Having problems with your Sanyo Xacti VPC-T700 Digital Camera ?

Can not connect camera on to computor

\015 When I try it shuts down my computor and when i turn camera off my computor comes back up ...\015

Answers :

I would make sure I had enough system resources to run the program check to make sure you aren't having a problem with the driver for the camera software it may need updating in order to properly work. you can uninstall the provided software and reinstall it. Also try connecting the camera before you turn on computer (NHW) should recognize and notify you that new hardware has been found have your disk ready and let your new hardware wizard guide you through the rest of setup. you can always ask me to further assist you good luck and much success.\015\012\015\012wutxtye0rjd9d9ekmodqt1eoxkvn9hr9qjz1l3dabggyud7sdgr36czsrfxqenadhnijx9nfayi+sz1sug0aaaaasuvork5cyii=
Repair Help & Product Troubleshooting for Sanyo Xacti VPC-T700 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Transfer problems my camera is connected to my computor via the usb cable but nothing at all happens ie just as if its not connected. i have tried a different computor but again nothing happens. when i attach the flash card direct into a computor i borrowed then no problems at all.


Do what the pros do...use a card reader. ... Nikon Coolpix 5700 Digital Camera

I have a olympus master digital 1.42camera,which is not recognised by the computor, when I push PC, it says one moment please, but the camera never connects to the computor


Try selecting "CUSTOM PRINT" from the camera menu after connecting to a computer. Then, select your C drive. This usually helps bypass the problem. ... Olympus FE-170 Digital Camera

When I plug the wire into my camera this has always started a connection into the computor and I could start downloading my pictures. In the last two days it will not connect to the computor- there is just a blank screen. What do I do?


I understand you?re interested in transferring the pictures from your camera to your computer. Please follow the following steps 1: Connect the camera to the computer using the USB cable, U-8. 2: Turn the camera on 3: A window will automatically appe ... Kodak EasyShare C633 Digital Camera

How to connect camera to computor. - Vtech Digital Cameras


I huckcamra to coumpter and nothing is happing\015\012the photos do not uplode ... Vtech Digital Cameras

Hi i have a panasonic FZ38 camera - i took some videos on the AVCHD lite format, you could view them on my windows xp computor, but they would not download so they could be stored. so i uninstalled the photofun software, i reloaded it and now when i connect my camera to PC nothing happens, i can not veiw pictures or videos.Any suggestions? thanks Colin.


-try to reinstall all the drivers from the supplied cd-dont connect the camera during driver installation ... Panasonic Lumix DMC-FX50 Digital Camera

Can not connect camera on to computor


I would make sure I had enough system resources to run the program check to make sure you aren't having a problem with the driver for the camera software it may need updating in order to properly work. you can uninstall the provided software and rein ... Sanyo Xacti VPC-T700 Digital Camera

My computor is Vista and I cannot connect my R4 CAMERA TO IT


... Ricoh Caplio R4 Digital Camera

HOW CAN I CONNECT TO APPLE COMPUTOR - Digital Cameras


Via a USB port is probably the easiest. There may also be a firewire option on the Apple as well. All you need is the correct lead. ... Digital Cameras

I have a Praktica digital camera DCZ8.1 I am unable to connect it to my computor as the screen keeps saying USB fault What can I do


... Digital Cameras

Camera works fine with power supply cord connected. It will also charge the battery if connected to camera and power supply connected to ac outlet. Checked battery and it has 8.32 Volts stored in it after charge, however the camera will not power on with fully charged battery. Checked DC connection plug where power supply connects to camera and battery voltage present at connecting port with charged battery connected. Checked 3 Spring pins where battery connects on camera and voltage present whe


Your charger is probibly the problem i had a friend of mine that had the same problem but different camera i told him to get a new charger he did and it worked so yoyu do the same goodluck:) please rate this solution... ... Digital Cameras

I have D-link DSC-350F, when I connect with my computer, camera display PC,While PC said camera not found may be USB cable not connected properly, but its already connected thats way, camera display PC, its mean its connected,please help me to solve this problem for use my camera. my operating system is windos Vista


Solve all your problems by using a card reader. ... Digital Cameras

No connection between camera and computer, sometimes it connects but won't stay connected long enough to download pics. Its not the wire as it has worked with a different camera. I tried putting the memory card in another camera and using different computer but that didn't work and after taking the memory card out of that camera it no longer will connect either.


Please make sure that "mass storage" is set under connections when your using the memory stick to transfer pictures. ... Sony Cyber-shot DSC-T70 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


1. Remove the software- Windows does not need it. 2. Check the batteries are fresh in the camera. 3. Try another lead.4. if the Memory card is removable- try it in a card reader.---------------------------------------- ... Praktica DCZ3.2S Digital Camera

I have a Panasonic DMC-FX30 camera and an iMac.  The last time I connected the camera to the mac the pictures showed up like usual.  However, I think I disconnected the camera from the mac without dragging the no name icon to the trash.  Now when I connect the camera to the mac, the camera displays the connecting image, but the no name icon does not appear and the pictures do not show up on the mac.


