Having problems with your Samsung L200 Digital Camera ?

I have a samsung L200 digital camera. It was working fine until my 2 year old little girl decided she needed to play with it. Not sure if she done something or not but now the camera will not work. When I try to turn it on the power button lights up but that is all that happens. The screen does not come on or anything else. Also the lens seems to be stuck and will not go back in. And I also just noticed that the power button will only turn the camera on but will not turn it off. I was trying to


Answers :

Sounds like she may have dropped it and caused a lens problem. I don't know how much damage you've done so far in attempting to disassemble it but, if you can, put everything back and try the following:\012\012

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Samsung L200 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a samsung L200 digital camera. It was working fine until my 2 year old little girl decided she needed to play with it. Not sure if she done something or not but now the camera will not work. When I try to turn it on the power button lights up but that is all that happens. The screen does not come on or anything else. Also the lens seems to be stuck and will not go back in. And I also just noticed that the power button will only turn the camera on but will not turn it off. I was trying to


Sounds like she may have dropped it and caused a lens problem. I don't know how much damage you've done so far in attempting to disassemble it but, if you can, put everything back and try the following:\012\012 ... Samsung L200 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

Dropped camera i dropped my camera and when i turn it on the screen looks cracked and it white! it looks broken on the inside. I have a polaroid i830. One day i dropped it on the floor, and it doesn't work now. If i push the power button on, the power light comes on, but the screen and everything stays off. I also can't get the light to turn off unless I take out the batteries. The screen appears to have a crack. Is there any way to fix it before spending to get a new one ??


My camera fell out of my pocket book and busted the door. I glued it. that worked for about 6 months. I need the door for it and it will be as good as new. ... Polaroid i832 Digital Camera

CRACKED SCREEN dropped my camera and when i turn it on the screen looks cracked and it white! it looks broken on the inside. I have a polaroid i830. One day i dropped it on the floor, and it doesn't work now. If i push the power button on, the power light comes on, but the screen and everything stays off. I also can't get the light to turn off unless I take out the batteries. The screen appears to have a crack. Is there any way to fix it before spending to get a new one ??


You cannot repair the broken LCD screen; the white you are seeing is the backlight for it.\015\012LCDs have extremely thin gold deposits along one edge that is contacted by a silicone rubber strip that has fine wires molded into it vertically and one ... Polaroid i832 Digital Camera

Ok so i am turning on my camera (an Fe-340) and the lens go in two or three times then when the screen finally does come on it is blurry and way out of focus, also when i attempt to adjust the zoom the camera turns itself off, if i attempt to turn the camera off using the power button it goes off but the lens does not retract.All other functions on the camera are operating correctly to my knowledge i can even take a blurry out of focus picture, view it in display mode or even transfer it to my c


It may be something more serious, but the problem you describe is\015\012frequently due to corrosion on the battery contacts inside the camera. \015\012Remove the batteries and wipe the camera contacts firmly with a clean\015\012cloth (heavy corrosio ... Olympus FE-340 Digital Camera

Samsung L730 My camera appears to be stuck. The lens usually pops out when it is turned on. However, when I turned it off today, it remained out. I tried removing the memory card and battery. Also, it won't turn off unless I remove the battery. When it is on, the screen is black and the usual green light goes off after initially pressing the power button. Is there a way to reset it?


This camera would have to be tested more, but it sounds like a ccd or sensor problem. If this camera was made around the year 2000 or after a bit, then it could be a ccd problem common with many Sony made ccds in this period.A loose conne ... Samsung Digimax L730 Digital Camera

I have a HP camera CW450t camera and cannot turn it on with the power button on top. I know the batteries are good because I can turn on the camera with the review button and review the pictures that I have taken. When the power button is pressed the green light on the back of the camera flashes but the lens does not come out and the led screen does not come on. when you take your finger off of the on/off button the green light goes off as well.


Had the EXACT same problem with the CW450 model. I called support because I was mad and wanted it replaced. The support tech helped me through the issue. The answer is- NiMH. Alkaline batteries are unstable and not powerful enough for use with this c ... HP Digital Cameras

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.


You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

EX-S880 Shutdown I have a problem with my camera where it will automatically shut down as soon as I push the shutter button. The on/off button will not turn the camera on, but it will turn it off. I can turn it on by pressing the play or record button. I can also record with it as well. I just cannot take snapshots--it powers down right away. Anyone else have this problem? I've only had the camera for about a week.


First off make sure that the battery when charging is a solid red light and NOT flashing. If it's flashing that means we have a problem with the battery. Make sure you are only using a Toshiba, Panasonic or Sandisc memory card that is n ... Casio Exilim EX-S880 Digital Camera

When I power up the camera the lens opens and immediately retracts and the camera shuts off. I've attempted to push every button while turning on the camera to no avail. I also held onto the lens when it opened. Though the lens remained extended, the camera powered off. When I turned it back on the lens retracted and the camera powered off.


Have you made sure that the batteries are LiIon and fully charged? I had a similar problem with a Kodak Easyshare camera that required the higher voltage LiIon battery pack rather than alkaline AAs which will fit in there but is not exactly right. ... Kodak EASYSHARE M763 Digital Camera

Canon SD4000 camera, when hitting the power button, the screen remains black screen, the green light blinks twice, lens zooms out, shutter opens. Screen remains black, and I do not seem to have any control at all; pressing the zoom button doesn't move lens, no notable reaction to anything. Hit the power button again, the lens zooms back into it's original position, shutter closes (occasionally does not shut completely), green light blinks twice, screen remains black. Tried turning on w/o SD card


... Canon SD4000 IS IXUS 300 HS Digital Camera

I charged the battery and when I put it in the camera and press the power button the orange light next to the play button turns on for a moment, flashes and then turns off. When I plug my camera into my computer, the display screen still works so it's not a problem with the screen.


The batteries could be used up and not holding a charge. Try some fresh alkalines and see if that works. ... Olympus FE-340 Digital Camera

The camera was bought in Berlin two weeks ago from the SONY CENTRE !After downloading the pics to my PC for the second time,I erased the pics in the memory card also for the second time,and put the battery on the charger at night! So far so good!The next morning when i placed the fully charghed battery back in the camera and pressed the power ON,the lens goes IN-OUT three times and the screen indicates in a menu 'Turn the power off and on again';Also out of this menu on the screen(monitor) the '


Hi there lakispapNormally , this error would indicate a lens error where the lens cannot extend out of the barrel. Usually it's because of accumulated dirt in the lens sheath , but since you camera is only 2 weeks old , this is barely an ... Sony Cyber-Shot DSC-P10 Digital Camera

The camera was bought in Berlin two weeks ago from the SONY CENTRE !After downloading the pics to my PC for the second time,I erased the pics in the memory card also for the second time,and put the battery on the charger at night! So far so good!The next morning when i placed the fully charghed battery back in the camera and pressed the power ON,the lens goes IN-OUT three times and the screen indicates in a menu 'Turn the power off and on again';Also out of this menu on the screen(monitor) the '


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-Shot DSC-P10 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

My Kodak V1233, isn't working right. If I turn it on, it will only turn on a second and extend the lense and then shuts off (it's fully charged). I can eventually get to take pictures, if I start by hitting the favorite button, and then the camcorder button and then quickly hitting the the camera button. I can take pictures, but can't see them, I only see a black screen. The camera will not power off this way. If I take the battery out, and then put it back in, and hit the favorite button,


I have had the exact same problem this seems to be a common flaw in this model i do not suggest any one purchase the V1233 ... Kodak EasyShare V1233 Digital Camera

When I push the power button, the lens cap comes out and on the screen is a very brief shot of what the camera is aimed at. The camera stays engaged for one second and the lens cap goes retreats back into the camera and the power goes off and nothing is on the screen. This happens after the battery has been fully charged also.


