Having problems with your Samsung Digimax S630 Digital Camera ?

Number 252 on screen

\015 I have a samsung camera and when it switches on the number 252 comes up on the right hand corner of the screen. The camera doesnt stay on for long then switches off again, help!\015

Answers :

Well, the 252 is either the number of shots left or the number of shots taken. Read this....\015\012Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Samsung Digimax S630 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi When I turn the camera on and the lens comes out- the message on the screen says Lens Error 100.1.0,0 ( I think these are the numbers? Can you help? Thanks Leonie


Try these procedures. ... Kodak EasyShare M853 Digital Camera

When i turn my camera on it goes to a white screen and says lens error 111,0,0,0 then turns to black screen and says lens error 221,0,0,0...wuts wrong? i have a kodak easyshare c813, 8.2 mega pixels, 3x optical zoom if that helps at all


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Kodak Easyshare C813 Digital Camera

My kodak easyshare c813 will not turn on. it says on the screen lens error 111,1,0,0 and 221,0,0,0. how do i solve this problem? please help


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Kodak Easyshare C813 Digital Camera

Broken screen Well, my camera screen was broken i guess in my backpack. I had dropped my backpack somewhere and now when you turn on the camera you can see the screen cracks. it can still take pictures, but the screen is broken how much will it cost to fix it?? the model number FE-210 its an olympus


You will need to call Olympus to discuss the repair process and they will be able to give you the cost for the repair service. Their telephone number is 800-622-6372 option 2 and then option 3 ... Olympus FE-180 Digital Camera

When i turn the camera on, its turns off and then shows blue screen with massage: 5 f 0 8, 5 e 0 2, 5 f 0 8, 5 e 0 2


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... Olympus Stylus 710 Digital Camera

I have a Nikon D100 with a Nikon AF Nikkor 24-85mm 1:2.8-4 D lens or a Nikon AF-S Nikkor ED 7-300mm 1:4-5.6G VR lens. I'm on vacation in Hawaii and am troubled by an error that appeared today. The "number" displayed on the operating "screen" which normally shows the number of pictures which will fit in the memory available is jumbled and/or semi-illegible. The best way I can describe the number is as follows: If the number were "365" it appears as follows: 3 displays only the top and


You can try and reboot the camera, if this doesn't work then consult the repair shops and see if your display can be replaced for a low cost. For warrenty ifo con tact Nikon at their customer service center at ... Nikon Digital Cameras

Camera won't save pictures error message when turned on: !!! Bad data access address!! Bad Address = 0 X 00000028 PC = 0 X 00675e30 Reason: 15 sp = 0 X 00f1178c Domain: 11 and other numbers and then shuts down. Error message lasts around 5 seconds.


... HP Photosmart R725 Digital Camera

LCD Screen Does anyone know if the lcd screen for the Easyshare C743 is the same one that the C703 and C713 use. The Specifications listed on line for the C743 and C703 cameras seem to be the same, just wondering if the screens are the same. Part Number 3F9648 is listed online for the C703 and C713 model Thank you


I was told by a Kodak tech that the cameras are identical. The different numbers were a marketing thing. ... Kodak EasyShare C743 Digital Camera

When i turn camera on get blue screen that has date and time than in black letters i get lens error 221,0,0,0 and camera goes off


Hi there please follow the steps and let me know the result.\012\0121. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.\012\0122. Look carefully between the lens and the camera bo ... Kodak EasyShare C613 Digital Camera

White Screen I take some pictures and the camera works fine. But this morning when i switched the cam to take photos i see only a white screen with the aperture and speed numbers. Read like have a bright light in front of the lens. I took some photos but just took a white screen. The LCD of the camera work fine but i see other photos that i take. The day before this begin, i have take pictures without light, in the night. Can anyone have solution or recomendation to this?


I use fujifilm a850 camera but suddenly screen in white . but i click the picture done well & pictures save in memory card not issue but screen is white i dont see pics in camera pls tell whats the issue of camera pls solution ? ... Fuji FinePix S5000 Digital Camera

White Screen I take some pictures and the camera works fine. But this morning when i switched the cam to take photos i see only a white screen with the aperture and speed numbers. Read like have a bright light in front of the lens. I took some photos but just took a white screen. The LCD of the camera work fine but i see other photos that i take. The day before this begin, i have take pictures without light, in the night. Can anyone have solution or recomendation to this? I have exact


Hi,Normally there are two reasons for the given problem.1). Bad or defective CCD. and/or2). shutter not working. in\015\012the first case the only solution is the replacement of the CCD. Please cl ... Fuji FinePix S5000 Digital Camera

When ever i turn my fujifilm s5000 on the screen is white in both viewing taken photos or when trying to take a photo in both lcd and eye piece you can still change the date ect. and even scrowl thru memory card {white screen still} as if you were looking at the photos it tales you the code number of the photo or if its a video but still a white screen sometimes when you flick it to take a picture it comes up with the image then turns white and some times flickers of black lines go thru the scre


Hi,Have you tried to Use the Camera After Pulling out the Memory Card?If not Try it and let me know.Hope i helped you.Thanks for using ' Fixya ' and have a nice day!! ... Digital Cameras

