Having problems with your Sony Cyber-Shot DSC-P100 Digital Camera ?

I have a sony dsc- p100.when i turn it on the lenses seems to want pop out but it does not.it will not open either.the screen tells me that i have to turn off the power and on again.evendoing this i get the same message again please help me thank you.


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Regards
Andrea
Repair Help & Product Troubleshooting for Sony Cyber-Shot DSC-P100 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a sony dsc- p100.when i turn it on the lenses seems to want pop out but it does not.it will not open either.the screen tells me that i have to turn off the power and on again.evendoing this i get the same message again please help me thank you.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-Shot DSC-P100 Digital Camera

When I recently turned on my camera (D-630 Zoom) to take a picture, I got the message titled Card Setup, with two options "Power off" and "Format". I turned the camera off, took out the memory card (1GB) and put it back in, as I did the last (and only) time this happened, about two years ago. But it has not worked, and I have been getting this message with the two options for a few days. Any ideas? Thank you.


If this exact card has worked in the camera before, chances are it has gone bad. Typically, if the camera says to format the card it is because it does not recognize the card. The only reason this would happen is if the card is unreadable from malfun ... Olympus D-630 Zoom Digital Camera

Canon A400 Hi, I have the above camera (canon power shot A400) and have just solved the E18 error by tapping the plastic A/V out cover - THANK YOU ! However, now, although the camera turns on, lense extends and I get full working order - after a few minutes I get the message 'Change batteriers'. and the camera dies. I have now put in several new batteries (including the little(cr1220) but the same message keeps coming up and the screen and the whole thing dies after a few seconds. Is this a furt


Having using standard LR6 batteries in a Canon before you will only get 3 or 4 pics max before it drains the batteries. You really need high power AA's like 2300mAH+ rechargeables for any good performance or Lithium AA's ... Canon PowerShot A400 Digital Camera

When I turn on my camera, It tells me Lens error and that I should restart my camera. Don't know how to restart it except turn it off and I get the same message. The lens doesn't go back in when I turn it off. Pleasr help. I have a wedding this weekend thank you sue


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon Powershot A2000 IS Digital Camera

When I turn on my camera It tells me Lens error and that I should restart my camera. Don't know how to restart it except turn it off and I get the same message. The lens doesn't go back in when I turn it off. Pleasr help. I have a wedding this weekend thank you sue


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon Powershot A2000 IS Digital Camera

When I turn on my sony cybershot dsc w17 it tells me to turn the power off and on again. When I do so I get the same message again. All I can do is view past photos, but can't take any new ones. The instruction manual suggests there could be a problem with the lens. Is there anything I could try?


OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Sony Cyber-shot® DSC-W17 Digital Camera

Error message When camera turned on, I get "Turn the power off and on again"with a beeping sound. I am unable to take any photographs. I've tried changing the memory card and insetting a different formatted card but the same outcome as above. Please assist? Many thanks. Nigel


I used some compressed air to blow around the camera lens opening. I think there must have been some dust there during our trip across the Simpson Desert which was the problem. ... Sony Cyber-Shot DSC-T3 Digital Camera

My cyber-shot DSC s600 tells me to turn off the power and turn it on again. Doing so only gets me the same message?


This is a specific lesn problem. the camera have this problem when it fails to open the lens.In this case you must replace the lens. a target for replacement costs \015\012about 30 euros. Replacement is a complicated thing but it is possible , if \0 ... Sony Cyber-shot DSC-S600 Digital Camera

Hi. When i turn on my camera, it appears on the display a message that says, turn the Power off and on again... Please tell me how do i reset it like brand new, cause is not working. Thanks. Sergio Orozco.


