Having problems with your Sony Cyber-Shot DSC-P52 Digital Camera ?

My camara lense cover does not get close and when i open it sat giving noise asking to switch off and then on .I changed the battaries,but no use.please help

Answers :

The best solution is to send the product back to the manufacturer for repair or replacement. If you have a receipt for the product and its within the warranty period (1 year) they will do this free of charge. I can help you with the process.
Repair Help & Product Troubleshooting for Sony Cyber-Shot DSC-P52 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My camara lense cover does not get close and when i open it sat giving noise asking to switch off and then on .I changed the battaries,but no use.please help

The best solution is to send the product back to the manufacturer for repair or replacement. If you have a receipt for the product and its within the warranty period (1 year) they will do this free of charge. I can help you with the process. ... Sony Cyber-Shot DSC-P52 Digital Camera

Shutter problem hi! My camera DSC-P52 , which is a year old, is giving me some strange problems. When i switch it on , the shutter doesnt open completely and makes a weird crackling noise and then beeps a few times and it says on the display to shut down and switch on the camera again. And then if I point to setup and switch it off it closes. Any solutions. please help. thanks anshul agrawal

I have the P51 (2MP) and lens cover also gets jamned opening and closing most of the time and gave same message as yours. The camera was out of warranty and my Sony dealer said it was pointless reparing it as it would cost half the price of a new (an ... Sony Cyber-Shot DSC-P52 Digital Camera

Hi there We have a Canon Powershot A570IS digital camera, about a month old. Since changing the batteries once, the camera "low battery" warning light blinks every time the camera is switched on, and then it just cuts out with a "change the batteries" message. The new batteries are fine. They have been checked with a voltmeter and are giving spec of 1.5 V each. Any ideas? Thanks for your help Andrew James, Wantage, Oxfordshire, UK

Here are some simple things to try first for a camera that won't power on properly. They won't work for every case, but they're worth a try:\015\012\015\012 ... Canon Digital Cameras

Not really sure if this is a problem? I have an Olympus E-500 and E-510. When I changes settings on the E-500 (ISO, White Balance, Auto-Focus Mode etc.) it remembers them when I switch it off. The E-510 doesn't. Is it supposed to work this way or is there an obscure setting I need to change? It remembers the time and date and the quelity settings ok. Thanks in advance for any help you can give me.

If you are shooting in the Auto mode and make the changes when power the camera off it will reset back to factory defaults. If you change the dial to P mode, make those same adjustments and power the camera off and then on again it should maintain t ... Olympus Digital Cameras

Lens error When I switch on my Exilim Z-500, the zoom extends only half way of what it used to and there's some cracking noise as if something was blocking it. The zoom is at maximum, i.e. when I zoom in further it goes to digital zoom. But when I try to zoom out, it gives me another cracking noise, a lens error message and switches off. I can't take any pictures because the zoom setting seems to be totally messed up. The image is all blurry - at any distance. I partly disassembled the camera a

The lenses are mounted to cylinders and the outside of the front cylinders have pins mounted to them. The pins ride in little tracks that move the front one in and out. The cylinders rorate with a motor and gears. You could have damaged gears or the ... Casio Exilim EX-S500 Digital Camera

Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford

If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera

From the start, the camera has been very heavy on batteries, both rechargaeble and non-rechargeable. I am told that this camera is known to have a fault. Is this so? As per my previous mail, when switching on I can access old photos, the shutter button does not depress, the screen goes blank and the camera switches off. I have changed batteries many times. Sometimes doing so gives me three or four more shots before it switches off again.

... Konica Minolta DiMAGE Z3 Digital Camera

Can you please, please help, my beloved Canon Power Shot A75 (purchased in 2005 in France) has developed a LCD display problem when turned on. A few months ago the screen distorted with lines and now the screen is totally black. I am asking you for help as I had no luck to find anyone here in France to give me any help or support. Thank you. Looking forward hearing from you. Best wishes

This is most likely a CCD problem that is being repaired free by Canon. I don't know where the French repair center is but you might find it on the internet. For more details about the free repair, go here: ... Canon Digital Cameras

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would

Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera

The flash on my Nikon D3000 won't pop up (regardless of the setting) and when I go into "Shoot" (from the guide menue) and then into "Easy Operation" the camera is set at No Flash but I'm not given the option to change the setting and says "The camera is now on "Auto No Flash Mode" but doesn't give me an option to change the setting there either. Can you help?

