Having problems with your Samsung Digimax S630 Digital Camera ?
Drawing to much power over usb port
\015 When i plug my camera into my mac it says that the usb device is drawing too much power and the usb port will be deactivated, so i haven't been able to move any of my photos to my comp.\015
I am having the same problem... and I have a Mac... everyone suggests getting a card reader for it instead of plugging it in directly. Inexpensive too.
Use a USB port on the back of the PC, not off a hub, or use a powered hub, It cant take more than 500mw of power per USB port, even though there are 2 ports, they may be off the same controller inside the pc. I use a powered hub and have not had that problem ever since. I had a webcam that drew 450 and no other device worked off that port.
Repair Help & Product Troubleshooting for Samsung Digimax S630 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Drawing to much power over usb port
I am having the same problem... and I have a Mac... everyone suggests getting a card reader for it instead of plugging it in directly. Inexpensive too. ... Samsung Digimax S630 Digital Camera
Everytime i connect the usb cable to my mac (any mac, ive tried 5) i get an immediate error message saying my usb device is drawing too much power and is being disabled. I cannot connect.... more info: the battery is fully charged when i try and do this and since there is way to connect to an external power source..i dont know what to do.
Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Digital Cameras
When i plug my Nikon Coolpix L100 into my computer to upload pictures, a popup shows up saying "USB Over Current Notice. A USB device is currently drawing too much power. The hub to which it is attached to will be deactivated."
Connect the camera directly to a USB port on the computer, not through a hub.Alternatively, don't connect the camera to the computer. The best way to download pictures from your camera to your computer involves removing the memory card fr ... Nikon COOLPIX L100 Digital Camera
Software S-SW70 Cant down lode the software of the cd. I got a Mac with Leopard i have the same problem! when i put the cd into my computer a blank screen appears as the installer! i also can't download my pictures with a USB "A USB device is currently drawing too much power" message appears. PLEASE HELP
Go to my computer and right click on mouse>manage then go to "device manager" and find your camera's devices... try to uninstall it... after that rescan device manager... ... Pentax Optio E40 Digital Camera
I have a L200 camera. When i plug it into my usb drive it says power sure on hub port. A usb has exceeded the power limits of its hub port. Is the camera just too advanced for my computer? Its a sony VAIO, i wouldnt think so?
Avoid all those problems and concerns by getting yourself a card reader for downloading your pics. ... Samsung Digital Cameras
Power surge Hi, Everytime I connect my camera to my computer, the computer gives an error message saying a power surge has occurred on the USB port and so it disconnects the USB port. I bought a new cable to connect the camera thinking that might be the problem but I still got the same error message. Hope you can help!
... Pentax Optio S40 Digital Camera
Can't connect to pc through the usb port. I used to be able to connect the camera to any pc by connecting with the cord to an usb port - all I did was connect and switch on the camera and it gave me the option of 'computer' and then it would give me the option to open the files and download onto the pc, but now when i plug it into the usb port and switch the power on the camera just switches on and does not show up in the computer at all so my photo's cannot be downloaded onto my pc
Hi, ... Casio Exilim Pro EX-F1 Digital Camera
My computer does not recognize the camera anymore, and when I insert the camera's usb cord into my usb port, it says "power surge on USB port. This only happens with my camera, not any other USB device.
It's possible that the sequence or work flow is upsetting the computer, I know sounds odd but, without the camera hooked up the the computer does it appear to be working okay? If so are you downloading (attempting to download) the pictures directly t ... Sanyo Digital Cameras
Downloading images When I install the cable to download images to my computer, I am getting a message that there is a "Power Surge on Hub Port". This has come out of nowhere, it was working fine last week. The detailed message says "A USB device has exceeded the power limits of its hub port". Any ideas? Thanks, Ann in Toronto
Possibly a short in the camera, cable, or the port itself. Recommend trying another port. If that doesn't help, then please see the following blog article, as it describes the use of a card reader as a much easier, faster, and less error prone way ... Canon PowerShot A540 Digital Camera
Usb connection when i connect the camera with the computer an error message appear saying that the usb port overpass the limits of power of it concentrator port
Try using a separate card reader to download your pictures to a folder you create on your desktop. ... Fuji FinePix S304 Digital Camera
I have a Fujifilm Fine Pix A340.When I tried to down load my pictures onto the computer a message came back that the usb port had experienced a sudden surge of power which has rendered the port unusable despite clicking on the reset message and now the usb cable will not go back in any of the ports.Do I need to buy a new cable? Or what can i do? Can I do anything with the computer?