Your camera has a lens error, this\015\012 is such a common fault that I hope you don't mind me pasting my stock \015\012gen ... Sony Cyber-shot DSC-W50 Digital Camera

Sony DSC-W80 Each time I turn the Camera on I get the message" Turn the Power Off and On again" This does not solve the Problem,nor does it help to remove and reinsert Battery . Do you have any suggestions? Thank you [email protected]


Hi,There are a number of things you can try:1. Ensure batteries are fully charged2. Look carefully between the lens and the camera body for any sand or other dirt etc3. Try turning the camera with the lens facing down an ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

Sony DSC-N1 My Sony DSC-N1 Camera is giving me problems.When I turn it on the lens moves in and out three times then I get a display message telling me it cannot access data. Anyone have any idea what might be the problem. Thanks


I had the exact same problem, from reading various different articles it sounded like the problem was lens guide pins being out of position. When the lens was extended when tuned on, I held it open and twisted slightly, a slight click was heard (the ... Sony Cyber-shot DSC-N1 Digital Camera

Can anyone tell me how much it costs to have my fx12 serviced? The lense won't open and I get the message to turn the camera off and then back on again. Thanks -Cindy


You should phone a local repair shop or Panasonic service center. If you're not against sending it to Latvia, I can offer ir for 25$.Tom ... Panasonic Lumix DMC-FX12 Digital Camera

I have a Sony CyberShot DSC-W55. When I switch on the camera, the lens goes in and out a few times and I get the message 'Turn Power Off and then On' When I press the playback, I am able to view the images stored in my card. What is the problem? Thanks


The part which comes out when the power is on might have got stuck .. there may be some dust particles. just blow over it or vaccum it.. ... Sony Cyber-shot DSC-W55 Digital Camera

I am getting this message on my EOS 450d, (camera's built in flash pop up was obstructed turn the power switch to off and on again). I have done this several times the flash wont pop up - can you please help me?? Thank you :)


Sometimes the pop-up flash on the EOS range of cameras can get stuck. The EOS family have a very tiny micro switch under one blade of the flash hot-shoe.Get a toothpick and manually pop the switch. It should clear your error, too. ... Canon EOS 450D Digital Camera

No display for taking pictures. I get read out info for settings, can review previous pictures taken and a message telling me to "Turn the power off and on again." I have done this several times still is not working.


It is lens problem it need to be service. ... Sony Cyber-shot DSC-W200 Digital Camera

When I turn the power on my Sony DSC-P200, a message comes up "access" which fades out. Then it clicks several times and then another message pops up saying "turn power off and on again". I get the same sequence when I turn it off and on again. Any suggestions on correcting the problem?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Sony Cyber-Shot DSC-P200 Digital Camera

Lumix DMC-ZR1 When I turn the camera on, I get a message telling me to turn it off and turn it on again. It does not focus, and the EZ zoom shows all the time whether I press the button or not. I also get a "system error ( focus) " message.


This is a lens mechanism fault. USe can of air and spray on surrounding the lens For cleaning the dust. and then try. ... Panasonic Lumix DMC-FZ28 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

I have a Sony cyber-shot dsc-w30. When I turn it on the lens goes in and out, I get a message on the screen saying "access" then I get a message saying "turn power off and on again".


Sony maks good products and stand behind they product, but they do have a problem with the batteries , change the battery and i bet u will not have that problem ... Sony Cyber-shot DSC-W30 Digital Camera

Fuji finepix a400 camera. When I power it on I get the 'date/time not set message'. I can set the date / time and all in well until it is turned off overnight. It has new batteries installed and I get this message even with an external power supply attached. This is most annoying.


I would suggest going to the fuji website to download the latest firmware driver and update the firmware on the camera. ... Digital Cameras

We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(


Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?


I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera

When I turn on my camera I get a error message that say "Turn the power on and off again". My lens appears to be stuck and won't open. I believe this is the source of the problem. No matter how many times I turn it on and off I can't get any results. What should I do?


Hi, If you've recently dropped the camera you may have lens damage that is causing the camera to shut down. If you haven't dropped it, your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside th ... Sony Cyber-shot DSC-W50 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3725 seconds