Having problems with your Samsung DualView TL220 Digital Camera ?

Front display is currently in demonstration mode How to turn off?

\015 "Front display is currently in demonstration mode" I get this message everytime I turn my camera on. I think have to push the Shutter button to make it go away? Also my settings are not saved from previous usage. Anyone have any suggestions?\015

Answers :

Why i turn on my camera it says on the screen front display is currently in demonstration mode.

to exit: shutter button
and when i try to upload the pictures to my computer my computer doesn't read my camera.
Repair Help & Product Troubleshooting for Samsung DualView TL220 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Front display is currently in demonstration mode How to turn off?


Why i turn on my camera it says on the screen front display is currently in demonstration mode.to exit: shutter buttonand when i try to upload the pictures to my computer my computer doesn't read my camera. ... Samsung DualView TL220 Digital Camera

Fujifilm A330 My camera is doing something rather strange; it's always switched on by sliding the front shutter open all the way, and it's ceased turning on when I do that. My dad and I figured out that we can get it to turn on by holding the 'on' button in the back, but it won't get out of the menu/blue 'no image' LCD display for reviewing pictures. In the past, holding the 'on' button was what changed it from picture review mode to picture taking mode, and since everything has swapped around t


My switch was dirty... very dirty. I took my camera apart (NOT SUGGESTED FOR THOSE WHO DO NOT KNOW) and cleaned it which was NOT the easiest job. I would take it in to get it serviced if youw ant to play it safe. Take it apart only if you expect to n ... Fuji FinePix A330 Digital Camera

A85 Dead During a normal session, switching from picture-taking mode to view mode, the lens would not retract and the picture in the view froze with the current image. I could not turn off the camera. After a while, the batteries got very hot, so I removed them. I took out the CF card. Later, I replaced the batteries and the put the card back in. The camera worked very briefly, but the LCD view would not work, displaying flashing lines on a black background. New batteries didn't help. The camera


I read something about the fuse going out...http://www.dcresource.com/forums/archive/index.php/t-18151.html ... Canon PowerShot A85 Digital Camera

When camera gets turned on, the lens goes in and out of focus a few times and then screen turns blue and displays "D : 5f08 5e02" and does not go back to shooting pictures again. But for just looking at the pictures on the memory card, it works if turned on in that mode. If turned on in photo-shooting modes, it cannot be switched back to view photos. (OLYMPUS M700)


It's a sensor issue. The error indicates there is a problem on the lens.It may be caused by sand, broken gears or any other foreign object in the lens mechanism.A simple fix is to turn ON camera while holding it with\015\012the len ... Digital Cameras

When I turn the camera on, it buzzes four or five times (a sound I have never heard it make before) then displays "Please turn the camera off and then on again". When I turn it off, it buzzes again two or three times, the screen goes blank, but the lens does not retract. The battery is charged, and the problem is the same whether in picture or display mode, whether plugged into the computer or not.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-TZ50 Digital Camera

LCD screen turns purple in shooting mode. Photos can be taken. Most are Ok, some slightly out of focus or faded coloration. If switched to play back mode and then back top shooting mode, display is Ok for a short time then degrades from top center in a V shape to a purple line display.


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free worldwide, and may also include free shipping both ways (free shipping varies with countries). This is regardless of your camera's warranty status. ... Canon PowerShot S410 / IXUS 430 Digital Camera

The display on my Ixus 500 has gone blank. It started to show weird colours when switched on but turning it off then on returned the display to normal. I knocked the camera the other day and the display is now blank both in camera mode and picture review mode. The camera makes the usual noises when selecting Menu etc. It also save picture to the memory card. Is it worth taking it to bits to look for a loose connection?


This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot SD100 / IXUS II Digital Camera

No image on LCD screen, only irregular lines of varied coloring. When picture is snapped, it is of these lines--no image. Help. Details: I turned the camera to shooting mode but it does not display the image of what I want to shoot, but just a series of horizontal lines. If I take the shot, it shows the lines which were displayed on the LCD screen. If switched to playback mode, previously shot images show up fine. I checked the batteries; they were fine. I replaced them anyway, to no avai


I have the same problem and after doing research, I found this website. ... Canon PowerShot S1 IS Digital Camera

When i turn camera on in display mode it is fine when i put it in camera mode it turns off!


... Fuji FinePix F710 Digital Camera

When I turn the camera on, the canon logo appears on the display and the red light in back above the menu button keeps blinking, but nothing happens. When I turn it on in the "taking pictures" mode or "view pictures" mode, it just hangs and acts like it has trouble reading the CF card. I've tried multiple cards and had the same problem, so I think it's the camera and not the cards. Any ideas?