... Digital Cameras
Power surge on USB port
Disconnecting other USB devices does not work. I contacted Live support on pentax site and they said issue is fault in circuit card in camera which requires shipping back, and paying for repair. They knew right away what issue is, so probably fairly ... Pentax Optio S40 Digital Camera
Vivitar 4345 exceeding power limits on usb port
I dont connect my vivicom 4345 with my pc i dispose XP systeme ... Vivitar ViviCam 4345 Digital Camera
Stylus 770 SW Camera - causes Power Surge on USB port
Blown USB ports can happen. Most of the time, they still move power...like you can still charge devices through them, but the device won't be recognized. See if a hub will work. \015\012\015\012Rob ... Olympus Stylus 770 SW Digital Camera
USB decide problems with power limits of its hub port
Any solutions? ... Nikon Coolpix 5900 Digital Camera
Olympus SP-310 purchased June 2006. Accidentally touched a regular USB (non-Olympus) to the camera's USB port. Now it won't power up or anything. Is it fried, or can it be repaired? JT
Http://olympusamerica.com/cpg_section/cpg_servicerepair.asp\015\012\015\012Olympus will charge a flat rate repair fee for this produ ... Olympus SP-310 Digital Camera
When i plug in my GoPro Hero camera with the usb cord to my Macintosh desktop, the computer tells me that the USB is taking up too much power so i must turn the camera off. What am i doing wrong?
... GoPro Digital Hero 3 Digital Camera
When trying to upload images the pc says power surge at hub port - doesnt recognise camera. camera is charging and connected to the usb port
... Hitachi Digital Cameras
I have a canon power shot a720 is. friend pluged a charger into the usb port thinking thats what she was suppose to do. now can not get it to power up for anything. is there any hope, or is it possible to get a downloaded repair manual?
Sorry there is nothing you can do to fix the camera. To fix it you need to replace the PC boards in the camera. Your friend shorted the camera out and there is no down-loadable repair manual for it. I would just replace it s ... Digital Cameras
I just got a Fuji Finepix S1500 and the viewing screen is showing a somewhat distorted image --- it looks like fine lines or minute color bleeds on the screen. In addition, when I connect the camera to the USB port of my computer it keeps saying that there is a "Power Surge to the Hub Port". Please help!
You are not supposed to connect the camera to a USB hub. Try connecting it directly to the USB port on the laptop or PC. Also, if the batteries are rechargeable and pretty much dead, the drain on the USB may be a bit much. Have you tried using fresh ... Fuji FinePix S1000FD Digital Camera
Hey Guys, whenever I connect my Konica Minolta DiMAGE X60 to my PC (WinXP, Service Pack 3), I receive the following error message: "Power Surge On Hub Port". I already checked the internet to solve the problem, so I know how to get rid of the message box. But it doesn't solve the problem... I also tried to reinstall the drivers for the USB ports. Need help!
When i connect my KonicaMinolta Dimage 60 to my computer. camera does not go beyond Initialization. Has anyone had this problem? ... Konica Minolta DiMAGE X60 Digital Camera
After I plug in the usb cable into the computer and camera I get an error that says the usb is pulling to much power
I have encountered this a lot myself in my work, not only with cameras, but with essentially USB devices. What you should do is try another USB cable with your camera. If it persists, then try another memory card with your camera. If it persist ... Akai DC6371 Digital Camera
My kodak m1063 only charge for 8 minutes connected to the wall charger or the USB port of my computer, so i have to prees the power button to charge for 8 minutes again but now, does not power on and the led blink green once and red 10 times, I don't know whats wrong... Please Help
When charging from the computer the camera has to be switched off. If it isn't the camera is using its power to transferre pics.\015\012\015\012If you do not have access to a dif. battery. A way to test the battery:Pls. take the bat ... Kodak EASYSHARE M1063 Digital Camera
I have a kodak easyshare 10.3 megapixel camera that is less than a year old... when i plug it in to the power supply or the usb port on my computer, i get no response... think it's a power cord problem or a battery problem... help... mx1063.. kcgkm83921697.. thanks, [email protected]
This camera may have a warranty on it. Call the Kodak support from their website.You may also use a card reader, if the camera works okay otherwise. ... Kodak EasyShare One Digital Camera
Philips Universal USB AC Charger Model SCM7880/12 Output. 5.4v 350mA Can you please advise if this can be used as a power source (220 volt mains connected or using internal battery)for the current model Canon Ixus 990 IS using the USB connector port on the Canon camera. Thank you Ian Albery Email: [email protected] Tel: 0033 4 75 90 12 21
Yes you should be able to plug it in and it will maintain the power, But usually when usb is connected to a camera, the camera screen shuts off and goes into a transfer mode not allowing for picture/video caputure ... Digital Cameras