Having problems with your Sony Alpha DSLR-A330 Digital Camera ?
Camera: Sony A100
Doesn't power up from internal batter ( just blincking of power up red indicator, all other functios dead)
Powers up from DC adapter
Display shows "bulb"
No shutter release
Full access to menus
Records blank image to memory card
with regards/Peter Bacler
Repair Help & Product Troubleshooting for Sony Alpha DSLR-A330 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Camera: Sony A100 Doesn't power up from internal batter ( just blincking of power up red indicator, all other functios dead) Powers up from DC adapter Display shows "bulb" No focusing No shutter release Full access to menus Records blank image to memory card ????????????? HELP, please... with regards/Peter Bacler
... Sony Alpha DSLR-A330 Digital Camera
Nikon d80 - most of the time memory card access lamp flashes and shutter release button doesn't trigger shutter. Sometimes it will stop blinking and camera will fire. Sometimes when it fires it will not show a preview image. When malfunctioning I can not bring up menu screen or access any features (shutter speed, f-top, or review screen. Have tried different memory cards, and lenses with no change.
Hi pantha. Turn it on and go into the menu and find the reset function. Reset it. This will merely set it at all of the parameters it was set at in the factory. IF this reset does not solve ALL of the problems, then you will have to take it or sh ... Nikon D80 Digital Camera with 18-135mm Lens
Install fully charged batter, turn camerap power on, LCD panel indicated full battery power, push shutter button halfway down to auto focus, can maybe take one picture with what seems to be a very slow reacting shutter, then LCD panel goes blank as if no batter paower remains.
Is your battery new? Try to use another battery to isolate the problem. Even if you're saying that the battery is fully charged, there are chances when the battery fails. If it is under warranty, I would suggest that you ask for a replacement. Bat ... Canon EOS-10D Digital Camera
Hi, the flash card card-eject lever spring is broken and wont eject the card. u have to manually push the card in place and pull the card out. the lever stays up until u shut the card slot door.once the card is in place the camera can read the card if images already exist. but...it will not record an image and shows up as blank on the screen after the shutter takes the image? is this the cause of the broken eject lever. thanks.
I have the same problemI think that the reason that the not record the image is that the card slot door is pushing down on the card eject lever and ejecting the card when the door is closedThe only answer I can think of is to shorten the leverdavidh ... Konica Minolta Dynax 5D / Maxxum 5D Body only Digital Camera
When I turn on my Samsung NV3 camera, the shutter opens, a blurry image appears on the LCD screen and then it turns its self off. Although the camera appears to be off, if you press the button to view previous images, the blue power light on top comes back on, and the images can be viewed The battery is fully charged
Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowin ... Samsung NV3 Digital Camera
Blank Screen I have just bought one of these cameras and when you open the shutter to take a photo there is only a blanks screen. I have a second of these cameras so know this is when the camera should 'roam' ready to take a snapshot. If I click the button to capture an image, it is stored and I can see it, but then it goes back to a blank screen. Any ideas :)
Some have a view button which you can choose to put in "black mode". happens a lot. take it to your local camera shop if they know anything they should be able to put it right in seconds ... Olympus MJU 400 Digital Camera
Blank picture when you turn power on the LCD is blank and does not show the image you are pointing at?
Please specify the make of your digicam, which will help us solve your problem.\015\012\015\012Thankyou ... Canon PowerShot A560 Digital Camera
My Canon Ixus 75 will no longer take pictures.The screen remains blank and no image is recorded when the shutter is pressed. All other functions appear normal, including the display ing of previously recorded images.
A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very b ... Canon Digital Cameras
JVC GZ_MG330Hu powers up but , shows white light through the LCD display but no image or surroundings can be shown through the display. It's just blank image.
Hello larks.Just correct me if I misunderstand. The LCD screen is totally white including when you press menu buttons?If so , the problem you are experiencing has to do with the data cable running to your screen. If badly desi ... Digital Cameras
The view finder or screen are black. The lens moves out when the camera is powered on, I can hear the shutter click when pushed; the telephoto is moving; I have all the settings show on the screen when the camera is powered on but I cannot see anything through the view finder or on the screen and no image is captured when a pic is taken. I changed the batteries and it made no difference.
I know it may sound like the shutter is moving, but you're going to have to actually look down the lens barrel to confirm it's actually moving, and not just producing a sound effect from the camera. Also keep in mind Canon's SX IS series cameras are ... Canon PowerShot S3 IS Digital Camera
I am unable to download all of my photos from my digital Canon SD1000 Power Shot. All of the photos show up on the camera and some of them show up with a comment unidentified image; however, not all of them show up when I download on the computer with the cord or through the printer. There are blank icons on the desktop for many of the photos. Is it possible to copy from the camera images? Help, these are photos of a school in Indonesia that we sponsor and now I am back in US and can't get the p
If you are using a memory card, take no more pics until you've recovered the photos, take the card out of the camera. This is to reduce the chance of you overwriting some of your lost photos. There are many good freeware photo recovery software opt ... Canon Digital Cameras
I own a canon s2 is power shot. Symptoms began with the digital zoom beeping and the screen going blank when invoked to draw an image closer. After a periood of time of avoiding the zoom, the camera lense stuck inside and gave an e18 message when beeping. I could still survey old pics but can't take new pics as the screen is blank and the lense won't come out. The warranty expired 10 months ago, I've tried forced air, changing batteries and mem card and pressing on the lense. The lense is off to
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Canon PowerShot S2 IS Digital Camera
Hi I bought my Sony cyber shot DSC-S730 a year or so ago. Have had constant problems with shutter not opening which in the past has responded to turning camera on and off mulitple times. Now, New batteries, try to turn power on and nothing happens, access code lights but shutter won't open.