Canon logo is starting of camara indications just as company manuals ... Canon PowerShot S1 IS Digital Camera

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.


Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera

My camera won't take a picture, just it flashes, and the display says busy. When I press the different adjustment buttons the display says "this function is not selectable in the current shooting mode". However, changing shooting modes does not make any difference.


... Canon EOS Rebel XSi Digital Camera

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.


... Panasonic Lumix DMC-FZ28 Digital Camera

When you turn it on the screen displays "mode dial in not in the proper position." Mode dial does not turn properly.


Something seems to be broken or off between the mode dial and the switch. It also may have broken internal parts. I have had a camera with a similar problem. It was that the small switch inside was broken, and could not be repaired. These ... Panasonic Lumix DMC-FX100 Digital Camera

My flash seems to be stuck in the "suppressed" mode. Also the Manual on page 64 refers to a "turn" of the "command dial" to the "flash mode setting". Since that item is not described anywhere else and the only turnable dial is the "mode" dial, I assume that it means to press the flash mode arrow. When I do that nothing happens. The flash modes do not display as described in the manual. I can't figure out how to get the flash to function properly again. I have made all my attempts with fre


Remove memory card and batteries, press and hold power button for 5 seconds, wait a few more minutes, put just the batteries back in and try it. Also make sure zoom and lens are not dirty and no debris on them. If so, use rubbing alcohol and cotton ... Fuji FinePix S1000FD Digital Camera

My Canon EOS 450D wont display the: Green square mode, P, TV, AV, M, A-DEP or the Portrait modes when I turn the dial. How do I fix this?


Your camera is broken, dial and circuit board underneath needs replacement. ... Canon Eos Digital Cameras

I have a panasonic DMC-TZ3 when I turn it on it displays mode dial is not in proper positon. It will let me take pictures in certian modes but will not let me view pictures or be on the heart mode ro scn1. Can you please Help!


I assume you have tried rotating the dial back and forth to try to clean the contacts when camera is off. If this hasn't worked, try dropping some contact cleaner, available from radioshack or try alcohol first, with a toothpick under the ... Panasonic Lumix DMC-TZ3 Digital Camera

My Panasonic Lumix DMC-TZ2 camera has a blurred display within 25 seconds of being turned on when in any mode other than playback. When the display blurs, it quite quickly becomes unviewable, and if I try to take a photo, an error message saying WRITE ERROR PLEASE CHECK THE CARD shows on the screen. The card seems fine and pictures I took before today all look good, both on the display and in a computer. Is there any fix, or do I need a new camera?


This is a problem with the camera lens and yes this can still be fix but you need to have it check on a service center but that price will not be cheap so if I may suggest it will be better to get a new camera..... ... Panasonic Lumix DMC-TZ2 Digital Camera

Ok so i am turning on my camera (an Fe-340) and the lens go in two or three times then when the screen finally does come on it is blurry and way out of focus, also when i attempt to adjust the zoom the camera turns itself off, if i attempt to turn the camera off using the power button it goes off but the lens does not retract.All other functions on the camera are operating correctly to my knowledge i can even take a blurry out of focus picture, view it in display mode or even transfer it to my c


It may be something more serious, but the problem you describe is\015\012frequently due to corrosion on the battery contacts inside the camera. \015\012Remove the batteries and wipe the camera contacts firmly with a clean\015\012cloth (heavy corrosio ... Olympus FE-340 Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli


Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).


HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera

My Dynax 5D will not release the shutter nor will it turn off unless the battery is removed. The access light and the display remain on when the camera is turned off at the switch. All menus and autofocus work as normal, it will simply not release the shutter in any mode or with any of my Konica Minolta brand lenses.


Always use the best quality batteries available, I used some cheap batteries in my compact and had problems but it came good after a while with good quality batteries. Also the automatic lens protector had some grit stuck in it from the beach stoppin ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera

When I turn my 550 PowerShot on, I get a blank screen (black for the most part with white camera symbology around the screen, such as the flash symbol, etc). The screen works, as I can click a picture and see the photo momentarily. I can also view my saved pics. When I select the film mode, the screen looks normal.......meaning it displays a color image of what is in the lens. Have I inadvertently selected a mode which is causing this phenomenon?


Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot A550 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

The camera is brand new and when I put in the battery and turned the camera to Auto focus mode - I don't get a picture in the LCD screen but instead I get battery power information indicators that I am in full auto mode and the quality of the picture I plan to take - where is the display?


Check the manual and if it does not do what it is meant to do then bring it back to where you bought it for an exchange.Do not waste your time with it. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2656 seconds