Every thing seems to work but view screen is blue and takes a blue picture (has ripples that move when you point or move camera around like you can almost see something but you can't. My logo and phone number come up in the view screen fine when the camera is first turned on then it goes to the blue screen when the camera is ready to take a picture. Is it worth fixing???? Cost to fix???? Neil


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A85 Digital Camera

I am a 70 yr. old man. My children gave me a Finepix S1500 camera for my birthday. I would really like to start using the camera however I seem to have misplaced or lost the quick start users guide as well as the C/D and full users manual.Can you replace these items for me? Product serial number 9SA08013 F FX-S1500-US C Product code number 4547410086751 Bar code number (factory) 0 74101 48414 4


USB driver (software) and user manual can be downloaded in computer from Fuji Camera Support website.Please click USB Driver to download and instal ... Digital Cameras

What is the part number for the lcd screen on a samsung s850


Hello phoenixthis data is from the service manual:\015\012\015\012Part No. Q8100018501A Part name: LCD_PANNELGreetings from Colombia. ... Samsung S850 Digital Camera

Casio T2000 I have 125 PLUs to setup in a Casio T2000 register. . I'm trying to enter a description for a PLU. When i press any of the number keys the registor beeps while "E" is displayed on the register screen. I'm following the steps from the manual. Am i missing something? There is no number associated with the "E" that is displayed.


Hi. I cannot find a T2000 listing. This is not a standard Casio model number. It might be a PCR-T2000, or maybe a QT-2000. Could you have another look at the model number and get back to me, then I can help you out?Mark ... Canon Rebel XT / EOS 350D Digital Camera

Bonnie lens won't retract. message on screen lens error:122,1,0,0


I was getting the Lens Error message on my A730, even though my lens seemed to be working fine. I'd had the camera in my pocket, and apparently it tried to open but jammed. But it seemed to be OK except for the cursed Lens Error message when I'd po ... Digital Cameras

When trying to tag pictures for printing, once i hit the share button and then OK for it to go to the screen to select the number of prints, the camera just goes to the screen to take a picture instead


There is existing KODAK model no: CW330. I think you have a C330.\015\012\015\012I hope the fault will clear via uploading new firmware:\015\012Connect the camera with the computer.\015\012Turn the camera on.\015\012Clic ... Kodak EASYSHARE CW330 Digital Camera

My C-3000 is not opening the lens...the top screen is flashing 81 (the number of pics available on the card) the front screen is blank...I've changed the batteries and flipped through the power mode dial a bunch of times...what now?


If the camera hasn't recently been dropped, your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do ... Olympus C-3000 Zoom Digital Camera

The lens does not pop out when you turn it on. Making a clicking noise sounds like it is stuck. Turns the camera off. On the screen it says lens error115,0,0,2129


Hello,Here are the steps:1. Make sure you will install a new or fully charged battery/batteries into your camera.2. Clean the battery contacts.a. Remove the battery/batteries and the memory ... Kodak Easyshare C813 Digital Camera

I have a Nikon D40. I wish my photographs to be numbered consecutively, 0 to whatever the numbering system goes up to (9999?), even when using a new card, without going into different files or whatever. I named a file "Card 1". The photographs come out labelled "100Card1 DSC 0001" etc. Yestreday, for no apparent reason, having reached "DSC 1021", it then started back at zero and was labelled "101Card1 DSC0001". When I go into the Folders menu there is no mention of "100" or "101", just "card


You need to set "file number sequence" to "on" in the setup menu.\015\012However to get to this menu item you need to ensure that "CSM/setup menu" is set to "full", also in the setup menu.\015\012\015\012\015\012\015\012The setup menu is the on ... Nikon Digital Cameras

HI a friend of mine has a panasonic video camera, specifically the PV- L452D. Her camera is broken, and she lives in Cuba, where parts are unavailable. She wants me to buy her the necessary part, and bring it down to her during my next trip. Her camera's screen isn't functioning, apparently, she needs to replace the band that connects the screen to the body. The part number is LSCQ-0555-A, according to her. I have spent hours online and calling Panasonic. Nobody can find or sell me the pa


Part number LSCQ-0555-A is wrong. However the part description is clear, It is called LCD ribbon cable.I think that the part number may be ... Digital Cameras

I have a vistaquest vq700 with the wristvu photo watch. For some reason I can't get the camera to turn on unless its is plugged up to the pc to get charged. When its plugged into the pc a screen comes up and then the camera says establishing connection. Then the screen goes completly blank. The book has no toll free number or no troubleshooting context to help me fix the problem. What should I do?


... VistaQuest VQ-7024 Digital Camera

I have the Kodak C513, My cameras lens is stuck, everytime I turn it on my lens will not come out and on the screen it says lens error 20e,1,0,0 please help


Sounds like impact. Try putting new Good batteries in. If that doesn't work, you can contact Kodak to see where the local "authorized" service center in your area is, I know of 2 in South Florida.\015\012305-653-7355 ... Kodak EasyShare C513 Digital Camera

When i turn on my camera(md853)the screen reads "lens error 1 of 1,0,0"what s the problem?


Try these procedures. ... Kodak EasyShare M853 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2202 seconds