Having problems with your Samsung Digimax S630 Digital Camera ?
I can not get my computer to recognize the camera.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.
The best way to download pictures from your Digital camera to your computer involves removing the memory card from the camera and plugging it into a card reader, they are available on eBay for less than $5.00 (either built-in to the computer or connected via USB port). This type of download method is much faster than connecting the camera to the computer using the Camera's software, I know because I have tried it both ways, an added advantage is you won't run down your camera\015
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
When I plug in my camera to the computer, instead of getting the two toned alert that indicates that the computer has recognized that new hardware has been attached to the computer, it makes a three tone alert. When I go to "my computer" the camera doesn't show up. But if I turn the camera off, the computer makes the two tone alert indicating that it recognizes that the hardware is uninstalled. What does this mean? I have been able to plug my camera in with no problems for the last four years s
If your goal is to get your pictures, try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a ... Canon PowerShot A75 Digital Camera
My zoombrowser program will not recognize when my camera is attached to the computer with the supplied cord. The computer recognizes that a camera is found, but will not let the program recognize it. Lately, I've also been getting the note: invalid class string. Then I have to uninstall the complete canon program and install it all over again. Then the program works, but still says no camera found. And, the camera is set in the mode to load to the program.
Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Canon PowerShot A95 Digital Camera
When I connect my camera to the computer I don't get a popup window asking what I want to do with the camera. When I first got the camera there was no problem but after getting a new HD and reinstalling Windows XP and the Canon softwareI I can't seem to get any pictures off the camera. I do get the sound from Windows when I plug the camera into the usb port and turn it on that it recognizes somehting is there but then nothing else happens. Also when you turn the camera off Windows makes the soun
You might be able to type play back in your search bar under the start menu depending on your computer and o.s. (operating system) and bring up that window. ... Canon PowerShot A620 Digital Camera
Hello, I have a Kodak EasyShare C813 digital camera that is not recognized by my computer. The memory card is also not recognized by my printer. Now it gets confusing. If I take some pictures with the C813 then take the card out of it and put it in my M530, connect it to my printer with a USB cable I get all the pictures off of it. Every solution some very kind people have suggested assumes the C813 is recognized by my computer or printer but that's not the case. The C813 was working j
Please un-install the driver software from your PC , then reinstall the driver or by connecting the camera to the PC to be detected as a new hardware and subsequently installed. If this is not the case then it is for sure th ... Kodak Easyshare C813 Digital Camera
There are pictures in the camera but my computer says the file is empty. How can I get my computer to recognize the contents of the memory card. It recognizes that the camera is connected.
Reinstall the software for the camera ,then try again if not purchase a card reader ... Sony Cyber-shot DSC-W130 Digital Camera
Can not get computer to recognize my Canon Rebel camera on her computer. My wife has installed Canon Solutions Disk 31.0 on her computer and is able to down load photos from her Canln A720 IS camera. I can not. Have reinstalled Solutions disk per instructions but still Rebel camera unrecognized. Can you please help?
You're saying that the computer can't even recognize your camera when you connect it to your computers USB port? If that will be the case try connecting the camera on a different USB port on your computer or try to connect it to another computer so w ... Digital Cameras
When i purchased my video camera i did not notice that the software was missing, it is now more than 30 days and the store will not assist me they told me to go on the site and odwnload it for free i cannot locate a download I really need to get the video I've taken from the camera and onto my computer I have loaded the drivers; however, my computer is not recognizing the video camera when it is connected to the computer using the USB
May i have the camera model, so it would be helpful for furthur assisting..\015\012\015\012LEave me comment here..Ill solve your issue ... Digital Cameras
I can not get my computer to recognize that the camera is attached to download the photos from the camera to the computer. I just purchased the camera in April and was able to download to the computer one other time....
Check your computer usb port if working properly by plugging other device that working. or installed your camera to other computer to check which one caused problems. ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera
My computer has decided it cant recognize my digital camera anymore. I have uninstalled the driver for the camera, and reinstalled it, still the same. Also been on the camera website to find the up to date driver for camera.Downloaded this, and still the same. I have taken out the camera sd card and placed it in the processor, still not recognizing camera. What else can I do to get it to work?
Looks like you've tried most of the options, my only thoughts are, and I don't intend any insult, \015\012\015\0121) Did you swicth the camera on once connected? And have you tried more than one USB port?\015\0122) Assuming you prob ... Ricoh Caplio G4 Digital Camera
My photos won't transfer to my computer. The the last time I loaded photos onto my computer which was last week, it worked fine. however today the same computer says it does not recognize the USB device, so the camera wizard will not come up. I work in a office so in tried several different computers, none worked. some say usb not recognized, some say there is a power surge at the hub, whatever that means. So bottom line is I'm not able to get my photos onto a computer. What changed since last w
Change the USB port. If you are connecting it to front USB of your computer, try connecting it to USB port at back of computer.. \015\012\015\012The cable might be fauty. ... Kodak EasyShare C330 Digital Camera
Please Help I took these pictures with my camera for work, but I forgot to put my SD card in. The pictures are on my camera, but I can't get them on the computer with the cameara cord.The camera doesn't even recognize the removable disk drive on either one of my computers. Its Easter Sunday, no specialty camera stores are open and I have to have these pictures in by tomorrow morning.
