Having problems with your Samsung S760 Digital Camera ?
My Samsung S760 doesn't shoot the flash, even though I have it on auto mode, low light and the flash sign appears on my screen. What can I do?
It could be the flash tube,, have you banged the camera ???
Repair Help & Product Troubleshooting for Samsung S760 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My Samsung S760 doesn't shoot the flash, even though I have it on auto mode, low light and the flash sign appears on my screen. What can I do?
It could be the flash tube,, have you banged the camera ??? ... Samsung S760 Digital Camera
I changed the batteries in my Power Shot A720 IS recently when the low battery warning flashed, and had taken only two photos when the warning flashed again. I moved the mode switch to playback and the screen went dark "Change batteries now" appeared. I turned off the camera, set the mode switch to shooting, turned the camera back on and was able to take two more photos before the low battery warning returned and prevented any more picture taking. I purchased and installed new batteries and f
Hi, 1st you must use alkline bat or minimum 800 mhp bat....and if problem is not solved then cheak the bat cap and connection clean with aomthing,,,,If any thing else contact [email protected] ... Canon PowerShot A720 IS Digital Camera
Hi, I have a Canon T2i Rebel. When i put the camera in "M" (totally manual), the image doesnt appear in the LCD screen. Everything else works fine in the monitor, but it is as if the lens where covered with the cap. But it´s not, and acutally all the other modes work fine. Only in the manual mode the image doesnt show, and the pictures also appear completely black. The menu shows sometimes something as if the exposure were less than -2, but even though i change the values for everything hig
That's great news, so let's write it up as a solution so that other people who search on here find the right information!So it appears that the Canon T2i when in manual mode (M) remembers whatever settings you play with, and that these se ... Canon EOS 550D Rebel T2i Digital Camera
I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the flash it wont let me change the settings of the flash at all. Apart from this the camera lens shutter seems to be sticking when i turn on the camera it doesnt always open i have tried cleaning the lens but it doesnt seem to make any difference!
I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the f ... Sony Cyber-shot DSC-W70 Digital Camera
My d90 flashes an err sign somtimes when i shoot at manual mode.. but when i change my apperture and shutter speed setting, it will not appear anymore. Even at auto mode sometimes it flashes an err. Does the d90 flashes an error when you made wrong setting in your apperture and shutter speed?
On page 256 of the D-90 user manual it says that an ERR message indicates a camera malfunction and that the malfunction can be cleared by releasing the shutter. I found that the only way I could release the shutter is to turn the camera off and back ... Nikon D90 Digital Camera with 18-105mm lens
Flash problems well i got my olympus stylus 710 a year ago and well now i am having problems with the flash itself. when i want the flash on, on the screen appears a blinking red flash sign.. -what does it mean? & -how can i fix it? background facts (i can take pictures when i turn the flash off, but when its on no pictures can be taken) HELLLLPPPP
Hey emeffem,\015\012 What is most likely causing this is that the flash is set to off which would be symbolized by a lightening bolt sign crossed out. Directions on how to turn it back on are on page 13 of your camer ... Olympus Stylus 710 Digital Camera
Canon SD 550-- sensor problem? Bought 3/2006 and have had no problems. Suddenly, LED screen went black--shows nothing and cannot take a picture altho will flash and record black picture. Shooting options do appear on screen when in picture-taking mode. Can see pictures that were taken previously, however, while showing them on TV screen, camera shuts off. Is this an expensive repair. Thanks.
The shutter of the camera is not opening that is why every picture taken is recorded black. It is a mechanical problem and probably has nothing to do with the sensor. Not very expensive ... Canon Digital Cameras
DSC-W70 The camera seems to work as it should however when I take a picture, the resulting image on the LCD screen is distorted. By this I mean that lines appear horizontally across the screen. The only time that it works well is when I take it out of normal mode and set it to Multi Burst. However with Multi Burst, the flash does not work.
