Having problems with your Sanyo Xacti VPC-T700 Digital Camera ?

Computer will not recognize memory card

\015 I have tried two different SD memory cards, I can download from internal memory, but the memory cards are not recognized. Any ideas how to correct this?\015

Answers :

Check two things and let me know how it goes.
\015\0121) Are you putting the SD card from your camera into a slot on your laptop, or pc? Or are you putting it into a card reader?
\015\0122) Are you sure the switch on your card is in the unlocked position? Let me know if any of these doesn't work.
Repair Help & Product Troubleshooting for Sanyo Xacti VPC-T700 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello, I have a Kodak EasyShare C813 digital camera that is not recognized by my computer. The memory card is also not recognized by my printer. Now it gets confusing. If I take some pictures with the C813 then take the card out of it and put it in my M530, connect it to my printer with a USB cable I get all the pictures off of it. Every solution some very kind people have suggested assumes the C813 is recognized by my computer or printer but that's not the case. The C813 was working j

Please un-install the driver software from your PC , then reinstall the driver or by connecting the camera to the PC to be detected as a new hardware and subsequently installed. If this is not the case then it is for sure th ... Kodak Easyshare C813 Digital Camera

Pictures show up on memory card in camera, but computer won't recognize the card - either inserted directly or by USB

ALTERNATE WAY TO TRANSFER PHOTOS TO COMPUTER If your photos are stored on the memory card, then remove the memory card from the camera and insert it into an USB memory card reader. Connect this USB memory card reader and memory card into the USB ... Nikon D40 Digital Camera with 18-135mm lens

Memory card I have a sandisk memeory card I use that is 1gb ultra and i can put that in my computer and it pulls it up right away. But when I use a 4gb or 8gb I can take the pictures but my computer will not pull pictures up or recognize the disk. Is there only certain sizes I should use in my 1285 camera? Once I saw my camera say does not recognize that format? All the san disks I have are brand new as well.

I have looked at the specs for your camera and you should be ok, if you are using SD or SDHC memory cards. As far as the computer you are using to read the cards, not enough info. to comment on that. One possible way to see your pictures on the 4gb ... Kodak EASYSHARE Z1285 Digital Camera

Can't download photos to computer If I use cable that came with camera or take memory card out and try to download with memory card holder computer doesn't recognize it anymore

Use the card on a different computer. Or connect camera to a different computer. May work there. If it works, then attach to your computer after download and format the card. Will work with your computer as well. ... Kodak EasyShare DX7590 Digital Camera

I'm unable to transfer pictures from my Dane-Elec SDHC 4gb memory card to the computer. It worked in December 2010, but isn't working now; my computer won't recognize the card. I have a Kodak Easy Share camera, and it's not the camera that's the problem because I removed the card, took a picture, and was able to transfer that picture to the computer. How I can transfer the pictures?

Hi,Here is a tip that I wrote about how to find the\012manuals, drivers, downloads and support for Digital\012Cameras.Digital\012Cam ... Digital Cameras

Took pictures with Olympus Stylist 710, saved to a FujiFilm xD (512MB) memory card. Went to transfer pictures from memory card using Sabrent USB card reader, Mac computer did not recognize card. Now the card does not read in the camera.

It is possible that the memory card was damaged. This would be by coincidence. Just in case only the formatting is damaged you can try to format the memory card. \015\012\015\012As far as reading the card is concerned, if the ... Olympus Digital Cameras

My computers are not recognizing the camera is hooked up with the cable, and thus I can't get the pictures off the camera. I can use a card reader for the ones saved to the memory card, but how do I get the picture saved directly to the camera memory off the camera?

I don't know how to save the pictures onto the memory card maybe in your settings you can change it to external memory or something and your USB cable is probibly stuffed up so you'll have to get a new USB cable goodluck ;) and please rate this solu ... Panasonic Lumix DMC-TZ1 Digital Camera

There are pictures in the camera but my computer says the file is empty. How can I get my computer to recognize the contents of the memory card. It recognizes that the camera is connected.

Reinstall the software for the camera ,then try again if not purchase a card reader ... Sony Cyber-shot DSC-W130 Digital Camera

Camera will not recognize memory card; it did 1 day and then not the next; the memory card works fine connected to a computer

Hi.Ensure that the card is not bigger than 2GB. The Optio does not accept SD cards bigger than 2GB. If card is bigger than that, when you say that one day the card has been accept, the camera may had been working with internal memory rath ... Pentax Optio M10 Digital Camera

Camera: Nikon Coolpix E4600 Have tried to transfer images from my Coolpix camera to my computer. Once connected to USB cord, the camera is recognized by the computer except the file transfering programs (Nikon Transfer and PictureProject) don't recognize any files to transfer. Is it a problem with the cord itself? I've put the memory card which has the pictures into my laptop and transfered them successfully that way, which is why it leads me to believe the cord is the issue.

... Digital Cameras

Is it true that i have to sync the memory card in my camera for first time? i could take pictures with no problem but when i want to insert the memory card in my computer it does not recognize it. it say that there is an error. and then i do not know how to do it because i do not have the manual for my camera. my camera is kodak retinar aspheric.

... Digital Cameras

My computer doesn't recognize my olympus stylus 8010. Will a card reader alone solve this problem, or do I also need a memory card for the camera? Can I change the setup on the camera so the computer views it as a hard drive/memory stick? Thanks...

In order to use a card reader, you must have a card to insert into it. If you've been using the camera without a card, you've been saving the pictures to the camera's internal memory. In order to get at those, you need to copy them to a memory card f ... Olympus STYLUS TOUGH 8010 Digital Camera

I'm unable to load pictures onto my computer even if I take the memory card out and put it into a card-reader. The camera recognizes that there is the camera hooked up, since it charges it, but an icon does /not/ show up on the computer. I have a M340 EasyShare, and need some help.

