Having problems with your Samsung S760 Digital Camera ?

I just put on a new pair of batteries. but when i press on, my camera will turn on for a second and then, turn off again automatically.


Answers :

Sounds like a lens problem. Try these:\012Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Samsung S760 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just put on a new pair of batteries. but when i press on, my camera will turn on for a second and then, turn off again automatically.


Sounds like a lens problem. Try these:\012Fixing a Lens Error on a Digital Camera\012\012This has to be THE mo ... Samsung S760 Digital Camera

Hi, My Yashica EZ F9 Zoom will not turn on. The "on" green light will flash for a moment but then the camera shuts off within seconds. I put in fresh batteries, new memory card, and nothing happens. I can download pictures that I already had on my previous memory card onto my computer, but it won't let me take any pictures because the camera won't turn on for more than a couple of seconds. Please help...


Sound like a problem with the lens stuck; is common defective that need new lens unit replacement or just repairable.This has to be THE most common failure mode for a digital camera. Some \015\012com ... Digital Cameras

My camera will not turn on. Just before this happened, I was getting info on the camera that the battery power was low and I had only 10 seconds before it went off. I would put in a new battery and them same thing happened. Finally, the power is off and even when I put in new batteries and check to be sure they are in correctly, I still can't get the power to come on.


Can I have the make and model of the camera? And what type of batteries you are using re-chargable or the regular batteries? ... Digital Cameras

Turning on. my camera won't turn on no matter what I do, for a few days it said low battery and i won't lie i kept turning it on, but one day it turned off but the lens never went back inside and the camera won't turn on. I replaced the old batteries with new ones, but it didn't work. I press the button, but the light only flashes for a second before blinking out.


Here are some simple things to try first for a camera that won't power on. They won't work for every case, but they're worth a try. Think that the first listed fix may work for your camera:\015\012\015\012 ... Canon PowerShot A520 Digital Camera

Won't turn on despite new batteries fitted correctly. The camera was bought in 2008 and only used a few times but now it won't turn oni've put brand new Duracell batteries in it and when you turn it on the screen come on for a second then turns straight off again.please help.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sanyo Xacti S650 Digital Camera

When I put my gopro camera to F default mode in order to have video mode come on when I turn the camera on, for an instant it will be in video mode but then automatically switches to 10 second timer mode? Also I was shooting some ice climbing and the camera stopped filming in every occasion on its own after about a minute or so even thoug I have set it on "OFF" for manual turn off- could it be because temperatures were -12celcius even though I have a lithium battery? Finally I have files from 1-


What card are you using? They are particular to which cards they will work with. ... GoPro Motorsports Hero GMHW50 Digital Camera

Camera turns on ok and I get an image on the screen, but when pressing the "shutter" butoon nothing happens. The camera is a Nikon Coolpix E2000 we have put in new batteries and new memory card Help!


... Nikon Coolpix 2000 Digital Camera

Hi I have the problem with the charger Whenever we put the battery in the charger for charging the indicator on the charger turns on green but after few seconds turn off. It is stated in the manual when the indicator is off it means the battery is fully charged but when we put the battery in the camera it shows low battery the battery and the charger are new can you please suggest the solution


Hi,\012Please let us know the make and model number of your digital camera and the charger. Also, let us know the year of manufacture of the battery.In most cases, this particular problem is seen if the battery is ... Digital Cameras

I'm a new user of the D90 (and digital in general), and on my first major trip with it I had problem with the shutter not working. I would take some images, put the camera down without turning it off and move on to the next spot. At the second stop the camera would not work. I'd turn it off, remove the battery, run the lens in and out and eventually it would work again. The message I got was F--, which said that the lens was not installed properly. However the lens was never removed. What's


George,Since you didn't say if this was a "new camera & lens" or if it was a "new to you" camera and lens, or which *exact* lens you have, there are a couple of ways this can work.Nikon lists the following remedy for error ... Nikon D90 Digital Camera with 18-105mm lens

My camera won't turn on. I put in brand new batteries straight out of the package and i put them in to the camera and it sttill won't work. i hold the power button for about 10 seconds. Not working.


AA batteries can be placed in the camera the wrong way around. They can also cause corrosion of the battery contacts if left in for long periods or run down. I would check these two things before assuming a fault. ... Vivitar ViviCam 3780 Digital Camera

I just put new batteries and pressed the ON button and it turns on OK and records but only when theres no memory card in it. As soon as I put the memory card into the camera it comes up with 'err' and turns itself OFF. please help.


... Oregon Scientific AT18 Digital Camera

Hi I have the problem with the charger Whenever we put the battery in the charger for charging the indicator on the charger turns on green but after few seconds turn off. It is stated in the manual when the indicator is off it means the battery is fully charged but when we put the battery in the camera it shows low battery the battery and the charger are new can you please suggest the solution


... Panasonic Lumix DMC-FZ18 Digital Camera

The camera was bought in Berlin two weeks ago from the SONY CENTRE !After downloading the pics to my PC for the second time,I erased the pics in the memory card also for the second time,and put the battery on the charger at night! So far so good!The next morning when i placed the fully charghed battery back in the camera and pressed the power ON,the lens goes IN-OUT three times and the screen indicates in a menu 'Turn the power off and on again';Also out of this menu on the screen(monitor) the '


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-Shot DSC-P10 Digital Camera

The camera was bought in Berlin two weeks ago from the SONY CENTRE !After downloading the pics to my PC for the second time,I erased the pics in the memory card also for the second time,and put the battery on the charger at night! So far so good!The next morning when i placed the fully charghed battery back in the camera and pressed the power ON,the lens goes IN-OUT three times and the screen indicates in a menu 'Turn the power off and on again';Also out of this menu on the screen(monitor) the '


