Having problems with your Samsung Digimax L730 Digital Camera ?

Processing for 7-10 seconds

\015 Sometimes after i take some pictures, my digital cam needs 7 to 10 seconds processing to save the pictures....i have no idea why!!!!is that a processor issue?\015

Answers :

Yes this is generally a processor issue....you can still try using a diff memory card...sometimes that may help
Repair Help & Product Troubleshooting for Samsung Digimax L730 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Processing for 7-10 seconds

Yes this is generally a processor issue....you can still try using a diff memory card...sometimes that may help ... Samsung Digimax L730 Digital Camera

When i take pictures rapidly the screen says ''processing'' , often for up to10 seconds or more. this happens with a 2 gig non hi def card and 8 gigHD card. regardless of pixel setting.this has just started happening. what could it be?

It could be caused by your SD card needing to be formatted.\015\012\015\012Format your SD card. NOTE this will delete all existing data on your SD card.\015\012Do the following: \015\012\015\012\015\012\015\012 ... Kodak EASYSHARE Z1285 Digital Camera

Set up I cannot finish installation of the software because I get an error message that states an error code 1618x17x2951053040x. First, how can I complete the installation process and second, can I charge the battery in the camera using the USB port without completing the installation? I ask this because when I plug the charger into the port, no "ready/battery charging light" is on.Please help. Thank you.

The error that you have mentioned is related to a memory location so you might have a problem with the memory of the PC however I would try and boot the PC in directory service restore mode which is a protected mode in windows and try to install the ... Kodak Easyshare M753 Slim Digital Camera

Within the last few days, suddenly when I take a picture a picture there is a little red eye that is flashing on the left hand of the screen and the little green light at the top is flashing also and there is hesitation of about 15 seconds before a picture is taken and then the picture will have a redish tint to it when it processes. This just started and I have changed batteries out and powered the camera on and off several times and I have checked all of the settings, and still cannot figure

It sounds to me that the timer is on. That would certainly explain the blinking lights and the 15 second delay. There should be a button with what looks like a small clock on it to turn this feature on and off. You should also be able to find it i ... Digital Cameras

Why every time I take a picute on my pentax p70 appears on the screen: data being processed and tkaes about 5 to 10 seconds to get ready to the next one? What shall I do to stop it?

The camera does some digital noise reduction, to reduce the 'grain' effect when light is low. To avoid the delay (and seeing that message) take photos with more light - e.g. turn on the flash. This is a known annoyance with this camera - it would hav ... Pentax Optio P70 Digital Camera

The camera is 8.1 Mega Pixels, Model # DSC-N1. The problem: the pictures that come out are reddish and the snapshot is delayed by a few seconds whereby the camera displays "capturing" and then "processing" messages. Please help with 'how to fix' this problem. My initial thought is that it might be a wrong setting. Thank.

It sounds like you may have changed the white balance setting. The other problem could be that your memory card is getting full or needs to be reformatted. ... Sony Digital Cameras

I have a fujifilm f50se and it is the second time I download the pictures from the camera to PC with Vista and have a i/o error and process aborted and can't download anymore pictures to PC

Try first to connect the camera on a different USB port of your computer and check if the camera will still be detected but if its not detected anymore , you can use a different USB cable or a best alternative way is to use a card reader so you can t ... Digital Cameras

I turn the camera on to use it and it comes on but after a few seconds comes up with ' lens processed to stop wait to power off' and turns off so i cant use it. what do i do? camera type is g-

... Goodmans G-Shot 5030Z Digital Camera

Every time I take a pic with my Kodak EasyShare M1093 IS it takes several seconds of processing before it will let me take another pic.

This is normal for a compact point&shoot camera. One (of the many) advantages of higher-end (bulkier, heavier, more expensive, more complex) dSLR cameras is the higher speed, allowing the user to take many photos per second. ... Kodak EasyShare M1093 IS Digital Camera

When power is turned on the zoom lense moves in and out on its own for a couple of seconds then stops. Camera remains on (battery is charged) The message changes from "access" to "turn the power off and on again." When that is done the same process happens again. Photos can be retrieved that are in the memory to view but the problem is getting to the starting screen in order to take a picture. What's up with that? Hope you can help!

This could be dust or lint or sand that has worked it's way into the lens assembly, and is keeping the lens from initializing. Often, you can take compressed air and blow it into the front lens assembly, to try to free up the small gears there. H ... Sony Cyber-shot DSC-W55 Digital Camera

The camera (option m*5 pentax) got wet (on Songkran in Thailand). Now it works again except that it seems not to be able to load the battery. If I connect the battery charger while the camea is 'off'', the blue lights come one and after a few seconds go off again. If I connect the loader with camera 'on', it says: 'processing' and then 'connecting fail!"

