Having problems with your Samsung Digimax S800 Digital Camera ?

Installation Problem I cannot install the driver for my Digimax S800. I even downloaded the drivers to make sure it wasn't a problem with the disk, but it still came up with the same error message: "An installation support file could not be installed, the specified module could not be found" Can anyone please help?

Answers :

Try NOT using a driver.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.
Repair Help & Product Troubleshooting for Samsung Digimax S800 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Installation Problem I cannot install the driver for my Digimax S800. I even downloaded the drivers to make sure it wasn't a problem with the disk, but it still came up with the same error message: "An installation support file could not be installed, the specified module could not be found" Can anyone please help?

Try NOT using a driver.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireW ... Samsung Digimax S800 Digital Camera

I installed Dimage x onto my new laptop with windows vista. First, I received a message that it was not compatible...but then there was something to click that made it compatible. After that I downloaded pictues and it worked fine. I went to go online and there was a problem. I decided to do a system restore and no matter what I did, I'd get a non-specified error. A guy from HP told me the camera software corrupted files and I'd have to do a system recovery. 1) is this correct? 2)how do I get an

I can't help with the techy side I am afraid but we have the same camera and also have a vista laptop. We have not had a problem but I don't think we have ever tried plugging the camera into the laptop as I just put the sd card straight into the lapt ... Konica Minolta DiMAGE X Digital Camera

Have been trying to install my IXUS 80IS. Keep getting message "Cannotinstall the hardware Error Code 1". From advice on the Microsoft support site, I have created a setupapi.log file to try and identify the registry sub keys which may be the possible problems. I'm in beyond my depth here. Can you help, Please. David Reid

Hi,\015\012 Well , more or less the problem seems with the operating system only.\015\0121. Disconnect the camera from the computer, disconnect all USB devices as well , except for keyboard and mouse\015 ... Canon IXUS 80 IS Digital Camera

Lens Error I recently had a problem with my Casio QV-R4... every time I'd turn it on, the lens would retract and I'd get a "LENS ERROR" message on the screen. I talked to customer support and they told me that Installing the new version of their firmware, v1.01 would fix this problem. I've since installed the new firmware version, but I am still receiving the lens error. Has anyone else encountered this problem? Does anyone know how to fix it? Please help!!!

As solutions 1 & 2 indicate, lubing the gears works!! This is a great camera, so I hope all of the QV-R4 owners try this. I may become a maintenance item for the camera.\015\012 \015\012I have a few a ... Casio QV-R4 Digital Camera

CF Card I took my cf card out of my camera to be sure I got the right card when purchasing another card. My first card was 1.0 GB and I purchased another, 2.0 GB. I tried inserting the new card tonight and could not get it to go in. I then discovered that I had the card turned the wrong way when installing. I finally realized the way it should go in and got the card installed. Once in the camera, I began getting an error message saying "Err CF - There is a problem with the CF card. - Replace the

You can actually buy a replacement card reader at darntoothysam.com for $21.95. ... Canon EOS-20D Digital Camera with 17-85mm Lens

Have an Olympus Digital Camera FE-280 and had and put the Olympus Master 2 disk into my computer. Was running fine until I tried to install an upgrade that Olympus sent me. Now I am getting an error message from the Microsoft Visual C Runtime Library that says the following "Runtime error! Program C...Application has requested the Runtime to terminate in an unusual way. Please contact the appli8cations support team for more information." I think it may be having a problem with the Family Tr

Before anything else, DO system restore to bring you back to a date where you didnot install Master2.\015\012\015\012another way is:\015\012you can try to delete it manually on your registry. \015\012go to registry and control ... Digital Cameras

I have Sony cyber shot DSC-S730 cemara,i took some pictures and wanted to download but i could not, In my PC i get a message saying autoplay and i removed it from PC and wanted look pictures in camera itself but i am not to see in camera itself, it says file error. can you help me in this problem. Thanks

Memory stick/ card has virus. Scan it with updated anti-virus and check again. ... Digital Cameras

Wenn i install the disney pix video editing software my computor gives an fatal error and restarts. After the restart it keeps showing messages it can't install the camera drivers and software. I did an format c: and new windows xp installation. The same problem again after new installation. How to solve this problem? I think there's an error in the installation cd.