Did you ever get this problem resolved? ... Sony Cyber-shot DSC-W70 Digital Camera
My Benq DC 3410 suddenly doesnt turn on but seemed to be in a semi-open mode..Its screen has a low light but doesnt charge anymore.Any idea how i might open it so i can completely turn it of. Your help is greatly anticipated.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\01 ... BenQ DC3410 Digital Camera
I have a sony cybershot DSC-T70 when I try to use the flash it doesn't work. When I touch the screen 4 options are supposed to come up and nothing appears except for the one that says no flash. I was thinking maybe it was in auto mode but how do you take that off because I was recently in vegas and I couldn't get the darn thing to work and in most of the pictures you can barely see the people I was taking a picture of
The flash icon will also be disabled if the camera is in burst or continous shooting mode-if possible restore camera to factory defaults and start from there-check in home menu under shooting and see what the settings are ... Digital Cameras
When I turn it on, the images don't appear on the screen. Everything else on the screen is fine (ex: when I go into menu, the menu appears normally on the screen, when I press the flash button, the flash appears on the screen...)But the images from the outside world don't. Instead, there's either just black, or fashing black and white.
Go to canon service, it's a common problem and they solve it free of charge ... Canon PowerShot A95 Digital Camera
The camera is a sony cybershot 5.1 megapixels. when reviewing previous pictures there is no problem but when in camera mode wth the lens cover open the image is opaque and lines appear across the screen. the battery is fully charged and there is plenty of spare capacity on the flash card
There is a problum with ccd imager ic so please go to your nearst sony service centre & fix this problum ... Sony Digital Cameras
My Minolta x31 camera has a fault. Cannot record a photo (black screen) can playback photos stored on SD card. Flash & monitor work as per normal.When in photo mode monitor is nearly black all over.Flash fires & appears to record photo. Nothing recorded.Please help
Sounds like the image sensor may be gone. You should check with Minolta for service or the vendor where purchased. ... Digital Cameras
Flash doesnt work..and with zooming it gives damaged emage..on the screen appear error91:01
... Sony Cyber-Shot DSC-F828 Digital Camera
I have a nikon d200. The last time I used it (only a few days ago) it was fine, everything normal. Then yesterday I pull out out of the case and everything seems to be going wrong. It is metering INSANELY low, like a shutter speed of 100 in full daylight produces a REALLY dark image. It won't auto focus at all, and i am unable to change the fstop in manual or aperture priority modes. I tried to restore it to factory settings and the lcd screen flashed to indicate it had been restored but no luck
Your boyfriend is probably right, and it makes sense, if you can't change the f-stops. \015\012The following blog on Flickr might help you:\015\012 ... Nikon D200 Body Only Digital Camera
SONY DSC T33 SCREEN STOPPING SHOWING. CLICK SONY DSC T33 SCREEN STOPPING SHOWING. CLICK BUTTON,FLASH WORKS AND IT APPEARS TO TAKE A PHOTO BUT NOTHING SHOWS. ALL ISONY DSC T33 SCREEN STOPPING SHOWING. CLICK BUTTON,FLASH WORKS AND IT APPEARS TO TAKE A PHOTO BUT NOTHING SHOWS. ALL I CAN VIEW IS OLDER PHOTOS TAKEN BEFORE THIS FAULT AROSE (without warning) WAS NOT DROPPED/ ABUSED OR ILL TREATED. NO MARKS/CRACKS ON SCREEN. ...
This is due to failure of ccd imager chip in your camera, replace ccd imager chip to get live view in lcd to take fresh pictures.Let me know if you need ccd imager chip part number. ... Sony Cyber-Shot DSC-T33 Digital Camera
White Screen Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white picture which can be deleted. The camera does not flash although flash is set to automatic and photo taken in a dark room. Camera flashes (weakly) with flash set to manual on. Lens is unobstructed and appears to be perfectly normal. Camera was not dropped. Batteries have been changed.