Try to remove the rechargeable battery and use a battery of the same \012type but an alkaline like the energizer. Sometime rechargeable battery \012malfunctions that it seems fully charged but actually is not. If the \012camera continue to power on w ... Kodak EasyShare M1093 IS Digital Camera

Power Shot G2 camera is at date screen when you turn it on. I changed date battery and it will not let me change the date. Camera has only be used 3 times. The camera powers on and lens moves but it will not leave the date screen nor do any of the buttons work to advance the time and date.


I had a similar problem. I solved it by taking the rear cover off and reseating a ribbon cable that connects the switches to the main circuit board. This connector is hidden under a large plug in connector - also a large copper/plastic ground plane ... Canon PowerShot G2 Digital Camera

My Pentax Optio M60 lens seems to be frozen half way out of the camera with the lens cover also partially open. When I turn in onn it sounds like the lens is trying to focus then turns intself off. Nothing is written on the screen unless I also press the menu button which displays VER 1.00 before bleeping three times and turning off or the green button which displays VER 0163A SBM -FIRM before beeping 3 times and swithcing off. Nothing else seem to do anything. I havn't dropped it or got the cam


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Pentax Optio M60 Digital Camera

Last time I tried to turn on my camera (Samsung SL502) the lens came out but the screen didn't come on. I hit the power button again and nothing happened, now the lens is extended and won't go back in...pressing the power button does nothing but the camera makes a funny sound. Please help. Camera is 6 months old.


Sounds like the lens mechanism is stuck - mine does the same thing after my 2 year old dropped it on the cement. Looking for a replacement lens now, but not having much luck. Read the previous posts for other solutions. Good luck! ... Samsung SL502 Digital Camera

When I push the power button on my camera, the blue button turns on and the green light above the T lights up for a second and then goes away. Nothing happens and I can't do anything with the camera. The lens is also stuck out and turning the camera on does not make it go back in.


Take a Q-Tip dampened in rubbing alcohol and clean the contacts inside the battery compartment. Also clean the battery itself and the charger contacts. ... Samsung L200 Digital Camera

Optio M20 Camera: Press on/off button to power up camera, the camera opens the lens cover, turns on a red led inside the lens, cycles the lens out and back in,then makes about 5 little popping noises. The back screen shows Pentax Optio screen for a second, then then the screen displays the word Auto Picture in the center of the screen and Green Mode at the bottom and at the same time it cycles the lens out and in. And for a brief moment in the back ground of the screen you can see the picture st


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

Camera problem.. hi every time i turn on my camera, it turns on, but turns right off.. i have a sony cybershot digital camera.. and every time i press the power button it just says cybershot on the screen like if its about to turn on but it just shuts right off.. and the battery is fully charge.. and the lens is just sticked out lik if it froze or something.. help??


Umm well i would think it is doing that just to save the battery so lik wen u turn it on then i would use it as soon as u turn it on if not it probley thinks ur not going to use it so lik i said turn it on and use it as soon as u turn it on......... ... Sony Cyber-shot DSC-W80 Digital Camera

Turn on camera and screen lights up with an image that seems permanent. Can't get into the menue or anything else. The zoom and picture taking button work but the viewing screen will not change from what looks like an image burned into the viewing screen. I can hear all the normal functions but no change occurs on the screen when trying the differnt options for the camera. Please help. My camera is Power Shot SD400 Digital ElPH. Sincerely


Hi,Please replace the battery to solve this issue. ... Canon Digital Cameras

I have a samsung digimax A402 camera. I have never had a problem with it powering on until now. I have placed brand new double A batteries and when I press the power button on the camera the screen tells me my battery is low and the camera powers off. I have tried different brands of batteries as well. What is the reason my camera will no longer turn on and stay on with new batteries installed?


My camera did exactly the same thing. I found that there was a minute trace of corrosion on one of the battery conections inside the body of the camera. After cleaning up the contacts to remove the corrosion the camera powered up without fault. It di ... Samsung Digimax A402 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4970 seconds