Having problems with your Sony Cyber-shot DSC-N1 Digital Camera ?

Menu and display buttons do not function


\015 Camera powers on; lens appears to work; shutter and flash works but display does not change. Have removed and reinserted the battery and memory stick, nothing changes. I've snapped the shutter several times in the flash mode, it acts like I've taken pictures, but I don't see them.\015

Answers :

Hello,
\015\012One quick question. Is the camera taking photos?? when you try to transfer the photos to computer , are the photos fine or there are some Black photos??
\015\012
\015\012Regard's
\015\012Manoj Goyal, INDIA
\015\012+91-9214988557
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-N1 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a problem with the Canon Powershot 850 IS. Most of the functions on the camera (Zoom, menu, display, menu and function set) are frozen and all I can use is the image capture button and the scroll wheel on the upper right hand side. Can you please provide me with a solution to this problem? Thanks, Robert


The issue here is the micro circuit board inside the camera overheats, from what i read canon is aware of this flaw and has repaired free of charge. But you do need to ether take it to a authorized canon shop or return it t ... Canon PowerShot SD850 IS Digital Camera

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.


Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera

After turning it on, the lens keeps on zooming out then closing in three times then it displays ''Turn it off and on again'' on its shooting (standby) mode. All other buttons functions well except for Menu button.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

Menu and display buttons do not function


Hello,\015\012One quick question. Is the camera taking photos?? when you try to transfer the photos to computer , are the photos fine or there are some Black photos??\015\012\015\012Regard's\015\012Manoj Goyal, INDIA\015 ... Sony Cyber-shot DSC-N1 Digital Camera

PS A85 takes pictures fine, but I can't use menu, function, display, or set buttons or zoom. How to fix?


Firmware update\015\012go to canon.com and search for your camera then download the firmware update and install it while the cam is connected via USB ... Canon PowerShot A85 Digital Camera

Canon SD900 selection options not responsive. The selector wheel, Function Set button and menu selector only work from time to time. Even if pressing the ring brings up info to the LCD, nothing can be changed because the Function Button and the Menu button are not active. This is a random problem. Sometime, I can bring all functions back to life by removing and re-inserting the battery and restarting.


Sounds like the board has become damp and possibly corroded in certain parts this causing the random effect with the buttons their isnt much you can do unless you can remove the case yourself and give it a good clean but doing this is extremely diffi ... Digital Cameras

Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec


Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras

Menu, dispaly and function buttons are not working


... Canon Powershot SD450 / IXUS 55 Digital Camera

Lost functionality Camera is about a year old. Suddenly, zoom doesn't work, Set button doesn't work and Display button doesn't work. Other than that, it takes pics and displays them. But without the Set button, I can't change settings. Any ideas?


I have the same problem.. happened after leaving it uncharged for more then a year. I think its a software problem.\015\012someone know how to do hard reset/reboot? ... Casio Exilim EX-Z750 Digital Camera

The function button on my d40x i think is sticking because when i turn my camera on the self timer keeps flashing and when i try to access the menu or any other functions like playback it wont allow me the only thing i can think is that the function button by the lens is sticking hints the reason it is flashing and wont stop is there a way to fix this?


Since you can't get into the menu, let's try a manual reset. Remove the card and the battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Nikon D40x Digital Camera

Green light on camera back to the right of the 'delete' button continually flashes on-off about 1 second intervals as soon as battery is inserted as long as CF card is in place. Switching camera ON produces no visible operational indicators. Depressing "Menu" button flashes: hour glass; menu display; blank screen. Holding button down just cycles as above. Swapped lens, data card, battery, connected EH-5 power source; nothing makes any difference. Checked same lens in another D70 camera; it's OK.


I would start by looking into the memory card slot to see if you have a bent pin. You may need a small light and a magnifying glass to see them. If the pins are okay, then you can try a reset by holding down the BKT and metering buttons toget ... Nikon D70s Digital Camera with 18-200mm lens

Canon Powershot S1 IS has blurred image on both flip display and internal display (identical); menu graphics display fine, menu functionality (changing options) diplays and works fine.


Your Canon S1 IS has problem of CCD Imager Sensor and need to be replaced.Canon has announced free of cost repair scheme for such problem in S1 IS model.Click ... Digital Cameras

I have a Panasonic DMC-LX2 digital camera, I'm based in the UK. Has worked fine for a couple of years, but 2 weeks ago, when powered up, none of the buttons work. Screen is illuminated, lens emerges OK, mode-select dial still rotates and switches between modes, on/off switch and aspect switches OK, but shoot button, all 5 'menu group buttons, anti-shake button, display/LCD mode button, waste basket buttons', zoom in/out control and 4-way direction button all 100% non-functional. Card is being ac


I just got identical situation today, and I have no clue at all. However, I figure that the camera is actually working busy like someone is holding the "UP" button continuously. To see this, power on your camera at any mode except the "Scene mode". A ... Digital Cameras

Camera digital display is not activated when the mode is in Photo or Video. It shows only black with some icons.But the digital display is functional when i am in Function set or Menu mode. This camera is just new, Would you provide me good solution?


It would seem that the pickup sensor may be defective. Since camera is new, it should be under warranty. ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

My Pentax Optio M60 lens seems to be frozen half way out of the camera with the lens cover also partially open. When I turn in onn it sounds like the lens is trying to focus then turns intself off. Nothing is written on the screen unless I also press the menu button which displays VER 1.00 before bleeping three times and turning off or the green button which displays VER 0163A SBM -FIRM before beeping 3 times and swithcing off. Nothing else seem to do anything. I havn't dropped it or got the cam


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Pentax Optio M60 Digital Camera

My camera taks picture but i cant see them on display..the display is black but when i press the menu button i can see the menu..do i have a problem with the lenss?


Hi, I have the same issue with this camera and Fuji suggested that it could be the sensor fault. Strange to see that you had my same problem at the same date of mine. Did you get a solution or managed to see if there is a Sensor recal like for many o ... Fuji FinePix A820 Digital Camera

In custom setting, assigned the front function button to display framing grid. function button does not respond when pressed. am i missing something here? thanks


Aha! While pressing the fn button, turn the main command dial (the one on the back) to toggle the grid display.Personally, I like having the grid, and used custom setting #D2 to turn it on the first day I had the D90. This frees the fn bu ... Nikon D90 Digital Camera with 18-200mm lens

The menus of my Lumix FZ10 are displaying in strange way. When I buy the camera (3 month ago) the menu display as seen on the manual. It whas OK , but now I habe a curious menu with only very few functions.


It's likely that there are settings on the camera that change the menu style - my Panasonic lets me reorganize the menus and change the way they look.Here's the manual: ... Panasonic Lumix DMC-FZ10 Digital Camera

I have a nikon d3100 purchased a month ago, the screen is not displaying the image, the live view function as well as video recording is not functioning, the creen is blank even though the menu display is alright. The memory card has been replaced and checked but no improvement


Hi\015\012According to your description your camera main pcb defective. \015\012You should send it to NikonUSA.\015\012http://www.nikonusa. ... Digital Cameras

Camera: Canon Power Shot A85 Problem: Menu Button, Function Button and Omni Selector are not functionning. Everything else is fine.


Check the battery life ,remove the battery for some then put it back check the battery life and see if u can change attime this affects the menu keys,if the problem contines let me knw ... Digital Cameras

DSC-W90 GOT WET AND NOW POWER BUTTON DOES NOT FUNCTION BUT CAMERA TURNS ON WHEN YOU PUSH THE MENUE BUTTON!!


It got wet and you are asking for help to fix it? maybe go to a nearby swimming pool, dunk it there for five hours and see if it works. ... Sony Cyber-shot DSC-W90 Digital Camera

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho


I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera

Camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse outside. You can faintly see the pictures I took in the LCD display. Now the LCD display is totally black. What's wrong. The menu display still works. What can I do?


Time for a new Camera. It is about 150.00 to replace the LCD. it is cheaper to replace it unless you can just use the viewfinder alone!! ... Kodak EasyShare Z612 Digital Camera

When turning on my Panasonic Hx-DC1 camcorder there is no Menu. Pressing the 'Menu' button does not display the menu options.


It's likely the ribbon cable on the main board is dislodge, you need to take the whole unit apart, if your carefull its not to bad to disassemble, you need to take out the side panel, under the power board, the one with a big black capacitor, you nee ... Digital Cameras

Coolpix L5 was functioning perfectly until today. Now it boots normally, focuses normally when the shutter button is partially pressed, but does nothing when the button is pushed all the way down. It will not shoot stills or video or even self-time a still shot. It behaves exactly as if the actual shutter release button is broken and doesn't make contact at the full pressed position. New batteries, memory card, resetting default menu settings--none of these help. It's running firmware 1.0.


ARe you sure that it is not stuck in playback mode? \015\012Here is a list of firmware and yours is not listed:\015\012 ... Nikon COOLPIX L5 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1178 seconds