\015\012Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white pictur ... Pentax Optio E10 Digital Camera
Hi, im 14 and i got a Panasonic Lumix DMC-F3 camera for christmas and have had it for about 4 months, a few weeks ago a 1cm black dot appeared on the screen. It doesnt get bigger when i zoom in and doesnt go away even when i go to the cameras menu. today i went to turn it on and another black dot had appeared on the other side of the screen, there is also a thin black line going through the middle of the screen. i have tried cleaning the lens but it didnt make any difference. Please Help me i a
This is a faulty or damaged LCD screen. The fact that the pattern of dots and lines is unchanged by zooming and appears on the menu screen confirms it.The LCD cannot be repaired, it must be replaced. As long as the fault is not due to mis ... Panasonic Lumix DMC F3 Digital Camera
The flash no longer works. In "auto" and in either the "auto flash" mode or "forced flash" mode no flash occurs. It is not in "suppressed flash" in the "portrait" screen position mode. The batteries are good. The shutter button is pressed after the charging is completed. The camera is not in "continuous shooting."
Hi there, \012Well first of all try to reset your camera, remove the battery from your camera for 4 hours and then insert them again, it helps you to do a hard reset in your camera. if further you have the same problem then there mus ... Fuji FinePix 3800 Digital Camera
Horizontal Lines I found in my Canon PowerShot S 500, in the screen, the image appearing having horizontal lines in it, in the replay after imaging and replay mode, and after it is on the computer, the lines appear in the picture clearly pixelating the picture horizontaly, while in video mode, no lines appear at all while videoing and viewing the video. in the viewing mode normally before taking the picture, i found that there is very light lines cannot be seen easily, but became clear when i tr
Even am facing the same problem is it due to the problem mentioned in this site?\015\012\015\012http://www.canon-asia.com/index.jsp?fuseaction=image-phenomena_notice ... Canon PowerShot S500 IXUS 500 Digital Camera
When I turn my 550 PowerShot on, I get a blank screen (black for the most part with white camera symbology around the screen, such as the flash symbol, etc). The screen works, as I can click a picture and see the photo momentarily. I can also view my saved pics. When I select the film mode, the screen looks normal.......meaning it displays a color image of what is in the lens. Have I inadvertently selected a mode which is causing this phenomenon?
Think that you might have accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on ... Canon PowerShot A550 Digital Camera
My flash won't turn on for my iSonic digital video camera. The instructions say to press the "up" arrow on the camera in the capture mode. I do this, I hear a beep, the tint of the screen changes, but it doesn't flash in any mode. I either see a "no flash" symbol, or nothing, and either way it still doesn't flash.
... iSonic Snapbox DC-520 Digital Camera
Blank screen all the icons are present on the screen, but the rest is black and blank. tried taking shots but nothing appears on the screen. what is the problem. got this camera may 2008. i was taking pictures, and trying to do some color accent and all of a sudden, screen turned black even in auto mode and video cam mode.
Try this...if you can still get into the setup menu, scroll to "reset" and follow the on-screen instructions. If not, remove the memory card and battery...press all the buttons...leave the camera alone for 20 minutes...insert the card and then the ba ... Canon PowerShot SD750 / IXUS 75 Digital Camera
I was taking test photos around the house with my new camera and the flash won't fire properly (the flash pops up out of the camera but it makes little sparking sounds and flickering on and off). I've tried various modes including auto night etc but it won't stop flickering (just sparking sounds and a flickering flash like a light bulbs does just before it blows).also I have tried taking images using the basic auto mode in a low lit area and the flash pops up but does not fire.
I think top cover is faulty it s giveing error 05. if poop up and giving err99\015\012then flash pcb faulty other wise need to replace top cover. ... Canon EOS Rebel XSi Digital Camera
My camera doesnt' work indoors. i try to take a picture and it doesnt' take when I'm in AUTO mode. However, when I'm in LANDSCAPE mode the pic will take. it seems like the flash isn't active in AUTO mode. can you help. really apprecate it. dave
You must have a software glitch because the flash is supposed to be in the auto mode when the selector is in auto, unless you manually turn the flash off and the flash should go back to auto every time the camera is turned off and back on. Here's a w ... Canon PowerShot A720 IS Digital Camera