Having problems with your Samsung S860 Digital Camera ?

Where is copy on the 2860 menu is it under rocording, sound,display, or settings??


Answers :

Settings, file or gallary, move 0r copy!!
\015\012
\015\012tanx
Repair Help & Product Troubleshooting for Samsung S860 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Where is copy on the 2860 menu is it under rocording, sound,display, or settings??


Settings, file or gallary, move 0r copy!!\015\012\015\012tanx ... Samsung S860 Digital Camera

Trail sentry HI People; I have a 11-9000C and after setting it up I get the 0 then I'm waiting on the first shot to see if the camera is working. In about one minute the display shows SLP then shuts down. I can push the menu button and it come back to 0 setting like the beginning. Have you ever seen this before? Thanks Laurent


The SLP stands for sleep mode make sure that you have a san disk memory card this card is what you should use in a bushnell trail camera.Do not go above what gig they tell you in your manual,try a set of new copper top alkaline duraclells.If your mem ... Bushnell 11-9000 Digital Camera

I'm trying to shoot HDR photos using my XSi/450D. From the menu two I've set the AEB EV step range as 0, -2 and 2. From here, though, I don't know what to do. If I go directly from the menu to shooting, I don't get any automatic shots, but rather single, individual shots based on the current exposure settings. Help. I've scanned my 45D manual, DVD tutorial, etc. and cannot find my missing step to create a series of AEB shots. Many Thanks, Robert


... Canon Digital Cameras

I am not able to copy pictures on to my PC despite attaching camera to PC with cable . in the set up menu i have already fixed PC, but there is no response


Use a card reader ... Digital Cameras

I need to know how to find the set up menu in this kind of camera or the copy button. I want to transfer pictures from internal memory to memory stick


Full instructions are in the "Using the Setup Menu" section of the manual, beginning on page 72. The "Copy to Card" option is described ... Polaroid i1237 Digital Camera

Can't get to set up menu with my new memory card in camera to set it up to use the memory card instead of the internal memory. Camera keeps saying memory card needs formatted-continue or cancel-I go to continue-it says formatting then goes back to saying memory card needs formatted-continue or cancel and around and around...camera will go to set up menu without memory card in.


1. with no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory.\0122. insert the card and do the "format" thing again from the menu as you just did for the internal memory. ... Kodak EasyShare C743 Digital Camera

Reset option and clean sensor option are not visible in set up menu. Canon D20 I had a two spots that kept appearing in the same area of the photo so I looked at the manual and did the clean sensor function a couple of times and the spots remain. I had also done a reset all functions since my stepson gave me the camera and I wanted to restore it to its original settings. Now I don't see either the clean sensor option or the reset in the set up menu. Help!


First of all - great camera! Check out http://www.dpreview.com/reviews/canoneos20d/ for a lot more information on the functionality. The sensor clean functio ... Canon Digital Cameras

I am using an Olympus E-500. and am trying to use the built in flash, set to one eight or to one sixty fourth of normal output, to trigger an external flash unit. The camera is set to "Vivid", manual, auto focus, and iso 100. From the "manual flash" menu I should be able to select either full, 1/4. 1/16 or 1/64 of the output. However, those choices never light up. I keep cycling through the first two lines of the menu and never reach the third line with the light output options I want. P


You should consult a Professional Photographer / Cameraman or contact the Customer Care of the Company. ... Digital Cameras

I can not set the self timer. In the manual it says hit menue button go to "self timer" select the secons and shot hit "set" hit menu, hit shutter button fully. When I do this the Timer lamp doesn't flash.. no flashing at all.. it takes the picture right away!


The self timer will not work in the "Easy" mode (icon with a heart in it) or in movie mode. According to the chart in the back of the manual, the self timer should work with all other modes. ... Canon Powershot SX110 IS Digital Camera 9.0MP

So...I want to connect my Casio Ex-s5 to my PC. The manual instructions say: turn on the camera, press Menu, then set-up tab. I don't see a set-up tab, only an "easy menu" with 5 optinos (FLash, self-timer, image size, etc). Where is the setup tab?


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Casio Exilim EX-S500 Digital Camera

Hi! I have a Canon IXY 30S. The menu was set in Japanese language. How can I set the menu to English? I don't know how to read Japanese characters. Thank you.


... Digital Cameras

Each time I switch my Casio Exilim ex-fc100 camera on, the set time and date menu appears and my previous setting are lost (like photo resolution, flash setting and so on) like it is re-set everything. This happens even if I do not remove the battery. Can you help me, please? Max [email protected]


... Casio EXILIM EX-FC100 Digital Camera

The flash on my Nikon D3000 won't pop up (regardless of the setting) and when I go into "Shoot" (from the guide menue) and then into "Easy Operation" the camera is set at No Flash but I'm not given the option to change the setting and says "The camera is now on "Auto No Flash Mode" but doesn't give me an option to change the setting there either. Can you help?


... Nikon D3000 Digital Camera

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do


The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

Over exposure The exposure settings on the camera have suddenly become fixed - I can't change them either through fixing shutter speed, OEV, or any other settings. Even tried a factory reset by selecting 'initialize' from the menu, but the problem persists. High or low exposure settings are visible on the viewfinder (i.e. changing the settings shows the picture getting darker or lighter on the screen), but once the picture is shot, it's fixed at an overexposed state.


... Sony Cyber-Shot DSC-HX7V Digital Camera

Settings Is there a way to set my camera back to the original settings. My kids were playing around with it and now when I go to take a picture it is all fuzzy and distorted. I have tried in the menu but wonder if there is a reset button to do this. Thanks for the help


First check to make sure the kids fingerprints are not all over the lens. If the lens is clean, then your kids are probably not at fault. This really sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, incl ... Canon PowerShot A300 Digital Camera

The camera when switched on displays in the top lcd display 'Err' yet shows battery as fully charged. ive reformatted my memory card via pc. changed the lithium cr 123a batteries for new ones. fully charged the 4 x AA batteries. the aperture ring lock is set to 22 on the 28mm-80mm af nikkor d lens. i have it set to af and auto but have tried all other camera setting i can access. it will focus no problem yet will not allow me to do anything else. i cannot access the menu eg func, play, in


Hi.Err means that the camera is in fault mode. There is no code, so that the fault is generic. This kind of error is often associated with shutter problems or other loens error. If you have a spare lens, remove battery and test the spare ... Fuji FinePix S1 Pro Digital Camera

Menu settings Do the picture adjustment settings affect the noise level of photographs, and if I post process should I use the 'softer' setting to minimise noise?


The noise occurs when your camera has to shoot in low light at a higher ISO setting. For the quality of photos this camera gives out, the noise isn't really much of a consideration unless you're planning to try to blow it up beyond 8x10. Softer setti ... Panasonic Lumix DMC-FZ5 Digital Camera

RE: PhotofunStudio 5.1 HD Edition Ver.5.01 L130 Panasonic camera TZ 10 I want to copy pictures from PhotofunStudio to camera. I did folowing : output - copy to media - still picture - next - select copy distination drive - removeable drive (F : ) - next - then a window pops up with : "Write- protect is set for the media. Cancel- write protect - press OK " I do this, and nothing happen - do it again, and the same window pops up. The program seems to stop here. What is wrong?? The cam


... Panasonic LUMIX DMCZS7 DMCTZ10 Digital Camera

The Coolpix L4 forget its date-time settings, and there is no way to set them. menu -> set up (ok)-> date (ok)-> date (ok)-> ... the result is "Time Zone" setup screen not the date.


Hi.\015\012\015\012\015\012Nikon cool pix settings are saved into an internal memory (20 MB EEPROM I think). \015\012\015\012\015\012The internal memory is kept alive by an internal rechargeable battery, that is r ... Nikon COOLPIX L4 Digital Camera

What is the proper sequence in setting up self Timer I lost my instruction book. I never used timer in the past; I have a cannon power shot A560. I go to menu and scroll to timer set 10 sec and 2 shots. push set button. what now?


First you press the self timer button. Then press the shutter button to start the timer.\015\012You can download the manual under the guides and manuals section at this link: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fc ... Canon PowerShot A560 Digital Camera

I have a Sony cybershot DSC-W200 12.1 megapixels. It has been working brilliantly, then i turned it on one day and it will not allow me to change any of its settings, even in the manual setting. In auto i can not use flash or micro settings. What has happened and how can i change it back? I have searched through all of its menues and i cant find anything that helps.


Take out the battery and let sit for 10 minutes. reinstall battery and turn back on. everything should be back to normal ... Sony Cybershot DSC-T200 Digital Camera

Sony DSC-S700 when turned on sometimes the screen is blurry and pink toned with blurry grey lines running accross the screen. Photos turn out the same. Happens intermittently. Have changed batteries, checked to ensure the dial on the top was centered on Auto Adjustment setting. Doesn't matter what setting display looks the same: pink and blurry with the lines. Checked all the settings in the menu. Not sure why it does this...worried it may be a board problem.


Hi there some how your camera LCD pressed by out side & the screen is damages. That's why you get the lines. Specially its come some particular area in the LCD screen. Just the way of resolve is resolve the LCD screen. Thanks & waiting for yo ... Sony Cyber-shot DSC-S700 Digital Camera

I have just bought the Kodak M381 camera and when I set the date and time and click ok, the time is set but does not display on the LCD screen at any point, so when I review my pictures there is no way of knowing when I took them. You can date the pictures retrospectively but that takes time and will be incredibly tedious and you soon forget. In the manual it says to select the date time stamp but I am unable to find it in my set up menu and I'm beginning to think this camera does not have this


I had the same problem. I think the camera does not have this feature, to bad it was a nice camera ... Digital Cameras

On my FinePix s3100, cannot transfer picture from camera to computer. After setting the Usb Mode setting in the Setup menu, it reverts to picture read screen. Recent problem - all other settings are fine. Any suggestions - Thanks


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Fuji FinePix S3100 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0804 seconds