I'll apriciate your website and it came up high in the google list. But i bought a new product that doesn't work. I'm not willing to pay for a solution. So i looked a bit furder and posted the problem by digital blue. Waiting for a reply.... ... Disney Pix Micro Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t

HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Zoom Error Just bought an Olympus SP550 Ultra Zoom for my daughter. In less than 24 hours the cam developed a problem. When she turns it on, the zoom lens goes part way out, a message "zoom error" shows on the screen, and it powers itself off. We thought it might just be the batteries, but new ones didn't help. Similar problem with SP-560UZ On power up lens clicks & sticks when zooms out. Then get "zoom error" & powers off. Tried new batteries, helping lens out. Leaving batteries out. Could not

I think a grain of sand was blocking the zoom tubes. This will not work if the camera has been dropped & the zoom apparatus is bent. It is entirely at your own risk & may invalidate any guarantee but they may charge anyway if you have got san ... Digital Cameras

I have a Pentax K 100 D. I have tried using a Flash Memory card (a Sandisk Ultra 16GB) but without success. The message 'Memory Card Error" is displayed even before I could format it. The card had previously been used to store files from my PC (where it worked perfectly) but the camera could not format it even after I had removed all the files etc by reformatting it in the PC (FAT32). Is there any way I can get to use this flash card in my camera?

Hi Doc.SD cards different in size use different technology. there are design changes introduced at 2GB and 4GB that makes cameras not compatible with all cards.When this camera was introduced, it was compatible with cards up ... Pentax Digital Cameras

Application error Installed the drivers from cd, followed all the diretions. Hook up camera. Clic "Kids Cam Sticker Factory" icon. program opens and then I get an application error... here is the details on what it says. "The instruction at "0x0047b55c" referenced memory at '0x00000004" . The memory could not be "read" What is the problem? I uninstalled the complete program and reinstalled it...same problem. What can I do from here?

Your solution can be found HERE:\015\012http://members.driverguide.com/driver/detail.php?driverid=1194582 ... Sakar Kidz Cam Digital Camera

Lens Error I have installed new batteries in my camera, and when I turn it on, I get a message that says Lens error. The batteries are installed correctly, what do you think the problem may be. Thanks

It sound like your lens is either jammed or the motor that causes the lens to open has a problem. First try spraying a can of compressed air around the lens while you turn it on. Also make sure that you are using high output batteries. ... Vivitar ViviCam 5386 Digital Camera

The Software supplied with my Everio MG 155 Camcorder won't install on my Laptop using Windows Vista. Message received below. The InstallShield Engine (iKernel.exe) could not be installed. IKernel.exc could not be copied to 'C:Program FilesCommon FilesInstallShieldEngine6Intel 32'. Make sure that you have the appropriate privileges to copy files to this folder. (0x20) Can you please assist. Thank you. William Henry

Hi,\015\012\015\012The software supplied with Everio MG 155 Camcorder was written before introduction of the Windows Vista. That is why you are not able to install software in your laptop. \015\012\015\012Contact your JVC Product S ... Digital Cameras

I have a sony handycam dcr-TRV70 and I have installed the the installation disk ver.1.5 image mixer and winASPI for win XP. I HAVE winXP,sp3.When i turn on the cam selector switch to VCR,WINxp "FOUND NEW HARDWARE" APPEARS but it doesn't recognize or complete installation since it can not find file:sony dv-vcr then it aborts and error message:can not install".I have the i-link IEEE 1395 CABLE CONNECTED BETWEEN THE CAM AND THE COMPUTER.i recently HAD A COMPUTER CRASH AND RESTORED-IMAGED to THE A

Http://www.tomshardware.com/forum/53160-5-vista-sony-handycam-firewire-problem\012\012\012When you downloaded SON ... Digital Cameras

Card problem 2 days ago i got the memory card out of the camera and insert it into my notebooks card reader, after i insert it back into the camera and error message appeared "card not initialised" and i can't figure out what the problem could be tho the laptop has no problem in reading the card. can i have some help pls ?

After downloading to the computer, did you use the computer to erase the card? If so, you need to format the card in the camera. ... Fuji FinePix S5700 Digital Camera

Frame error Turn on and take photo and then a message comes up saying "frame error" and then Even shutting the camera off. When turning it back on it still says "frame error" . When you take several photos you only end up with a very few on the memory card. What is the problem and how can i fix it? I cant view any of the photos. I replace camera with a new battery. Could it be my SMART CARD. Need help! Fuji MX-2900

... Fuji MX-2900 Zoom Digital Camera

CF error I own a Canon 400D. It worked perfectly until today. I inserted the cf card, and turned on the camera. It took a couple of seconds to light up, and I got a message that the cf card was faulty and needs to be replaced. I used another one...it said the same thing. I tried reformatting. It gave me an err99 and then said that "shooting is not possible" I formatted the card on the computer...no luck. The pins are in place, I checked. What could be the problem and how could I go about solving