It need lens servicing.And sensor must clean ... Sony Cyber-Shot DSC-P52 Digital Camera
Every time I power up my D5000, and press the shutter button half way (to auto-focus) the image in the viewfinder shakes, and after a few seconds the image shifts slightly and something internal seems to lock into place. After this, all functions are normal, but this issue is annoying, and obviously not right. Any ideas?
Inside the lens assembly, is a circular, edge-geared focusing lens, with electromagnets on it. It has to be able to spin freely to focus, and focuses with signals from the focusing system and cpu, etc. When any dust, lint, sand, etc. get inside ... Nikon D5000 Digital Camera
I have this camera Kodac EasyShare P712 - the power comes on but the screen is blank is that Blue Black can not see image on screen
Hello, Was the LCD turned off in the setup menu ? ... Kodak EasyShare P712 Digital Camera
I have same problem with my 40D. Push the shutter button and it switches off. Have to remove the bettery for it to switch on again several times but still doesn't working. When I put battery back in the camera the access lamp blinks even though power switch is off. Any ideas??
... Canon EOS 40D Digital Camera
Error message 05 appears in status screen. Camera powered down for 15 hours and message changed top "busy" but still no access to menu or any other control. shutter will not work. cannot view files. many thanks
Have you removed all batteries, including the date battery? If not,\015\012please do that, cycle the power switch and shutter switch a few times\015\012and then let the camera sit for half an hour or so. After that, put the\015\012batteries back in a ... Canon EOS 40D Digital SLR Camera Digital Camera with 17-85mm IS USM Lens
Blank Screen I have a Sony Cyber-shot model #DSC-S40. The screen is bright white with an occational blur of the image I am aiming at. I have taken the batteries out several times and that cleared it up one time but has since went back to the white screen. I can still take pictures using the veiw finder but I can not see them on the screen nor can I access any menu functions. The camera still takes awsome pictures so I don't want to just throw it away. Please help! Thank You, Tim
I have been facing the same problem with same model and this is permanent problem it seems with this model (Sony Cybershot DSC S40). It causes because of the following:SYMPTOMSLCD display is either blank or WHITE. When the cabine ... Sony Cyber-Shot DSC-S40 Digital Camera
I have cannon power shot a95 camera. when I turned on today the lcd screen was blank and it takes black photoes. Working though as you can review past pictures. Changed the bateries and memory card. Reconfigured memor card also. The icons show on screen. The shutter is opening and the counter is advancing and flash working. please help me. thanks
Call support 1-800-828-4040 and describe your problem to them.They are going to send me a shipping tag for free shipping and will repair the camera for free if the problem is the CCD Image Sensor.Consumer Products Hom ... Digital Cameras
CANON 40D. Had Flash Error code 05. Powered down for 12 hours. Camera now gives message "Busy" when shutter trigger button depressed. Flash works manually and antennae pops-up , Flashes works manually. Have no access to any other control or menu. Both memory card and battery have been taken out and replaced several times.
Pop up flash locking mechanism needs adjustment or to be replaced . You\015\012might be able to do this yourself but the top cover has to come off\015\012completely ( the mechanism I am talking about is on the inside of the\015\012top cover and is no ... Canon Rebel XT / EOS 350D Digital Camera
Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!
You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera
Canon SD400 I dropped my SD400 and it will turn on, but the shutter will not retract. However, the screen comes on in color and then goes black and says no image. I can access the menu screen while on the picture taking mode. If I move to anything else the camera beeps three times and turns off. What should I do? Can it be fixed? Should I take it somewhere to get it fixed... and where can I take it?
Its very eas to fix this one.. \015\012\015\012just use a small screw driver and open it up.. \015\012\015\012its possible that the gears were just misaligned. \015\012\015\012got mine fixed.. ... Canon PowerShot SD400 / IXUS 50 Digital Camera
My cybershot camera 7.2[ when i turn it on it reads access and a blank screen, then after a minute or so it displays turn the power off and on again. when i do so, nothings happens still the same problem. any resolutions?
Lens problem. Contact your local Sony service center or if they ask too much, feel free to contact me at firstname.lastname@example.orgI work in a Sony service center.Tom ... Digital Cameras
Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho
I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera
Canon EOS 3000V The film is blank when developed. there a few smudges in a couple of corners but that is it. Man in shop said it looked like a shutter problem. could this be caused by low battery power?
Dust on the image sensor of a digital camera will show up as a dark spot in the same location of every frame. The sensor is a delicate piece of equipment and you need to clean it to solve your problem .... I dont think poor battery can cause a smudge ... Digital Cameras