Having problems with your Sony Cyber-Shot DSC-H1 Digital Camera ?

Access message followed by turn power off and on again


\015 Help! I was taking pictures outside and when I took the camera strap off around my neck I accidently dropped the camera. I can turn it on and review all of my previous pictures but I can not take new ones because I get the screen turn the power off and on again. My camera is an H2, I have read that it is a lens malfunction. Are there any ways to try to fix this? Thanks!\015

Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair \012center for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope \012the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea
Repair Help & Product Troubleshooting for Sony Cyber-Shot DSC-H1 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Access message followed by turn power off and on again


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Sony Cyber-Shot DSC-H1 Digital Camera

Access problem When I turn the camera on, all I get is the message "access" followed by another message to "turn off and on again". When I turn off and on as it said, all it does is recycling the same messages again and again and again..


... Sony Cyber-shot DSC-W55 Digital Camera

SONY DSC-S600 Sorry, no actual error -- what happens is this:- Power on camera, message comes up "Turn the power off and on again". Tried this-no good. New batteries-still no good. Sometimes it will start with an "Access" screen and then go into the "Turn the power off" message. Hope this explains the prob better Regards Sandra


If you are able to access the MENU option, then try to initilize the camera by following the steps mentioned below: \015\012\015\012Please press MENU to display the menu items.\015\012Please go to the SETUP menu and select the SETUP ... Sony Cyber-shot DSC-S600 Digital Camera

When I turn the power on my Sony DSC-P200, a message comes up "access" which fades out. Then it clicks several times and then another message pops up saying "turn power off and on again". I get the same sequence when I turn it off and on again. Any suggestions on correcting the problem?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Sony Cyber-Shot DSC-P200 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

Hello, I have the following problem: I cannot delete images neither take new pictures. When i try to delete pictures it shows the following message: The card is locked, unlock the card to access delete features. When i try to take a new picture it shows the following message: LENS ERROR Try turning the camera off and on again (before this message it says card locked). Thanks for help!!!


Unlock the card by moving the slide switch on the side of the card. Solve your lens problem with these:\012Fixing a Lens Error ... HP Photosmart M447 Digital Camera

When it is turned on a message saying "access" appears then a message saying "turn the power off and on again" . the whole time this is happening the lens moves in and out


Problem in lens unit repair or replace it ... Sony Cyber-shot DSC-W55 Digital Camera

Turn the camera on Message "Access" Lens cycles in and out then stops out Message "Turn the power off and on again" Tried that and problem repeats. Battery is fully charged


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sony Cyber-shot DSC-W100 Digital Camera

When i turn on the power.....it shows access on the screen and then asks to turn the power off and on again......i follow it but nothing happens ...it keeps on repeating it..


Turn on take the end of the lens eand gently pull and twist you may hear it click but dont force it then turn off and on again and this may solve the problem. ... Sony Cyber-shot DSC-W55 Digital Camera

I have a Sony cyber-shot dsc-w30. When I turn it on the lens goes in and out, I get a message on the screen saying "access" then I get a message saying "turn power off and on again".


Sony maks good products and stand behind they product, but they do have a problem with the batteries , change the battery and i bet u will not have that problem ... Sony Cyber-shot DSC-W30 Digital Camera

I have sony handy camera model no DCR-SR68 the problem is when it power on the message shown on display is ::"" OVERHEATED. CANNOT ACCESS MEDIA TURN OFF POWER AND LEAVE FOR A WHILE IN A COOL PLACE"" this message comes permanently


... Digital Cameras

My Sony dcs-p32 camera returns a "memory stick access" error every time it is turned on. The next message is "Turn the power off and on again", but power cycle does not help. Also the reset button will not clear the problem. Help!!!


... Sony Cyber-Shot DSC-P32 Digital Camera

When power is turned on the zoom lense moves in and out on its own for a couple of seconds then stops. Camera remains on (battery is charged) The message changes from "access" to "turn the power off and on again." When that is done the same process happens again. Photos can be retrieved that are in the memory to view but the problem is getting to the starting screen in order to take a picture. What's up with that? Hope you can help!


This could be dust or lint or sand that has worked it's way into the lens assembly, and is keeping the lens from initializing. Often, you can take compressed air and blow it into the front lens assembly, to try to free up the small gears there. H ... Sony Cyber-shot DSC-W55 Digital Camera

When I turn the camera on it says access , the lens goes in and out then I get a beep and message reads turn the power off and on again. I've done this over and over again and it still won't work. Any sugestions?


One thing to test before going to repair, make sure you are using a fully charged and correct battery for your camera.\015\012If so, the camera will need repair. This is a common problem and can be fixed. Teleplan Camera Repair does a great job ... Sony Cyber-shot DSC-W30 Digital Camera

When i turn on the camera the lens goes in and out with the message access on the screen; it then syas turn the power off and on again...any ideas?


This would be the auto focus sensor that instruct the lens to find focal point witch has gone bad you need a camera shop short put there. I mean if there where a end user remedy i would be the first to give it to you but infact there is not you need ... Sony Cyber-shot DSC-W35 Digital Camera

When I turn the camera on it says access , the lens goes in and out then I get a beep and message reads turn the power off and on again. I've done this over and over again and it still won't work.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... Sony Cyber-shot DSC-W30 Digital Camera

When the camera is turned on , the zoom tries to adjust twice while the displays says" access" then it Says" Turn the power offand on again" Following the instruction does not solve the problem, we can see the images if we press play.


Hi, The error "Turn off the power and on again" shows when the zoom motor start malfunction, If you want to repair by yourself and have experience then change the optical zoom motor it will reduce your cost. Otherwise you can change complete ... Sony Cyber-shot DSC-W55 Digital Camera

When powered on, the screen displays "Access". The scroll menu displays fine, and when a new option is selected the message will occasionally change to "Turn power off and on again".


If the unit is out of warranty then there are several diy fixes that may work. Note though that anything is possible and more damage is possible to be done when trying this method, obviously the ideal way is to have it serviced by a professional but ... Sony Cyber-shot DSC-W55 Digital Camera

Hi there it just started doing it when we power up a message comes up saying access turn power off and on again and it trys to move the lense but seems to be skipping or something


... Sony Cyber-shot DSC-H2 Digital Camera

Error message Sony Cybershot 7.2 MP Battery is fully chagred, never had an issue, now it comes up "Access" then with error message "turn the power off and on again" .


Problem in the Lens unit repair or replace it ... Sony Cyber-Shot DSC-S40 Digital Camera

I have a sony cybershot camera and it has suddenly stopped turneing on. instead it says 'access' followed by 'turn power of and on again.' I did that but it keeps saying the same thing... and beeping at the same time


Turn on \015\012gently take hold of end of lense and pull and twist gently\015\012switch off then on and problem should go away ... Digital Cameras

When turning camera on--- the lens is going back and forward, after some seg appears the following message on the displaz "turn power off and on again". Does anyboday says anythings how to solve this problem? Thanks


Sounds like the lens if jamming from dirt, or you may have a bad gear. Digital cameras often have this problem. You can try blowing compressed air to fee any dirt, but if that doesn't work, it will require servicing, in which case it's usually ch ... Sony Cyber-shot DSC-W80 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2383 seconds