My canon xti had the same reading cf card error 99.\015\012Since my camera is out of warranty. I had to find a way to fix it. After reading all possible solutions in this site, I looked at the pins (that used to connect to the CF card) and foun ... Canon EOS 400D / Rebel XTi Digital Camera

ZOOM problem for some reason my camera started going crazy, some pictures didnt come up instead they said "file error" but recently my zoom feature has jus like not worked it goes to 1.3x zoom but thats as far as it goes and the zoom takes forever to go from 1x zoom to 1.1x zoom to 1.2x zoom to 1.3x zoom so anyone got any ideas? im in colorado right now could it be the cold or altitude?? bc its under 10 degrees outside and im at 10000 feet up or could it be something else? i did take like 5 pict

Most likely there is a problem with servo drive for the lens and camera functions. The fix is to replace the complete processor board including the servo drive electronics. After replacement the board must be tested and calibrated. \015\012 ... Sony Cyber-Shot DSC-S500 Digital Camera

Just received it back from tec support saying fine memory stick may need formating which i already explaned id done even with new stick, my problem been when you take pics photos going into file when you open them to view some are file errors , this happens alot.

Hi you need to get the memory card a put it into your laptop and just put a few pictures on it, (it wont show on the camera when you view it) but after that put the memory card back into the camera and take a picture and you will be able to view it. ... Sony Cyber-shot DSC-S730 Digital Camera

I am trying to download pictures from a Canon Pwershot A75 for the first time to my laptop. I have installed ZoomBrowser EX from a CD. Unfortunately I am traveling and don't have access to the CD. When I plug the camera into my laptop using the UB port here is the error message I get a message that states "One of the USB devices attached to the computer has malfunctioned and windows does not recognize it. I followed the wizard to correct the problem and then the wizard tells me that the driv

Try the following:\015\012\015\012Use a different USB port on the computer.\015\012Reinstall the chipset driver for the computer.\015\012Try use any other USB device on the s ... Canon PowerShot A75 Digital Camera

Canon 1000D Hello there, I'm in China at the Beijing games. my 1000D is giving me a error message 99. can't take picture. I have turn it off and on, take the battery out but the problem still come back after 4 or 5 snaps. please help. I have change lenses and clear the head but not winning. Thanx well i have the similar problem, that i could identify that the camera goes off state after 30 mins, then i found that the display power cannot come, but the camera is working with view finder, if i

Yep set the auto turn off higher and instead of removing the battery, just open and close the battery compartment.This appears to be a problem I have raised with Canon, hopefully they will release a firmware update soon to fix this ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I am having trouble down loading my pictures, which was not a problem before. I now show on my desk top ACDsee 10-ACDsee7- ACD photo editor and ACD see 10 photo manager.' there was also a message that there were certain files that could be affected . It did take me almost a half hour to down load my pictures to night, which was rather frustrating to say the least. do I have to many ACD programes how do I correct the problem. I am almost at the point of trying to find another system.

Hello,\015\012Uninstall the ACD and then restart the system, after restarting reinstall the ACd back to the system. \015\012\015\012If your problem is only to copy or download pic from the camera to the PC. the computer detect autom ... Digital Cameras

I have the Canon Rebel XTi. I am getting a message the CF card has a problem. I am able to put card in computer and it opens the files that are on the card. The camera screen shows a blank space where the photo count should be. I have cleaned the connectors on the body of the camera and the lense. The camera is maybe 1 1/2 years old and I have taken maybe 10,000 photos. could the card need to be replaced? or could it be the camera itself :<(

HiLook inside the CF reader at the pins... is there one or more that are bent or broken? This is most likely the problem.If we need help with parts or the repair (every pin has to be soldered on individually) please let us kno ... Canon Digital Cameras

Tried to down load pictures from my new A630 to my existing Cannon utilities program. The program would not open. I then took the new Solutions disk and installed the programs. /when the installation was complete I tried to down load the pictures again. When I attemted to down load I got an error message the Zb Module had encountered a problem and had to close. I got the same response when I tried to open the Zoom browser. I tried from the shortcut and by going direct to the programs.

SteveJudy, Uninstall all utilities related to the Camera in question (via add/remove programs within control panel), re boot, and install the utility from the disk that came with your new A630 and give it another try.Good luck. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3340 seconds