... Pentax Optio M85 Digital Camera

Kodak Z1015 Brand new Kodak Z1015 camera. I take three shots and a message appears on the screen saying "PROCESSING". At this time the camera is inoperable. 40 seconds later the message goes and I can take another three or four shots, then same all over again. Kodak as much use as an ashtray on a motorbike. They say I must take a download from the Easyshare software, but that won't work. Any suggestions? Cheers, Dave Watts.

Have you tried downloading updated firmware. Also this camera is slow in processing photos(especially if you use the Smart Capture mode. Hope that helps ... Kodak EasyShare Z1015 IS Digital Camera

We just purchased a Nikon Coolpix L110 digital camera. We completed the start up process and attempted to take a few test photos. we took two photos with flash and on the second photos, a loud noise was heard when the flash operated. We could never get the flash to operate again. We have read through the troubleshooting guide supplied with the camera and changed batteries and settings. No luck. Any assistance would be appreciated!

Your flash shorted out...manufacturing defect....return the camera. ... Nikon Digital Cameras

I have an older (1996) Sony Handycam CCD-TRV211. I am using the player to transfer my old 8mm tapes to my computer. The player will play for about 4 seconds then stop. I get a blinking triangle with a line underneath it, only the eject button works when this happens. Many times the tape will not eject, it is trying but stops. Sometimes I have to physically assist the camera to eject the tape by precisely timing and placing hand pressure on the camera during the eject process. When I finall

... Digital Cameras

When turning the camera on. The mode settting screne comes up far a few seconds,then a messege pops up saying: Lense process to stop,and then the camera shuts down,not allowing the lense to advance. The battery is new and works fine.

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Mustek MDC 5500 Digital Camera

I have a fujifilm f50se and it is the second time I download the pictures from the camera to PC with Vista and have a i/o error and process aborted and can't download anymore pictures to PC

... Fuji Finepix F50FD Digital Camera

F50se I have a fujifilm f50se and it is the second time I download the pictures from the camera to PC with Vista and have a i/o error and process aborted and can't download anymore pictures to PC

... Fuji Finepix F50FD Digital Camera

After each photo there is a 5-10 second delay, the screen goes blue and the word "processing" appears with an hour glass, the battery is fully charged and the camera is only 15 months old, this is a recent problem and is effecting my ability to capture pictures...

Some possible causes: a slow card...purchase one rated for faster speed. Picture quality level set to highest level...pictures look great but take time to process. Some brands of cards are slow, especially the cheap ones. Stick with the big names. If ... Kodak EasyShare M863 Digital Camera

Sometimes, when I take a picture with my 40d the automatic shutter speeds that display can fluctuate dramatically from 100th of a second to 10th of second in just a split second before I press the shutter, leaving me with an overexposed picture. Why does this fluctuation happen?

Your camera is probably set to SPOT exposure instead of AVERAGE exposure,. Which means, your camera is taking readings from a smaller area within the frame instead of using the whole frame to decide exposure. When in spot exposure you can move a hai ... Canon EOS 40D Digital Camera

When using the flash is takes 4/5 seconds before I can take another picture. The taken photo appears for about 1 second then the screen goes black for 4/5 seconds before I can take another picture

I don't think it's the time to write the file. The original post says "when using the flash". The flash uses a big burst of power by discharging a capacitor or multiple capacitors. They take time to recharge. 4 or 5 seconds sounds about right. As yo ... Canon Powershot A2000 IS Digital Camera

I have a Kodak EasyShare C143 serial number KCGMU03223587 and this is my second one since August of this year. I had the same problem with both. The first one I was able to exchange, but the second one I can't since I haven't been able to find my receipt for it. The problem is I go to turn on the camera and the lens goes out so far and that is it. No screen or anything. If the screen does happen to come on it is on for like 2 seconds and it goes off. I take the batteries out and exchange them wi

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak Digital Cameras

Camera only records video in 10 second increments, regardless of the amount of memory available.. .why? i have a 128MB card, formatted, says i have about a minute 7 seconds available, yet it will only record exactly 10 seconds....

Yes some cameras do have such restrictins. Even my Canon Power Shot (an old 5MP) has. ... Olympus Stylus / mju 1050 SW Digital Camera

When shooting a movie, the camera automatically stops recording after 5 seconds. about 2 seconds before it stops recording, something like a meter bar appears on the right of screen, and it jumps up from 1 block to 4 blocks and stops recording. I can't record a movie for longer than 5 seconds!

Most cameras require a card that writes data fast in order to keep up with shooting movies. If your card is slow, you might consider buying a faster (albeit more expensive) one. ... Digital Cameras

Camera was dropped. Now it will turn on, but after a few seconds, lens begins to move in and out for about 3-5 seconds, then a messag is displayed: Pleaase turn camera off then on again". Doing this r

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Panasonic Lumix DMC-LZ3 Digital Camera

I keep getting a "pink" smear down the center of the second photo I shoot. The first photo is okay but the second has this pink smear. I have to turn off the camera and turn it back on to get a seco

... Pentax Optio A10 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0590 seconds