Hi there lakispapNormally , this error would indicate a lens error where the lens cannot extend out of the barrel. Usually it's because of accumulated dirt in the lens sheath , but since you camera is only 2 weeks old , this is barely an ... Sony Cyber-Shot DSC-P10 Digital Camera

Hi I have the problem with the charger Whenever we put the battery in the charger for charging the indicator on the charger turns on green but after few seconds turn off. It is stated in the manual when the indicator is off it means the battery is fully charged but when we put the battery in the camera it shows low battery the battery and the charger are new can you please suggest the solution


This is a problem with the charge , because sometimes even though the charger is is new its really not working fine , so it will be better if you have it replace... ... Digital Cameras

Yes in my new sx30 IS I opened it new put the battery in it and a chip, and turned it on, powered up ok, then the lense Loudly shakes and after a few seconds the LED readout says lense error, camera will shut down which it does. I restart it again and the same thing happens. Can you help or did I just get a defective camera?


More than likely it sounds like you have a defective camera. ... Canon PowerShot SX30 IS Digital Camera

I have a Polaroid Impulse QPS and it won't turn on anymore. Usually to take photos I open the flash and a little red light comes on next to the button that you press to take a picture. In a couple seconds it turns to green and I can take the picture, but all of a sudden the light stopped going on at all. so when I press the button, nothing happens. I was thinking maybe it's a battery problem, but I can't figure out where to put batteris in the camera! I got it used, so I've never done it be


... Digital Cameras

Help The last time I used my camera a maybe a week or two ago, it shut off because the batteries died and the lens never pushed back in. So, I just now went to turn it on after putting in new duracell batteries in, which I have used all different kinds in my camera, I have it sent so that the Samsung icon is on as it starts up. So that came on and after a second you can see on the LCD screen but it is blurry and after a few seconds I hear 3 loud annoying beeps and then it shuts off. What could b


The 3 beeping sound as ou call it annoying means that the camera has low battery capacity. the lens is stuck out because there is incorrect battery connection. there is an option on the camera setting for the battery type. try this one:\015\012 ... Samsung Digimax S630 Digital Camera

I have a Nikon Coolpix 3.6x. When I plug the cord in the camera to load the pictures into my computer, I then turn on the camera, the camera goes *beep*, the monitor flashes on a second. then goes back off. I've checked the cord connection into my computer and put new batteries in my camera. It has done this before, when I deleted the pictures from my camera. It was something between the scene and playback buttons I think, but I can't seem to straighten it out. Can you help?


Try using a card reader instead of the camera. ... Digital Cameras

Hello, I have a Canon powershot SX100 IS, and everytime i turn it on it beeps and says on the screen "lens error, restart camera". I have tried tapping it, shaking it a bit. turning on and off. Put in new batteries, taking memory card in and out. Turning it on at different angles. Connecting to the computer. But nothing is working, it wont even let me look at the photos when i press the play button, and that doesnt even require opening the lens! please help! thankyou.


Try these procedures. ... Canon PowerShot SX100 IS Digital Camera

Canon A400 Hi, I have the above camera (canon power shot A400) and have just solved the E18 error by tapping the plastic A/V out cover - THANK YOU ! However, now, although the camera turns on, lense extends and I get full working order - after a few minutes I get the message 'Change batteriers'. and the camera dies. I have now put in several new batteries (including the little(cr1220) but the same message keeps coming up and the screen and the whole thing dies after a few seconds. Is this a furt


Having using standard LR6 batteries in a Canon before you will only get 3 or 4 pics max before it drains the batteries. You really need high power AA's like 2300mAH+ rechargeables for any good performance or Lithium AA's ... Canon PowerShot A400 Digital Camera

I hit the power button and it turns green for a second but then goes out. The camera and LCD screen do nothing. So I have some sort of power problem. When I put the battery in the charger the charger light comes on for about a 10seconds but then goes out (suggesting that the battery is fully charged). Is this a battery problem (not charging or holding a charge) or a camera problem? I don't want to buy a new battery if the camera itself is dead... Thanks!


Hi i have struggled with this within few months of buying the camera.\015\012Both the charger and camera are not making a good connection with the battery. i clean with alcohol, this usually helps with the charger. When powering up in camera i ... Sony Cyber-shot DSC-W120 Digital Camera

Formatting problems I have a minolta dimage 2300 that I can't get it to format.I put a new compact flash card in the camera and the screen keeps reading not formated,so I went throught the steps to format it and it keeps freezing up on the final step which reads FORMAT ? YES NO OK ENTER I highlite yes an press the enter button and the camera just freezes up,I can't even turn it off I have to wait untill it goes off by itself in 3 minutes.Can you give me a hint of what I can do???


Try formatting the card on a computer than again on the camera. If you don't have success formatting the card with a computer than it is a pretty sure thing that there may be something wrong with the card. ... Konica Minolta DiMAGE 2300 Digital Camera

I just put brand new Lithium batteries in my samsung 630. Then I noticed the second lens is sitting a little crooked. I straightened that out but now when i turn on camera it comes on beeps twice and shuts off. Lens will not retract back into camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Samsung Digimax S630 Digital Camera

The Samsung BL103 digital camera won't turn on. I put new batteries in it and held the power button but just won't turn on. Then i started pressing all the buttons it still woudn't budge. What do i do? How can i fix it?


... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4184 seconds