Might not want to hear this, but you need the Kodak Easyshare software to download pictures from the camera to your pc. I have found no other way to do it without their software. ... Kodak EASYSHARE M340 Digital Camera

I posted yesterday - no luck - $50 pd through Paypal to the first person that SOLVES my problem - getting a memory card error on 2GB Simpletech card after using on Canon Power Shot SX200. Card is not locked and I have already ran 3 different recovery softwares on it. Computer recognizes card in drive, but when I try to open it prompts me to enter card.

Hello\015\012\015\012\015\012Have you attempted to connect the card directly to the computer VIA a card reader?\015\012\015\012\015\012Also which recovery programs have you tried? Is FileScavenger one of them? ... Digital Cameras

Computer will not recognize memory card

Check two things and let me know how it goes.\015\012\015\0121) Are you putting the SD card from your camera into a slot on your laptop, or pc? Or are you putting it into a card reader? \015\0122) Are you sure the switch on your car ... Sanyo Xacti VPC-T700 Digital Camera

CANNOT DOWNLOAD I have my daughters camera and it has pictures stored in the camera memory. I connected the camera to my computer with a usb , but the only thing that happens is that the usb symbol appears in the camera frame and my computer does not recognize any software. I am use to my regular digital having an immediate pop up on my computer that states you have photos to download. I preceeded to add the digital card from my camera to my daughters camera to see if I could download the photos

There is no software for the computer to recognize and it will not download to your computer automatically. This is what you do:\015\012After connecting the usb cable from the camera to your computer, go into my computer and look for the drive, it wi ... Vtech Kidizoom Digital Camera

Hello. I'm trying to install my pictures from my camera to computer. I've never had problems in the past, but now it's saying "camera is not recognized". I've tried unplugging the usb cord, turning the camera and computer on and off, reinstalling the program, changing the batteries, putting the memory card directly into the computer (which does not pull up any options or do anything). Please help! Thanks in advance.

Time to start using a card reader for downloads. ... Canon PowerShot A530 Digital Camera

I have Lumix Panasonic DMC-T25, I downloaded my pictures off the memory card onto my computer using the mobileLite Memory card reader. Once I downloaded the pictures, I deleted them from the memory card using my computer. Now when I insert the memory card into my camera it is coming up memory card error. Thinking it my be the memory card, I went out and bought a new memory card, inserted into the camera and still getting memory card error. How do I fix this problem? It has to be something wi

... Digital Cameras

Videos play on camera, not on computer. Why? How to fix? I took SD memory card out of camera, plugged into computer, copied direct to computer. The video files never play. the Intelli software required to transfer and convert video files to make them work properly? I changed form Windows XP computer to a new Windows 8 computer. Also, a separate issue on another SD memory card, copying SD memory card to computer, many files not recognizable, can't locate. Might be problem with that SD card. This

... Samsung PL200 Digital Camera

I have just upgraded memory stick using a memory stick adapter with a 2gig card and now my computer wont recognize my DSC-P52. do i need to change anything

Format your new card using your camera.Thanks for using Fixya! ... Sony Cyber-Shot DSC-P52 Digital Camera

The camera reads disc full. When I go to load the pictures onto the computer it only shows the 4 pictures from internal memory. It does not recognize the memory card at all.

You need to get rid of the pics in the internal memory. With no card in the camera, go into the menu and find "format" and follow the on-screen instructions. After that, your card should work properly. ... Digital Cameras

My computer doesn't recognize my dmc-zs1 videos that I download from my memory card. Is there a way to convert them to play on my computer?

Hi Rosebud, Your camera takes videos in the "Quicktime" format. You do not need to convert the videos (unless you want to play them on another device) to view them on your computer. All that is needed is a player that can read that file f ... Digital Cameras

Im trying to import videos from my mini dv tape on my digital Video camera JVC GR-290u i plugged in a usb cord from my camera to the computer but nothing came up. when i switch from video mode to memory mode my computer recognizes the camera and i can import photos from the sd card. but i cant find out how to import video from the tape.

As it's a DV (Digital Video) camera you should use the IEEE 1394 Firewire socket if it has one. Then use a DV capture program.If you dont have a Firewire port on your PC you can buy a card like this one which will connect you Camera to your PC. ... Digital Cameras

I am trying to copy JPG picture files stored on my computer onto a 2GB memory card. When I put the card in my Canon PowerShot D10, and connect the camera to the computer, I can copy or remove pictures FROM the card, but I cannot add or copy pictures TO the card (the "Copy to Folder" box is greyed out and unavailable). Also, I have tried connecting the same memory card to a Dynex Memory Card Writer/Reader. This does allow me to copy pictures from my computer to the card, BUT, when I go to v

Hi\015\012\015\012\015\012The pictures need to be in the appropriate folder inside the card (the same folder where the pictures go to), also the pictures need to be the same type as what you have taken with the camera.\015\012\015\0 ... Canon PowerShot D10 Digital Camera

Memory card Our old memory card stopped working in the camera. It said "memory card error". I bought a new card, 8gb duracell sdhc card, and when I put it in it said"memory card error" again. I tried formatting the card but it would not allow me to. I put the card in my computer and the new one works fine. I gave the old card to my brother in law to look at it, but he is on vacation, so I can't test it in my computer. I put the card that came with the camera in and it works fine, but it is a mmc

Unfortunately, the A520 does not support SD memory cards with more than 2GB capacity, and doesn't support SDHC at all. (1GB max for MMC cards.) I know memory is much cheaper than when the camera first came out, but in 2005 2GB was about as large as y ... Canon PowerShot A520 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2030 seconds