Having problems with your Sony Cyber-Shot DSC-F828 Digital Camera ?
Lens is loose from body
\015 The lens seems to be separating from the body. Is it easy to take apart and tighten?.\015
One note on this fix. There are four screws that need to be tightened on the lens. With the cover off and the lens pointing straight forward, there are three small screws visible. After tightening them, rotate the lens upward to expose the fourth screww. After that one is tightened, you can then replace the cover and six cover screws.
How did you order the replacements screws?
How did you order the replacements screws?
Repair Help & Product Troubleshooting for Sony Cyber-Shot DSC-F828 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Loose lens? The camera works well and takes good pictures. However, the lens has developed considerable movement across its axis, and the sideways movement can be felt when moving the camera body from side to side. Is this looseness an indication of likely failure in the future, and should I do something about it at this stage? Any opinions would be appreciated.
Dont worry about, if its working fine, just crap maufacturing ... Sony Cyber-Shot DSC-P12 Digital Camera
Loose barrel lens can't stay in place connected to the body
Take it to your local camera dealer. They can snug it up for you, or you can do it yourself with a small philips screw driver(like what you would use on a pair of glasses.) Just snug the rings on both the camera and the lens. ... Nikon D90 Digital Camera
Lens is loose from body
One note on this fix. There are four screws that need to be tightened on the lens. With the cover off and the lens pointing straight forward, there are three small screws visible. After tightening them, rotate the lens upward to expose the fourth ... Sony Cyber-Shot DSC-F828 Digital Camera
The problem I'm having with my Sony DSC F828 is that the mobile lens has come loose from the body of the camera. There are no obvious screws visible that would stabilise it. I have read that it is a commin problem for this model. I would be grateful if you could help me find a solution. Should I take it in to get it fixed professionally or can I do it myself? thank you
Hi,\015\012I had the same problem. I have done a comprehensive repair which I have documented on my blogsite: http://howtheheckdididothat.blogs ... Sony Cyber-Shot DSC-F828 Digital Camera
No focusing because lens contact with body theres is no compact fit, there is a little loose on both
The mount can be replaced on this camera, but you also might try cleaning both sets of contacts with alchol and a cotton swab. ... Nikon D80 Digital Camera with 18-135mm Lens
I have a EOS-650, 35mm film camera(not digital)body. I want to purchase a lens for it. I need to know what model number lens and type will be compatable for this camera body? There are several to choose from but only certain types of lens will work on this type camera body. Some examples are EF type and USM type. I do not want to purchase a lens that I will be over paying for or that will not work on this type of body or is not design for it all together.
I am sorry but everyone will give you an openion that may work for them and not you. You need to go to cam shop and test the lenses that fit in your cam and get all information that you need then go back on your net and shop for good prices, but as ... Digital Cameras
I JUST PURCHASED TWO ALMOST BRAND NEW - 1-120 MAMIYA C3 BODY, AND A 135MM MAMIYA EXCELLENT LENS AND ONE MAMIYA C220 BODY, AND ANOTHER 135MM SAME LENS AS FOR THE FIRST CAMERA. REGARDING BOTH GREAT BODIES =THE CUT OFF ON THE BODY OF BOTH CAMERAS, WHEN YOU ARE PHOTOGRAPHING, IN THE SCREEN, SHOWS TWO "CUT OFF LINES, SO THAT YOU ARE FORCED TO FIT YOUR SUBJECT WITHIN EITHER OF THE TWO LINES. VIEWING THE TOP LENS PART, I NEED THE EXACT LOCATION OF WHERE I ACTUALLY SHOOT "UNDER THE LOWER OF THE
... Mamiya Digital Cameras
Lens error when trying to power on camera. no dirt in lens. lens extends buzzes retracts and turns and then repeats before fully retracting. Can see camera focusing while cycling and retracting. lens error appears on screen at end of cycle. tried tapping camera and lens body to dislodge dirt as well as compressed air on lens body without success. any ideas?
