new to me and this is the first memory card I have purchased. I do not have a manual for the camera. I am having a problem getting the camera to read the card. I insert the card, turn on camera & the window says "no picture". I changed the batteries also. I can get a oval ring which says "Info on the left, picture of cards at the top, "Mode Menu" on right, & bars at the bottom.It appears the "Mode Menu"
Choose YES for the Format option. Allow it to finish. Should work fine then.\015\012Possible defective card if does not work after full format. Do not use any "quick format" option.\015\012First time must be FULL format. ... Digital Cameras
I have a new Canon A3300 IS and a new SanDisk SDHC 4 GB memory card. It's worked fine for a few days, and now suddenly, I get a "Memory card error" message, and the camera won't work. I tried reformatting the memory card, but the camera refuses to do it. What happened? I assume I need a new memory card, but I'm afraid that the problem will occur again.
Insert the card into a card reader and format it on the computer. See if that works. Format using FAT32 as its more reliable than the FAT it uses by default. If the camera supports FAT32 you can expect it to last atleast a year before you need to for ... Canon A3300 IS Digital Camera
Card error I have a e-1. Two memory cards with 1 and 2 gb. I get a "card error" message when I insert either into the camera. I brought it to one camera shop. They said that a couple of the pins (that connect the memory card to the brains of the camera) were bent. Recently took it to another repair shop and he inserted a card with less memory and the camera worked. Is it the cards or the camera? Will the camera work (with bent pins or whatever) if I get a new memory card?
1. Ensure batteries are fully charged.\015\0122. Look carefully between the lens and the camera body for any sand, dirt or any damaged etc.\015\0123. Try turning the camera with the lens facing down and shake to dislodge anything stuck ... Olympus E-1 Digital Camera