Having problems with your Sanyo Xacti VPCX1200 Digital Camera ?

System error When I turn on my digital camera the lens opens and closes and then the screen appears and says system error and shuts off compleatly what do I do?


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Sanyo Xacti VPCX1200 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

System error When I turn on my digital camera the lens opens and closes and then the screen appears and says system error and shuts off compleatly what do I do?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sanyo Xacti VPCX1200 Digital Camera

When I turn on my digital camera the lens opens and closes and then the screen appears and says system error and shuts off compleatly what do I do?


Hello,Remove any storage cards that may be in the camera, replace the batteries (or put on charger if not replaceable). Try to turn the camera on, if you still get the error, contact Sanyo for help in trying a master reset for the camera ... Sanyo Digital Cameras

Hi.. My Olympus Stylus 710 camera is one year old and I have been having problems with it recently. Basically the camera is unusable right now. When i press the power, the lens open halfway, the picture on the LCD is blurry and one second after the lens close and an error appears of the screen saying "D: 5f08 5f0e 5f08 5e02". Can you help me fix this problem? Sending the camera back to Olympus to fix will cost a bundle and where I live, no one fixes digital cameras.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode ... Olympus Stylus 710 Digital Camera

System error when I start my Nikon Coolpix L5 it appears in the screen the message "error del sistema" that means system error and after a while it shut off. I want to know if it is possible to reset the camera, and how to do it. Thanks in advance Ricardo Nocchi


... Nikon COOLPIX L5 Digital Camera

Zoom error When i turn the camera on, the shutter opens, then closes, then it beeps and says zoom error on the screen. I am able to shut it off, take pictures off it that are on it, get to the menu screen, and pretty much everything that isn't taking pictures.


If you are still under MFG warranty and bought it from Best Buy they will ship it to service most likely, If you have their service plan they will be able to ship it for service... this needs to be serviced by a professional repair place... ... Fuji FinePix A500 Digital Camera

Zoom error When i turn the camera on, the shutter opens, then closes, then it beeps and says zoom error on the screen. I am able to shut it off, take pictures off it that are on it, get to the menu screen, and pretty much everything that isn't taking pictures. le focus ouvre plus et ou ne ferme plus focus erreur


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have to get it fixed by ... Fuji FinePix A500 Digital Camera

Any time I connect the usb cable camera to computer, the notice: "New hardware found.." appear on screen. After install, some times the computer freezes but mostly nothig happens: No camera, no usb disk (from My PC), nothing. At Control Panel-> System-> Hardware says USB Still Digital Camera with interrogation mark. When I try to reinstall the driver, the program don't find ANY driver, even at Camera intallation CD or at folder with the downloaded driver from Digital Blue. At the little screen o


Please get it here :\012www.drivershq.com/driver-update/digital-camera/disney/\012\012\012Regards, ... Disney Pix Micro Digital Camera

Minolta G500 My camera lense wont close says system error S0042. Didnt drop it just open the lense to take a picture and green,red light started to flash on and off and then on the screen it said system error S0042


Your lens mechanism is stuck up! try pulling the lens with slight force, if you are lucky the culprit that is blocking the mechanism will get loose. If you are not lucky theres no way you can remove or fix the problem than sending it to the authorize ... Konica Minolta DiMAGE G500 Digital Camera

We have a Panasonic DMC ZS3 camera that has been working fine until now. We are on the North West coast of Costa Rica. When you turn the camera on, the lens, which was out when shut off, goes in, then comes back out. The camera screen tries to focus, then goes to a blank screen and says "SYSTEM ERROR (FOCUS). When you shut it off, the lens does not retract.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Panasonic Lumix DMC-ZS3 Digital Camera

My camera keeps saying: A camera error was detected Will shut down automatically Restart E32 I tried to restart it but still the message continues to appear on the screen...I can only do the preview f


I am sorry to say that the only way this is going to stop is to have your camera repaired !!! It requires service and there is no way around it. ... Canon PowerShot SX160 IS Digital Camera - Jap/Eng

Lens error I tried to turn off my camera, (Digital Ixus 60) and the lens froze halfway closed. When I tried to restart the camera, an error comes up on the screen, saying LENS ERROR, RESTART CAMERA. I had this problem before on this camera, but while it was still under warranty. I sent it to be fixed, but now it seems the problem isn't fixed. Is there anything I can do now?


