Having problems with your Samsung S760 Digital Camera ?

I have had my camera for a while now and all of a sudden it has just froze on me with the lens still out. It isnt the batteries because when I push the buttons the light still flashes on the cam. any help would be great cheers!



Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous interiors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particles that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Samsung S760 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have had my camera for a while now and all of a sudden it has just froze on me with the lens still out. It isnt the batteries because when I push the buttons the light still flashes on the cam. any help would be great cheers!


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Samsung S760 Digital Camera

Camera flash i generally use my camera on auto mode so i don't have to play around with buttons! however after loaning my camera to my sister for a week my flash is no longer as great as it was!! I used to take pics and the flash would light 2-3 times giving a great, bright picture. It now flashes once before the pic is snapped giving a dark picture. If i push the flash button on the left side of the scrolling circle it goes from red eye flash (which flashes once) to no flash! I'm almost certain


No worries, I think I can help you with this one.\015\012I believe that if you are using your Samsung Digimax in either "Auto" or "M" mode you will only have the options of "red eye flash" or "no flash". BUT HOWEVER, if you select the "Prog" mo ... Samsung Digimax S600 Digital Camera

After taking some pictures I wanted to delete them. Instead of hitting the MENU button I hit the SET button and a red light came on and was flashing. I pushed on the OFF button to shut the camera off. It would not shut off.So to shut the camera off I opened the battery door and the camera shut off. I went to turn the camera on and will not come on. I changed batteries still will not turn on. WHAT DO I DO??...JERRY


Hello Jerry, First make 100% certain that the battery is charged, also that you dont have a bad connection.The S2 has a small cell battery for storing the date/time ect under the battery flap, try removing and re-inserting it, but ... Canon PowerShot S2 IS Digital Camera

DSC-W200 Frozen My W200 has the lens open (extended) and will not close. Additionally, when I press the power button or the play button on the back, the LCD lights up and says Sony, but nothing else happens. I've tried connecting it to my macbook, using a fully charged battery, memory card vs no card, etc. Nothing seems to work. If I press the power button a seond time, the green power light goes off, but the LCD still says Sony. Any help would be greatly appreciated. Not too eager to send it


Try this it works for lens problems like you describe ]]] OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local gara ... Sony Cyber-shot DSC-W200 Digital Camera

I cleaned the contacts of camera and battery....the camera temp went on and closed...I pushed the on button 15 secs.and the camera opened...shut off...the green light still flashes when I push the on button. I am now going to the store to check out the batteries.


Hi,\015\012\015\012This camera takes an NP-60 battery and they retail for around $20. You can obtain generic replacements cheaper than this on the web if you shop around - there is a nice kit currently available ... Casio Exilim EX-S12 Digital Camera

When I turn my Nikon Coolpix S70 camera on it says battery exhausted. I thought that meant the battery was dead. I just charged it overnight & it now still says the same thing. I took the battery out & put it back in & now it doesn't say anything the yellow light just flashes. Any assistance would be great. Never been mishandled, dropped, etc. It's in great condition & stays in the case unless used.


Mine says the same thing I have the same camera what did you do? Did you ever get it fixed? ... Nikon COOLPIX S700 Digital Camera

My Canon 40D locks up when I click the shutter and the blue printer light next to the menu button is flashing. All the LCDs go blank and all functions stop working . Originally I was using a vertical grip and it still would not come on when I took the batteries out but after I detached the grip the camera did come back on . Now I'm not useing the grip and I still have take out the batteries and re-insert and turn back on camera to make function work again. Everything looks normal but the same th


... Canon EOS 40D Digital Camera

My daughter's camera will not turn on. When the power button is pushed the green light flashes on top and the screen shows a message of "lens error". The lens cover is open and the whole lens is zoomed out and will not go back in. Is this expensive to fix or would it be best to buy another camera?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... General Electric A735 Digital Camera

I'll push the power button and the little green light flashes it beeps and the lense comes out just a tiny bit but then in stops goes back in and beeps twice and it's still off. Is there and easy/comparatively easy way to fix this or is it time for a new camera?