The manual and driver download are here:\015\012\015\012manual + driver\015\012\01 ... Samsung Digimax S630 Digital Camera
My computer does not recognize that the camera is connected to the computer. It has never worked since I bought the computer, HP Pavillion with Windows Vista. Worked fine on old Dell but can not get any transfers from camera directly on this new computer, only from SD Card.
Do what the pros do...use a card reader instead of the camera. ... Nikon COOLPIX L5 Digital Camera
My computers are not recognizing the camera is hooked up with the cable, and thus I can't get the pictures off the camera. I can use a card reader for the ones saved to the memory card, but how do I get the picture saved directly to the camera memory off the camera?
I don't know how to save the pictures onto the memory card maybe in your settings you can change it to external memory or something and your USB cable is probibly stuffed up so you'll have to get a new USB cable goodluck ;) and please rate this solu ... Panasonic Lumix DMC-TZ1 Digital Camera
Just tried to hook up my camera to my computer and the computer is not recognizing the camera for some reason. Is it possible that the USB cable is bad. I am not getting an error message and we have done this many times without the software installed. We installed the software that comes with it and it wn't allow us to do it either. We just downloaded norton antivirus 2009 to our computer and this is the first time we have tried since doing that. I think the USB cable is bad but it's pretty new.
I think the USB cable is bad or ur USB port might be loode.. ... Canon PowerShot S5 IS Digital Camera
My camera is new and i can't get my computer to recognize the camera to download the pics. i have had to purchase two usb cords and still no download. when i connect to computer no icon comes on to install and no instructions with the disc. please help otherwise my camera only serves half its purchase and you can have it back.. thank
Solve your problem and do not use the download programs.Buy and use a card reader and eliminate problems I used to have, since I have many kinds of point and shoot, repairing and fixing them. I have used a card reader and need none of the softw ... Polaroid I533P Digital Camera
Hello, I cant get my computer to recognize my camera (Canon powershot SD780) when I plug the USB cord into my computer from the camera nothing happens. I click on computer and it is not in there. I am using Vista Home Premium. Any help is appreciated. Thanks! Brian
Try using a card reader instead of your camera. ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera
I cannot get my pictures from my camera onto my computer. I just got the camera and installed the software, but when I plug it in it's not recognizing my camera to transfer the pictures onto my computer
Try a few things before making a purchase:\015\012\015\0121) Check other USB ports to plug into on the computer. Is anything registering as a camera on your desktop when you plug it in? If not, move to step 2.\015\012\015\01 ... Nikon Digital Cameras
I cannot get the pictures off the camera. When I plug it into the computer the program will not recognize this camera my canon A590. So I am unable to download my pictures. I do not have this problem with any other of my cameras. At first I thought it was the usb cable, but I have tried other cables and they do not work either. Any Ideas. I use a mac computer and Iphoto program. At times, I have gotten it to work, but now nothing. Please help thanks T Riley
Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot A590 IS Digital Camera
I am trying to connect my Leica Dicomar 12x official zoom 4.0 mega pixel still picture recording camera to my MacBook into iMovie and when I plug the USB from the camera into my computer it is not recognizing the device. It is on PC connection mode. Do you have any idea how to get the video from the camera to download onto my computer?
... Leica Digital Cameras
I have a VC-S1414 digital camera and can't get my computer to recognize the camera. Any suggestions. I have turned it off and back on, I have changed the usb location on the computer and still nothing.
If you have a memory card , removed the memory card then put it in your card reader in the pc. so that you can upload your picture or try to download the installer of your camera sothat it can recognized your pc. ... Sanyo Digital Cameras
Where can I get free software for my D-360 Olympus camera? I have lost mine and can't get my computer to recognize the camera when I plug it in.
Http://www.olympusamerica.com/cpg_section/cpg_support_product.asp?id=527.\015\012\015\012\015\012\015\012That is a link to yo ... Olympus Camedia D-360L Digital Camera
Camera not recognized by the windows 7. But there is no problem getting this camera recognized by Apple computer. Please help!
Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Canon IXUS 980 IS Digital Camera
My computer is not recognizing that my camera is plugged in. I have tried two different computers (a Mac and a PC) and neither of them recognize it. I have pictures on the internal memory and I can't get them out!!
In the camera menu, there should be an option to copy the internal memory pics to a memory card. Once there, use a card reader to download them to your computer. ... Kodak EasyShare Z712 Digital Camera
Camera Connection Hi, I am having problems with my camera connection to my computer. It is hooked up via USB, but my computer is not recognizing the problem. Any tricks or ideas I can use to get it going?
Two things:1. The USB cable where it connects to the camera has to firmly in place otherwise it can disconnect from the computer even though it appears to be connected.2. In the HP 635 'Set up' menu there is a section called U ... HP Photosmart 635 Digital Camera
My computer doesn't recognize my camera ViviCam 3785 I could not get my new Canon SX110 to be recognized by my pc. I was using a similar cord for another device. After I switched to the white cord that actually came with the camera - voila! No problem, it worked like a charm. I guess all cords are not made alike? This site helped me, I hope this helps someone else who may need a little more description.
I run into this problem all the time with different cords. It seems that vendors like to keep you returning only to them when you have a problem with their devices. Thanks for the post ... Canon PowerShot SX110 IS Digital Camera