The only thing is, is that it is past it's warranty. THE WARRANTY ONLY COVERS DEFECTS, AND FACTORY ERRORS. \015\012\015\012IF THE LENS DOESNT GO BACK IN, THEY CANT FORCE IT AND YOU PAY THE FULL COST OF THE ENTIRE LENS BEING REPLACED AND T ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I can not open digital photo professional 2.2 it opens and as soon as the main screen show it will give an error and says program will be shut down and error log created. I have removed and reinstalled a number of time still the same message. Andy


I down loaded the newest version of the program and all is well. ... Digital Cameras

I dropped my camera on the floor while i was taking a picture , the camera shut off , but the lens stayed popped out . i tried to turn the camera on again , but i would only show me the home screen , which says "Kodak Easy Share System , Share" then the camera freexes up , and it say in the top left corner , "lens error : 22" i've tried smacking it against things , i've tried smacking it on my hands , i've tried pulling out the lens , NOTHING WORKS. Please Please Please Please Please Please Plea


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Kodak EasyShare CD33 Digital Camera

Lens Error Whenever I try to turn on my Cannon Powershot SD1000 digital camera the screen says ''lens error, restart camera'' but then it shuts off. What should i do?


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot SD1000 Digital Camera

Sony Cybershot camera will no longer take pictures. When turned on the lens keeps opening and closing and the screen says ACCESS. Then it says shut off camera. The battery is fully charged, not sure what the problem is? The camera is 2 1/2 years old, is that the life span of a digital camera?


I had the same problem. I looked at FixYa some months back and found the solution. Give the camera a jolt against something hard. . . has worked for me several times. ... Sony Cyber-shot DSC-W50 Digital Camera

Sometimes when I try to take a picture the screen says"system error" and I ahve to turn iy off and try later. Also when I try to open the pictures in my desktop, it says arror and shuts down.


Hi\015\012\015\012You might want to open the cam by carefully unscrewing all of the tiny screws. Then I took apart the two shells. I found grains of sand obstructing the lens motor gears, that I cleaned off with one of those small brushes ... Nikon Coolpix 775 Digital Camera

It keeps saying system error on the screen - Nikon COOLPIX S60 Digital Camera


Hello. you may be involved in a recall. please read this http://www.nikonusa.com/Service-And-Support/Service-Adv ... Nikon COOLPIX S60 Digital Camera

I have a Panasonic DMC-ZR3 Lumix camera.The lens does not close all the way when I turn it off and when I switch it on it says system error on the screen. I can't take pictures or view pictures.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic LUMIX DMCZR3 DMCZX3 Digital Camera

I have an Olympus Stylus Tough -6000 digital camera and when I turn it on a message appears on the screen that says "Card-Cover Open" and it won't allow me to operate the camera. The problem is that the card cover is NOT open, the battery and USB covers are securely closed, so I don't know what to do. Please Help! Thanks


Is the card all the way in? ... Digital Cameras

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Try new batteries ... Sony Digital Cameras

When i press the power button to turn on the camera, the lens does not come out as it should - I get a "Lens Error - will shut down automatically - restart camera" appear on the screen - My Camera is the PowerShot SD1400 IS Digital ELPH - I have only had this camera for a few months


See Lens Error ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

Hello, I have 2 problems with my Panasonic Lumix DMC-FS4 Digital Camera. Firstly, at the lower left corner of my screen, there is a dark shade. So in all my pics, there is sth black on the lower left corner. Secondly, I can't zoom to the maximum, it says "turn off the camera" or " system error (Zoom)". Any help will be highly appreciated. Thxs :)


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FS4 Digital Camera

D: 5f08,5f0a,5f08,5e02 When i press the power, the lens open halfway, the picture on the LCD is blurry and one second after the lens close and an error appears of the screen saying "D: 5f08,5f0a,5f08,5e02". what does this mean??? can you help me fixed this one??


... Olympus Stylus 710 Digital Camera

My camera keeps saying: A camera error was detected Will shut down automatically Restart E32 I tried to restart it but still the message continues to appear on the screen...I can only do the preview for few seconds or a minute. Please help me fix this problem. Thank you and godbless!


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will have ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4943 seconds