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Nikon Coolpix S210 Digital Camera
I got one Petax SLR Camara, K1000 body with 1:1.2 lens. Can I use this lens with any Digital Camara body. Will any DSLR Body will suit to this lens.
Only cameras with a Pentax mount can use the lens. ... Pentax Digital Cameras
D40 55mm lens will not fix to body
Best thing is take this into your local camera shop and try another lens...if the problem persists,you have damage to the camera.Though does sound like you have snapped the lens mount and im not sure if this is repairable.Best ... Nikon D40 Digital Camera with G-II 18-55mm Lens
I have a Nikon D80...On every photo I take there is a very thin, very light line all the way across the image..I have tried 3 different lens on this body thinking it might be the lens but every lens still has the line...so I am positive it is the camera body itself..what is this?
It is a sensor problem. You should contact the support people at the Nikon website. ... Nikon D80 Digital Camera with 18-200mm Lens
Lens has become Loose
If it is at all like my C8080, there are 4 screws that hold the lens guard in place, accesible only when the case is opened. This is the fixed tube that the lens extends out of. The knurled coller is a screw on piece that allows a lens tube to be scr ... Fuji FinePix S5000 Digital Camera
Lens adaptor I purchased a Phoenix 1300mm lens for my minolta cameras, maxxum 7d digital and analogue. The lens adaptor that was supplied with the lens has no cantacts and when attached to the body and the shutter release pressed, the camera indicates that there is no lens attached. The company that I purchased the lens from in Queensland Australia, and Phoenix themselves no longer seem to be in business so Ihave no results from them. The Phoenix lens is a screw mount looks like early Pentax but
The good news is that it is possible to get the camera to operate with the lens & adapter :-)The bad news is that you'll only be able to use it in manual mode :-(To get the camera(s) to actually fire, you will need to chan ... Konica Minolta Maxxum 7D / Dynax 7D Digital Camera
Nikon d3000 I made the mistake of recently dropping my new D3000 (Was in a padded case, and only fell a small distance) but since the fall my pictures are not at all in focus and are very foggy. Everything else seems fine except for the fact that a small black piece of plastic fell out, though I am not sure if it fell out of the lens or the camera body. My big question - do you think there is a problem with the camera body - or is it the lens? http://www.tiikoni.com/tis/view/?id=aaa702a (Pictu
Did you try a different lens if you did send your camera in for repair . the lens gets damaged easy ... Nikon D3000 Digital Camera
I have an sigma 100-300mm F4.5-6.7 dl lens which I am currently using with a 35mm body. Will this lens work ok with a new digital body ?thank you shirley
That depends. If the digital body is from the same manufacturer as the film body then it should at least fit. Depending on the vintage of the lens and the particular digital body, you may not have all of the metering functionality and you may have to ... Digital Cameras
Can I use TOKINA lens 28mm-210 lens with this Nikon body or can I use with other NIKON body D 700?
Tokina makes their lenses with a variety of mounts. A lens with Canon mount, for example, won't fit onto a Nikon. Assuming you get the lens with a Nikon mount, then yes, you can use it with a D70 and with a D700. ... Nikon D70 Body Only Digital Camera
After having the f828 in my luggage the lens and the body are not tight together anymore. when i hold the lens with my left hand the body joggles left an right? can i unscrew the camera and tighten a screw to fix this?
I fixed that problem by tightening up screws but they were inside the lens turret swivel mechanism. This required some fairly major surgery to get to them and it was a bit intimidating. I carefully noted all the steps, took plenty of photos on the wa ... Sony Cyber-Shot DSC-F828 Digital Camera
My finepix 3800 camera lens ring is disconnected from the camera body. it attaches to the camera body with 3 screws. the screws enter from inside the camera and screw into the lens. How do I attach?? thx Al
You need to remove the silver or black trim ring from the cameras lens barrel by\015\012pushing the silver or black release button located next to the trim ring on the\015\012front of the camera. This exposes the bayonet mount. Find the index\015\012 ... Fujitsu Digital Cameras
Lens assembly The lens assembly has become loose. One of the outer rings has actually detatched from the camera body.When switching on - either the message 'lens fault' is displayed or a very blurred image is displayed in the LCD. The camera shop reckons the problem is quite common and estimates $A200 to fix ie replace lens assembly. Any similar experiences? (Of course, the camera is 3 months out of warranty).
