Having problems with your Samsung S1050 Digital Camera ?

Image is very bright after picture is taken

\015 Hi,\015\012\015\012We have just purchased a Samsung S1050 and started to take some pictures. When we went to review the pictures, they were extremely bright and you could not make out the picture.\015\012\015\012Can you please offer any advise on how to fix this problem.\015

Answers :

Try lowering or changing the setting of your cameras flash.
Repair Help & Product Troubleshooting for Samsung S1050 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HI All of a sudden, there is lets say no more image on the display or the image is purple and full of weird lines. No image at all and when I click to take a picture everything works out well: the flash the mechanism but no picture appears as taken Thanks. My fine pix has a similar problem . In movie mode it is fine but when I take snaps all images are found to have bright white horizontal lines , looks like a light sensor problem , no solution found so far . :(

BUT NOW U HAVE FOUND SOLUTIONCCD FAILURE !but u will get it repaired Free of Charge as Fuji has taken notice as all manufac and i got my S5000 repaired Free from Fuji just call them tell them about BAD CCD it is a known manufa ... Fuji FinePix S5000 Digital Camera

Image is very bright after picture is taken

Try lowering or changing the setting of your cameras flash.\015\012thanks. ... Samsung S1050 Digital Camera

Blank Screen I have a Sony Cyber-shot model #DSC-S40. The screen is bright white with an occational blur of the image I am aiming at. I have taken the batteries out several times and that cleared it up one time but has since went back to the white screen. I can still take pictures using the veiw finder but I can not see them on the screen nor can I access any menu functions. The camera still takes awsome pictures so I don't want to just throw it away. Please help! Thank You, Tim

I have been facing the same problem with same model and this is permanent problem it seems with this model (Sony Cybershot DSC S40). It causes because of the following:SYMPTOMSLCD display is either blank or WHITE. When the cabine ... Sony Cyber-Shot DSC-S40 Digital Camera

Powershot Pro 1. The camera overexposes images. All pictures taken in moderate to bright sunlight comes out white. Detail completely blown out. However, no problem when the flash is used. The flash also pops up in all situations. Even when light is good.

... Canon Powershot PRO 1 Digital Camera

My camera konica minolta g400 makes pictures taken outside they are really bright, can't see the image? How do i fix this it was working outside but not now?

... Konica Minolta DiMAGE G400 Digital Camera

Kodak M763. Display works all right if I review photos already taken, but there is usually no display when I try to take a picture. It's black. It may be that, if the battery is fully charged, I may see a display in a sepia tone or a bluish overcast. The information on the screen is bright, it's the viewfinder image that can't be seen. It would have helped me if I could turn it on while its charging, but I can't. That would have solved te question of a low-voltage electrical input. If a subject

Battery could be your issue, But it could be more then that have you try ed to firmware it. Go to the manufactures website download the latest firmware and update that. Now if that does not work don't kill the tech here he i ... Kodak EASYSHARE M763 Digital Camera

Please help! I have a Canon Powershot A460. When I take pictures in macro mode, they are all flashed out, so bright even if taken indoor. I can barely make out an image. But if I take normal shot, results seem normal. I have read the manual -basic & advanced- but I can't find the right solution. This does not happen before.

Try going into the M(anual) mode on the selector dial and then turn off the flash (press the right side of the controller button until you see the lightning bolt with a bar through it). The macro shooting option should still be available in the manua ... Canon PowerShot A460 Digital Camera

Hi there,can you help me with opening and processing RAW images taken on my D70s. I want to use photoshop to process the images - I have photoshop CS. It will not open my RAW(NEF) files even tough NEF is listed as an option on the "open with menu".so now I have loaded Nikon Picture Project. Picture project is doing some very strange things like opening images that have been deleted from the memory card and only opening one of the recently taken images. I saw in Photoshop Help that you can downlo

I am waiting for a solution. I have sent payment through paypal so hope it has got through to you OK ... Nikon Digital Cameras

There is no image when it is in camera mode but can playback pictures taken before the problem occured. when i take pictures no image in the lcd monitor and no picture taken when i check in playback

A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very b ... Canon PowerShot A460 Digital Camera

Purple screen when i go to take a picture the picture comes up purple, but you can review all the pictures ive taken in the past and they come up just fine. ive already taken battery out and all that stuff but it still has the purple screen syndrome.like when i got to take a picture it has a purple screen, you can still kinda see the image in it, and once the picture is taken and review it is purple though all previous pics are just fine, what is wrong with my camera? can it be fixed?

... Casio Exilim EX-Z50 RED STAR Digital Camera

Bright pictures I have had my Sony Cyber Shot (DSC-S650) for about 6 mo. I have tried all different settings for the flash but almost all of my pictures come out with the person very white and bright. The pictures are fine if taken outside in natural light but anything other than that and my pictures are very white and bright. I have even tried to turn the flash all the way down on the manual setting. This is the third Sony Cybershot camera that I have owned and have never needed to change any o

Hey JAKI-LYNN,\015\012 I would reset the camera to the factory default settings in case something got set wrong. You can reset the camera in the setup menu and it is called initializing the camera. I would then set th ... Sony Cybershot S650 Digital Camera

Suddenly I cannot search for images on my camera face.It seems to be stuck on one early photo. I tried to go to " lock " images -no help. also my computer will notprint pictures taken since July 28 or so. The camera worked fine until this AM. Can you also tell me how to delete a pic I don't want recently taken? ( if the other problem gets fixed )thank you so much Mickey Savage in Oregon I am so hoping I have not lost those latest pictures !