Download the drivers and software to the camera again then restart mac It should work now! Have a good day! ... Panasonic Lumix DMC-TZ1 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


When it's plugged in, are you remembering to press the little (M) button to switch it to PC mode? If so, you might need to install the camera device. Go into your Control Panel and follow the steps under the Scanners and Cameras tab.\015\012 ... JVC GC-A33 Digital Camera

Samsung l83t how can i connected my camera with cumputer, when i connected my camera with cumputer camera is shut down. plz tell me what ido my camera is on when i connected with cumputer


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Samsung Digimax L830 Digital Camera

My camera says 'Connecting to PC' all the time when I turn it on even if it is not connected to PC. I think it has got confused as the last time I used the camera was to take photos off it and it may have run out of charge while connected to the PC. I cannot use the camera as it always has this 'Connecting to PC' message on it.


Connect the camera to your PC. Turn it on. Wait till the PC 'acknowledges' the camera. Then disconnect it via 'remove USB-device safely'-function.If this doesn't work. try resetting the camera with the reset button you'll find under the c ... Nikon D40x Digital Camera

Olympus Stylus 770 SW is not seen when connected to a PC or laptop. The camera is off when connected to the PC/Laptop and powered on once the connection is made. Note: This camera has been connected to the PC and laptop previously. This is a new issue with this camera.


Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or conn ... Olympus Stylus 770 SW Digital Camera

How do I transfer the pictures taken with my Olympus μ-5010 to my HP71-340US Notebook? I connect the camera to my PC's USB port, my PC recognizes the camera, I get the schematic diagram on my PC screen showing the connection but, when I click on "Transfer " I get the message "There is no Media to Transfer". When I click on the Arrow which is on the connecting line of the diagram pointing up towards the "Transfer" box, I get "Camera Error". I bought the camera a couple of days a


You might want to consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (eit ... Digital Cameras

I have a Sony Cyber-Shot digital camera. I have an eMac, OX 10, Version 10.5.5. Up until yesterday I was able to connect my camera to the computer to download pictures from the camera. All of a sudden it has become impossible for me to get a connection. I connect the cable to the camera and to the usb port and then turn it on. Nothing happens. Help!!!!!


Problems like this can be eliminated by using a card reader.These USB card readers usually need no drivers with the latest OS systems. With older systems you may need drivers. They will show up lile a mass storage device. I have used a card rea ... Sony Cyber-shot DSC-W55 Digital Camera

My finepix J38 camera isn't connecting to my computer. the USB cord is fine and my camera isn't broken. i have another camera and i also tried to connect it to my computer but it wouldnt work. by the way i tried two other different computers and none of them connected the two cameras.


Why don't you stop worrying how to get the connection working and just use a separate card reader to download your pics. ... Kodak EasyShare C633 Digital Camera

Can't connect to pc through the usb port. I used to be able to connect the camera to any pc by connecting with the cord to an usb port - all I did was connect and switch on the camera and it gave me the option of 'computer' and then it would give me the option to open the files and download onto the pc, but now when i plug it into the usb port and switch the power on the camera just switches on and does not show up in the computer at all so my photo's cannot be downloaded onto my pc


Hi, ... Casio Exilim Pro EX-F1 Digital Camera

I just got a new hp laptop with windows 7. i loaded the software for the camera successfully and the driver for the camera. when i connect the camera to the computer with the usb cord, the camera is not opeing the eos utility and i don't think it is recognizing hte connection. do i need to do anything else to set up the connection?


Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Canon PowerShot SD600 Digital Camera

My camera will not connect to my laptop. I have had the camera for about 9 months and not had any problems with it before! Every time I plug the usb cable into the laptop the camera say " processing - computer connecting and then connection fail. I have un-installed and re-installed the software but to no avail. It simply doesn't seem to recognise the camera anymore. I have no idea why this is happening and it simply will not work. It is very frustrating. The troubleshooting section of the manua


Most of the time, Windows update is at fault. Pros avoid this problem by using a card reader for downloading their pics.\012 ... Pentax Optio M85 Digital Camera

Olympus FE-320 Digital Camera will not transfer photos to Computer via USB port hook up. When connected and PC or Transfer selected, screen message on camera says "Wait" and never connects. When Olympus Master 2 program opens on computer it does not recognize Camera Connection and continues to search for Camera so no images can be transferred. This combination did work in the past but has stopped. All updates have been applied. Need help.


I'm sorry that the Camera is not recognized by the Computer. Unfortunately, knowing the Operating System is the key element in providing troubleshooting the PC connection. However, I will give you the troubleshooting steps which is general for ... Olympus FE-320 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4111 seconds