First check the battery. Charge the battery to full condition or change with new battery and try to turn on your camera.Or you can put off all batteries and memory card, wait for a moment, then put in again and turn on your camera. ... Casio EXILIM 10.1-Megapixel Digital Camera - Red

I was trying to put in my password and it would not take the password and the key keeps flashing to tell me the trail camera is still locked. Now I can not even get the trail camera to start when I push the power button. It comes up with the dashes and immediately shuts down. I don't understand any of these problems and how do we get this corrected?


See "forgot password" above. Bushnell has a serious problem on their hands if they want to continue selling these cameras.\015\012\015\012They need a PIN # for each camera. ... Bushnell Trail Sentry 11-9200 Digital Camera

My Olympus FE-230 will turn on & the monitor will light up but will not display images or focus in on anything. I shot some pictures with flash (which still works), and all & then I plugged the camera up to my computer through the USB and I was able to view those pictures but yet the monitor remains lit up but blank. Can you help me with this? I would greatly appreciate your expertise. Thank You, Gil


Hi, first of all how long have you owned the camera and how long have you had the problem? Most likely it is an issue with the lcd or its connection.If its less then a year old you will want to have it serviced under warranty if not... If you are tec ... Olympus FE-230 Digital Camera

I have a moultrie game cam model # mfh-dgw-4.0 i put brand new batteries in and push the on button and my display doesnt come on, the only thing that comes on is the status light? what reason it stopped working after two great seasons with it. i had it stored in the house its amazing how it broke in the cabinet all by its self


There is a rotary function switch on this model. The contacts may get dusty and need to be cleaned. You may try electronic spray cleaner and turn the knob as you spray.\015\012\015\012Things don't usually break just sitting in a cabinet ... Moultrie GameSpy 4.0 Digital Camera Deluxe

Used Vivitar 70-200 zoom on my K200 Pentax. Nothing but aggravation since. Right now the 18-55 lens it came with is on but shutter button is stuck in down position and my flash wont pop up using the manual "up" button. When I look thru lens and push button, flashing "F" is the only thing there. Removed lens and button would move enough to "click" but would not come up. Put lens back on and nothing! Newbie in the extreme and ready to go back to my MX !!


The issue here is the manual mechinsm is in defect, Your going ot hate me but there is not much I can do over email but to tell you a local camera shop can take care fo this for cheap. Whats going on is the mechism is jammed most of these are spring ... Pentax K200D Digital Camera with 18-55mm lens

The flash has been working fine until last night when I tried to take a picture and the flash was set to auto. When I press the button the little red light beside the flash sign lights up, but the camera does not take the photo. When I set it to flash mode, it still won't take a photo. When I turn off the flash, then it does. What could be the problem? Is it in the settings?


If your batteries are weak, the flash will not have enough power to flash and will prevent a picture from being taken. ... Nikon Coolpix S210 Digital Camera

Broken Camera Well, I dropped my camera, and tada, it is messed up. It turns on, it takes pictures, but the only button that works is the on/off button and the button to take the pictures. http://www.walmart.com/catalog/product.do?product_id=5634183 is the camera, I've had it for 2 years, so the warranty is up. The setting I had it to before had no flash, so now I can't take pictures with flash. If I could get any help, that would be great!


One of the cables connecting to the other buttons probably came out of its socket. It needs to be opened up and checked 1st. Sometimes maybe there is a crack which needs to mended to restore the reset of the button. ... Kodak EasyShare One Digital Camera

My fuji s5100 camera flash light became stronger. when i tried to take a picture with a flash - it burned the picture by putting too much flash light on it. i have no idea how this happened suddently, and if anybody had this problem before and can tell me what to do in order to fix it it would be great. Yaniv


Does it do on the manual mode . have you fiddled with the EV controls. or the flash compensation control. do a reset and try again . ... Fuji FinePix S5100 Digital Camera

Hi Guys, I have a Nikon SB600 flash, problem is, sometimes it didn't fire. When I push the ready test button, flash don't fire up and the test button still lit. Hoping for your assistance on my problem. Thanks.