"Lens Error" requires to be sent into repairs. ... Casio Exilim EX-Z40 Digital Camera
THE LENS COVER CAME LOOSE WHEN I OPENED IT UP THE HOLE AT THE TOP OF THE LENS COVER SEEMS TO BE MISSING A GASGET THAT HOLDS IT IN PLACE WHILE THE BOTTOM HOLE ON THE LENS SLIDES IT OPEN AND CLOSED. IT JUST WILL NOT STAY IN PLACE WITH NOTHING TO HOLD THE TOP HOLE IN PLACE. CAN THIS PART BE REPLACED. OR IS THERE SOMEWHERE I CAN SEE A PICTURE OF WHAT THIS LOOKS LIKE WHEN THE COVER OF THE CAMERA IS REMOVED AND THE LENS IS WORKING PROPERLY.
Hello. Your issue is not a common one. Call Kodak directly \015\012\015\012During our normal business hours (Monday - Friday from 8 a.m. - 5 p.m. EST),call us at 1-800-431-7278 ... Kodak EasyShare V610 Digital Camera
Toshiba PDR-M700 When I power up the camera, the lens will not come out and sometimes will come out all the way to maximum zoom. When I power off with the lens out, it clicks as if something is stripped or loose. After shut down, I can push the lens back in. Once in a while the camera will work but eventually the "Lens Error" message comes up. This was a good expensive camera when I bought it but taking it in for service would probably cost more than the price of a new camera today. Can you sugg
It sounds as though the drive gear is slipping... If you give up on trying to repair your camera I may want to purchase it for parts (my sister-in-law broke my LCD display)[email protected] ... Toshiba PDR-M700 Digital Camera
I have a Nikon D90 with 18-105 mm lens. Lately, the onboard flash has not been firing even when I try to enforce it by having the flash popped up. It will only fire if I do one of the following: 1) unmount the lens from the camera body and then re-mount it back on, which the flash will fire maybe once or twice and that's it!, or 2) switch on a different lens which definitely works with the flash firing every single time. What needs to be done? I purchased this lens last December (2009). Is
Sounds like a dodgy electrical contact, possibly between the lens mount and the camera body. The lens ought to still be in warranty, but that would depend on what warranty the manufacturer or seller offer in your part of the world (in the UK, the sel ... Nikon D90 Digital Camera with 18-105mm lens
Lens broke getting lens error 11500132 did not drop it,lens is also loose can i fix this?
Kodak said, this error may be caused by your batteries as they may be dying or simply\015\012underpowered. High Powered NiMh are recommended by Kodak. You might want to check the link and think about it.http://www.josepino.com/other_proje ... Kodak EasyShare C743 Digital Camera
I'm looking at buying a Canon EOS 400d and wonder if anyont can confirm whether my lens from old Canon EOS 620 film camera body will be compatible. (Unfortunately lens in storage at moment so I can't quote model numbers, but one is Canon 50 mm ultrasonic lens and other is a (I think) sigma 28 to 200 mm)
The canon lens should work fine. Some of the Sigma lenses have to be converted by Sigma to work with digital. The last one I sent to them they only charged me $10 for return shipping. You can find their address online. ... Canon Digital Cameras
I recently attended a wedding and brought my camera for photos. When i went to remove the 18-55mm Lens it was stuck and I cannot remove it. I do not want to force it off for fear of damaging the LENS or the camera body. Is there anything that I can do to safely remove this lens?
DO NOT FORCE IT !! Wiggle the lens while gripping it at the base and pressing the lens release as far in as possible. The release pin is stuck. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera