Having problems with your Sanyo VPC-S880 Digital Camera ?
Turn my camera on a message comes on the screen protected card
Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.
Repair Help & Product Troubleshooting for Sanyo VPC-S880 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
The cover on the battery and SD card opening on the camera broke off and couldn't be found on the ground. A small piece of cover and the hinge are still on the camera. When the camera is turned on a message 'card cover open' comes on screen and though I made a temporary cover with a thin piece of wooden pop stick and another with some stiff card and taped them on the camera still came up with same message. Can I get a new cover/door or what can I do??
I imagine the only way to obtain a proper part is to send it to an approved Olympus service centre, hopefully under warranty (though I expect they would not regard this as covered).The camera must have some way of telling that the door is ... Olympus FE-240 Digital Camera
Turn my camera on a message comes on the screen protected card
Look at your memory card. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper posit ... Sanyo VPC-S880 Digital Camera
Upon turning on my camera the message 'lens error restart camera' appears against black screen. I've turned off the camera and have tried turning on again. Still same message. Prior to the above message, my camera displayed a message 'memory card error card locked' and I was not able to see view my photos. I took out the card to see if it was in a locked position to which it was not. Please help as I have vacation photos on this memory card!
Can't help with the camera- sounds like it has a fault.The photos, however, should be recoverable by putting the memory card into a card reader on a computer. ... Canon PowerShot SD1000 Digital Camera
My panasonic lumix dmc-fx01 has stopped working, When I turn it on, the viewing screen comes on, I see screen and menus, but the scrolling button doesn't work to select, the zoom doesn't work and shoot button doesn't work. When I have camera in play mode and in video mode the screen displays this message: memory card error please check card This happened before, I took it to be repaired and it cost 90 euro to have a bit of dust removed
Navigate to this page ..>Panasonic Lumix Dmc-Fx01 service manual and go to page #20 Disassembly and Assembly ... Panasonic Digital Cameras
I own a Kodak V530. It won't accept the memory card. The LCD screen says memory card requires formatting. What can I do to get it to work with memory cards. This message come on the LCD screen when I turn on the camera.
What you need to do to get the card to work is you need to formate it to your camera. On the link below on page 4 tells you how to formate to your computer.\015\012\015\012 ... Kodak Digital Cameras
Write Protect I own an olympus Camedia D-390 and use an xd picture card (16mb) recently I tried to take a picture but when I slid back the cover it comes up with the error message "Write Protect" I have looked in the manual and all it says it that my cameras write protect feature has been enabled by a pc; connect it to a pc and turn this off. Just one problem....How??? I have trid connecting it tothe pc and changing the attributes of the folders;but everytime I take off the "read only setting
What should i do? would u mine pls to teach me sir? ... Olympus Camedia D-390 Digital Camera
I have a Panasonic DMC-FX12 digital camera. Before I left on vacation, I took all the pictures OFF of the camera and recharged the battery. I took only 4 pictures before the error message "Built in Memory Card Full" came on the screen and refused to allow me to take any more pictures. HELP! A secondary problem I am having with the same camera is that I have to turn the ON/OFF switch on and off several times before the lens finally comes out.
You copied all your pictures, but they still exist on the memory card. You need to go into the menu and erase the pictures. As far as the lens not coming out, there may be some dirt in the mechanism. ... Digital Cameras
Memory card when i turn on the camera it comes up with this message 'This memory card is protected.' How to I 'unprotect it?
Hey... I just figured it out. I have had the same problem and just figured it out. On the memory card itself, there is a lock option. You need to unlock the memory card itself. Good luck!!! ... Panasonic Lumix DMC-LZ3 Digital Camera
The message on the screen of my camera says CARD PROTECTED .i cannot take photos or delete any . Also the memory card will not come out of slot
Card protected usually means the slide switch on the side of the card is in the locked position. To get the card out of most cameras (since you didn't say what your camera is) you press in on the card and it pops out. Sometimes there is a button alon ... Digital Cameras
When I turn the camera on I get the message "memory card error". The only button on the camera which then works is the menu button but it just brings up the screen and then the same error message. Yes, I have replaced the memory card and the first memory card works in our other camera so it is not a problem with the card. My computer also fails to recognise the camera when I connect it via the usb port. Any bright ideas?
You need to format the card in the camera. Go into the menu and scroll to "format" and follow the on-screen instructions. This will erase and initialize the card . To download pictures, the most trouble-free way is to use a card reader and download t ... Pentax Optio S4i Digital Camera
Hi. Last time I went to used my camera the screen showed a message saying the memory card was damaged. When I tok it out I saw that it was slightly damaged on the bottom strip. I have replaced it with another memory card but the same message keeps coming up so I cannot take any photos.The message says: "This memory card cannot be used. Card may be damaged. Insert another card." Any suggestions how I can reset the camera before I pay to put it in for a service?
It is possible that there are bits of the damaged pieces struck inside the card reader contacts in the camera.\012So if you can remove the battery and memory card and tap upside down ,you might be able to retrieve the broken pieces.\012us ... Nikon D40x Digital Camera
Digital camera about 4 years old, take pics, they are on screen when reviewed, but when I put SD card in computer they do not come on the computer. Couple of days later, took more pics, put SD card in computer, they did not come on the computer, but the previous days pics came up. What is the problem? Tried connecting camera to computer via cable, turned camera & computer off to reboot, removed and reinstalled SD card, changed camera settings, still have a problem. I have done this procedu
Possible that the SD card is having errors, So take a scan on the card and confirm. Also check the card on another PC to confirm if there are images on the card. If not there can be errrors in the camera. It will be ideal to have another SD card ( bo ... Panasonic Lumix DMC-LZ3 Digital Camera
We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(
Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera
Stylus 600. When I turn camera on a blue screen comes up with a message [xD] Write Protect. What does this mean and how do I make it go away?
In order to remove the message of write protect you will need to format the xD memory card. The card has somehow become corrupted. To format the memory card - press Ok - right arrow to Mode Menu - down arrow to Card tab - right arrow to Card Setup ... Olympus Digital Cameras
I have a canon powershot A470 and it fell in water. after i removed the card and batteries of which still worked and neither were wet, i let the camera dry for a couple of days. it has turned on since and the screen would come on and show me the pics on the card but it kept turning itself off and the zoom lense would go in and out on it's own. now, i can't get the camera to turn on and the zoom lense it stuck. any ideas??? or should i call it a wash. i really love this camera!!! Theresa
I submerged my powershot for a couple of seconds. it did get completely wet. it was acting very strangely: the lcd wasn't working, the little orange light on the front kept flashing, and it took a few tries for the lens to extend.then ... Canon PowerShot A470 Digital Camera
When I put a memory card in my camera its says it needs formating, so I push continue to format and it comes up with the message read only memory card remove write protection to capture or write to card. The switch on the memory card is in the right position. I think something is wrong with the camera, I installed a brand new memory card and got the same message.
Is this a different manufacturer than your\015\012other cards? Is it formatted correctly (e.g., FAT16 instead of FAT32)?\015\012Otherwise, not all cards are compatible with all cameras. There are\015\012subtle differences in the IDE drive ... Kodak EasyShare Z740 Digital Camera
I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju
Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera
Format error I have a Samsung digimax A40 camera. I 've just purchased a Lexar 4gb SDHC card. When I've tried to format the card for use, the screen comes up initially with "card error", then a screen to format - yes/no. When I press on yes, it takes a few moments and then comes up with Format Error, and turns itself off. Any suggestions on how to overcome this? We are heading away on holiday soon and wanted a bigger sd card as I currently only have a 256mb card in it. Thanks, Tracey.
I don't believe the camera can handle a card of that size. I believe the camera only supports up to 512MB cards, anything above that is not guaranteed. \015\012\015\012 ... Samsung Digimax A40 Digital Camera
When I put my new SD card into my camera a screen comes up to format. I hit yes,but a message come up that there is a "problem with the memory card". I put the same card into my laptop and can put photos on to it etc. Why is my camera rejecting this card.?
Hi. This could be a common issue with digital camera. Try to format the card using your laptop computer and put the card back in to the camera. ... Digital Cameras
I dropped my camera. In the off position, the lens stays open and projected. Then turning to the on position the lens goes in, then out again. Then I receive the message "Please turn camera off and then on again." Before receiving this message, the screen looks normal, as if it will work, but then the message comes up. I took the battery out to try to reset, but no change. Any suggestioins?
HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will need to ... Panasonic Lumix DMC-FX8 Digital Camera
I have a Minolta Dimage 7Hi and get a 'card error' message when I turn it on, in the middle of the viewing screen. The camera acts like it takes a picture without the button being pressed, then the red light next to the card goes on and off for about 10 seconds. Then the camera shuts down. It repeats this when I turn the camera back on and doesn't respond to any other settings or button pressings. Can you help?
Format CF memory card to FAT16 - 7hi does not recognize FAT32 nor NTFS ... Konica Minolta DiMAGE 7Hi Digital Camera
Hey. my camera will turn on and take pictures and everything but the screen will not come on. It is completely black! I put in my sd card in another camera to see if my camera had been taking pictures and it was, it's just the screen that won't turn on.
The screen is bad ... Nikon COOLPIX S52 Digital Camera
When I turn the camera( Nikon coolplex L1 ) a notice comes up that says "this card cannot be used" This is the same card I've been using that has worked well until now. My camera is just over 2 years old. I put another card in and it comes up with the same message.
I have the EXACT same problem and my camera is too, just over two years old. What did you do to fix it? ... Digital Cameras
When I turn my camera on it says "Access" then a message comes up that tells me to "turn the camera off and then on" I have tried this many times and all the camera does is continue to push the lens in and out and then tells me to "turn camera off then on" Problem will not go away. Fully charged battery, took battery and memory card out for a while and re-inserted both and have same problem. [DSC-W55
This is a firmware problem that is common with many many digital cameras. It will have to be upgraded. The company will do this for $50Otherwise you may be able to find a kit online and do it which would be hard to located ... Sony Cyber-shot DSC-W55 Digital Camera
Frame error Turn on and take photo and then a message comes up saying "frame error" and then Even shutting the camera off. When turning it back on it still says "frame error" . When you take several photos you only end up with a very few on the memory card. What is the problem and how can i fix it? I cant view any of the photos. I replace camera with a new battery. Could it be my SMART CARD. Need help! Fuji MX-2900
... Fuji MX-2900 Zoom Digital Camera