... Digital Cameras

Have a samsung camera that seems to be frozen. The lens is open but there is nothing on the screen. When pushing the power button the power light flashes, the camera makes a beep and the the power light flashes off. what can i do?


Hi, this happened to my Samsung ST500, it took me months to find out what was wrong with it!, i found out the it gets stuck when the lens is different or has dirt in the lens. \012\012I Got Mine working by clea ... Samsung DualView TL220 Digital Camera

Battery problem This morning I turned on my brand new Nikon Coolpix 5400 and got nothing on the screen. pushed some buttons and still nothing. Went to turn it off and it won't. The lens stays extended and the power light is still on. I don't know if maybe the batteries are so low they can't do anything, but I was under the impression that the camera had an indicator for the batteries really needing to be recharged. The low battery light was on last night, but I haven't seen need to be recharged


Some of these cameras go from "low" to "no" very quickly. The electronics are more sensitive to available voltage than the mechanicals and it doesn't take full voltage to keep an led lit or to retract the lens. But the cpu shuts down. I would have ex ... Nikon Coolpix 5400 Digital Camera

I have a canon 350d with a sigma autofocus 35-80 mm. when i shot against natural light or outdoors in good light i get error 99 i have cleaned the conctors but still same problem. if somone would now how to fix this i would be very greatful.


The manual says "Err 99" occurs due to the use of a non-canon lens which is most likely to be the cause of the problem since you are using a Sigma lens. Using a canon made lens will resolve this issue. Here's a screen shot from the manual ... Digital Cameras

Plz help my camera was working fine then after a few days i turned it on and it wounldn't work then i replaced the batteries. when i turn it on the red light flashes then the green light flashes and then it stops and nothing happens after that. i tried pushing all of the buttons but nothing happens plz help me !


Remove the SD Card and the batteries. Wait for half an hour and then insert two new batteries. Do not put the SD card in as yet. (Waiting for half an hour or more allows the camera to reset itself).Now try switching on and good luck. ... Kodak EasyShare C653 Digital Camera

My CoolPix L10 camera display will not turn on - it sometimes will work as a video recorder, but I cannot get the display to come one. A red light just above the menu button will flash and then go off and the on light flashes. The camera is only about a year old and used to work great. Please help!


Change the battery..........................................sodeep ... Nikon COOLPIX L10 Digital Camera

I have an olympus 'mju' 700 camera which uses li-ion 42b battery and a li-40c charger. Whenever i charge my batteries, the charging light would start flashing (which is not the sign of charging because the light should be still) and when this happens, the battery would not charge. The only way i could make my battery charge was to slot the battery in the charger whilst the power is on (usually, i slot the battery in then turn on the power). But i was using my batteries on a day out, 2 days aft


... Olympus Digital Cameras

Hi, my Mustek dig. camera is not displaying anything. Having bought this about a year ago and not really using it, I don't remember if it came with a charger or just the USB cable. Anyway, I plugged in the USB cable and turned on the cam, but nothing popped out on my PC. The power button is still on (blue light) and does not turn off. But I still can not see anything - the cam is dark. Please let me know how I can start using it again. Thank you


Hi,\015\012Just tap on the sides of camera when you switch on it . There is definitely a loose contact between the screen and circuit board inside it . You confirm it to check that you are facing this problem due to bad connector . If you still ... Digital Cameras

Sony Cyber-shot DSC-H10 No flash happening for me and when I push the flash button I get a yellow caution with the exclaimation mark stating that "flash setting cannot be changed" and when I do take a picture I can hear clicking going on in the camera which I assume is the flash. I have manually lifted the flash and there is still not a flash going on. Please help....Donna


Certain camera settings can not use the flash. You need to change the camera to another setting and turn the flash on. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2523 seconds