You need to remove the battery from the camera for 5 minutes, if that doesn't reset the programming then the camera has failed and you will need to send it in to an repair center, check your user manual for locations. as far as the images go if you c ... Polaroid i733LP Digital Camera

The screen on my M380 does not show the image. The camera is fully charged and when I press the "on" button, the lens extends and opens. The screen is illuminated, but there is no image of what the picture will be. I can go ahead and take a picture -- it makes the appropriate sounds as it normally would and the flash goes off if needed. In fact, when I then plug into the computer, I can see that a picture was taken. However you cannot focus the shot because you cannot see the image on the s

This can be a settings problem on your camera, so what we can try doing here first is to reset or restore the camera's settings to its default and then after doing that power off the camera and take the battery out for 5 minutes then put it back in a ... Digital Cameras

Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.

Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera

When i turn the camera to take a photo, no image appears in the LCD or the eyepiece. this just happened all the sudden. I am able to view pictures that I've already taken in the LCD and the LCD will also give me the menus, picture count, everything that you would expect to see except the image that you want to take a picture of. i tried to take a picture, but the screen was just black as well. any and all help will be appreciated! thanks, mark

Just this week-end, i experienced something similar with my s5000. the playback function works correctly, however when you switch to'shoot' mode, the lens does not extend & there is no image on the screen. could this be a damaged CCD as well, or poss ... Fuji FinePix S5000 Digital Camera

Nikon D40 pictures taken but too dark even in AUTO mode with flash on a bright day. also, some days ago I had the Shutter release error message while taking some photos. After that, the camera is acting weird, pictures sometimes are taken but the picture is always dark, although flash is used and AUTO mode selected. I do not see the error message anymore, but the camera simply do not take pictures properly. I tried formatting, etc with no result.

Make sure flash is on your flash on cam is sticking. ... Nikon D40 Digital Camera with G-II 18-55mm Lens

I have a Sony DSC-F88 5.1MP camera... When you switch it on to any of the program modes - image dispalyed on LCD and photographed is distorted. Image is skewed with the edges of the image flaring with three colours to the edge. A kind of focus shift..low resolution image - sort of semi solarised picture. Any previous picture taken displays normal on the LCD... I have tried other memory sticks.. no change..

Your DSC-F88 has problem with CCD Imager and needs to be replaced. Good news is Sony will replace it free of cost. Click Sony Official ... Digital Cameras

Pentax E30 Digital Camera: When I take pictures under the sun or even at dusk, the pictures are too bright or pure bright with no image at all. I can only take normal pictures during nighttime. I have tried to change the settings, the white Balance, EV compensation and sensitivity, it still wont' work

Its sound like if the iris motor wont go to the good position its could be the light sensor thats needs to be tested...\012?\012\012hope that give you an idea\012regards Alan ... Pentax Optio E30 Digital Camera

Same problem. The LCD image is sort of "pinkish", and when I take a picture, the image is white washed, barely recognizable. Although when I review images taken previously, the pictures are perfect. Strange.....

If you're not able to view the images while capturing the images. Then, it seems that there is a CCD issue with the Camera. If you've purchased the Camera in the U.Splease open the link below to get more information about this issue ... Sony Cyber-Shot DSC-T1 Digital Camera

Everything works except showing the image on the monitor prior to taking picture. Play works on monitor, info screen works on monitor and pictures can be taken. Just won't display image on monitor prior to taking picture.

... Olympus EVOLT E-500 Digital Camera

Taking indoors pictures makes no problem, but when I take pictures outside or outdoor specially during daytime the taken picture some kind of over brightness or like exposed it turns everything bright

Be sure you are using an auto mode. Have the white balance set to "auto wb"...the ISO to "auto ISO" or somewhere between 100 to 400. ... Nikon Coolpix 2500 Digital Camera

Removing date/time I've already taken some great pics on my camera, but when i got the images back, and when I review the photos on the camera, I now notice the little red date and time info in the corner of my pics. Some of these pictures I can't wait to frame, but not with that crap in the corner...can someone tell me how to remove the date and time from the photos I've already taken, so I can get unspoiled images. Thanks, A

Inpaint is a uniquely easy to use software solution for effectively removing unwanted elements from digital photos. It allows the user to remove people, blemishes, distractions a ... Sony Cyber-Shot DSC-P73 Digital Camera

The Canon Sureshot SD1000 takes black pictures. No image when looking at the LCD and no image is taken when taking a picture.

You probably have a blown CCD unit. If it has been exposed to intense heat, such as laying around in a car for long, this is prone to happen. If it's still under warranty, take it in for replacement, if not, check if there has been a factory recall f ... Canon PowerShot SD1000 Digital Camera

If the picture is taken vertically in EOS 400D SLR, there will be a black shade appearing in right side of the image. This issue was not there earlier. In recent times it started happening. It works fine if the picture is taken horizontally.

I would be interested in seeing the dark image... check that its not the camera strap or some other part of your own pereson. Hold the camera UNDER the lens and take a vertical, noting where the camera strap is at the time. Perhaps put an example on ... Canon EOS 400D / Rebel XTi Digital Camera

Green output when i take pictures in well-lighted places , the image become greenish. I already tried changing the WHITE BALANCE and even the FILTER setting but still there is a problem. Although when the picture is taken in dim places, the output is nice & good, showing the actual colors of the image

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2440 seconds