... Nikon D3000 Digital Camera

No pwer I have this unit and seldom used it. one time when i am going to use it, it does not switch on even i put a new battery. kindly help me with this problem. and if possible, give me a location of your service center in our country(Philippines). I search the net and was not able to find service center in our location kindly help.

What type of battery are you using? Do you have the right battery setting? The camera's battery setting is set to "Coolpix" as the default (the original batteries it came with). If you're using regular alkalines, be sure to change this se ... Nikon Coolpix L11 Digital Camera

I get noise from the lens while zooming and at the time of switch on and switch off. Somebody told me that it was problem of gears and it will cost Rs. 1800 .Is it so? please help.

If the pictures are ok, stop worrying. Some cameras make more noise than others. ... Samsung SL202 Digital Camera

Thought the batteries in my camera were flat, changed them and as I switch on its just makes a beeping noise but does not switch on. I tried another set of batteries as well.

HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Samsung Digimax S500 Digital Camera

Hi, When I switch the camera on the lens pops out and it makes some noises, then the lens goes back in and the camera switches off. It works ok. if you just want to look at images by pressing the green arrow button, please help

Your camera most likely has a lens error, this\015\012 is such a common fault that I hope you don't ... Casio EXILIM ZOOM EX-Z600 Digital Camera

I am getting a prolonged grinding noise when i turn my panasonic dmc-tz1 on this varies in time length as i switch on and off also seem to be getting a lot of blur that i didnt have before as i only get the noise when dial is in taking photo mode and not playback i assume its something to do with focus / shutter any help appreciated .

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-TZ1 Digital Camera

When switching the power on, the green light goes on, the lens comes out, then there is a buzzing/clicking noise. The lens then goes back in and it switches itself off. Help please!

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Casio EXILIM EX-FC100 Digital Camera

Model:DSCW55 switch on and no view on screeen, the word ACCESS appears on screeen, and after some time the camera asks in words to be switched OFF and ON. Photos in the camera can be viewed and also down loaded to my computer. Have also in Menu re FORMATTED, no result. Also have removed the battery and replaced. no change ???

Hi,This is lens mechanism problem that does not send initialize signal to system control chip because of defective sensor for some reason.System control chip will try three times to extend and fold lens mechanism then give up with "turn p ... Sony Digital Cameras

My panasonic lumix fz28 gives me an error saying "Error in O.I.S." and "please switch off and switch on the camera". It still takes pictures and all the features are fully functional, after the first picture the following messages mentioned above are displayed. Can you please help me with the issue? The camera is a few months old and has never been manhandled or dropped,it seems to have developed a problem overnight.

This error is for the optical image stabilisation. \015\012\015\012Generally the camera should be ok after your turn it on and off again. The error you are getting is because either the OIS has malfunctioned or is stuck.I thi ... Panasonic Lumix DMC-FZ28 Digital Camera

Lens error I have a Canon Powershoot SD1000 and it was working fine until one day the lens stopped retracting. Now it doesn't retract and I get a Lens Error, Restart Camera message. I looked at other websites to get help and tried some of the ways they suggest to fix it. Not sure if its working, because it still gives the same message and makes a noise sounding like its trying to retract then gives me the Canon welcome picture. I've only had this for a little over a year and would like it to be

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon IXUS V2 Digital Camera

Canon powershot s500 will not switch to playback mode when I push the switch it doesn't change the mode always in shooting mode Help

... Digital Cameras

My daughters olympus FE190 when switched on asks you to Format or Power Off. If you choose Format it switches itself off and if you choose Power Off is then gives you Card Error. Does this mean the Picture Card and she needs to buy a new one??

The largest xD card which can be used in this camera is 2GB. If the card is larger than that then it wont work. This camera has both internal and card memory. Try using the camera without the card or with a smaller card. ... Digital Cameras

Color problem The same issue as the one who asked about the color problem. We bought this Olympus FE-280 Digital Camera March 2008 i think. It started to have this color problem last month which is April. The problem is whenever I turn on the camera the screen has this red violet color and it doesn't capture good photos. What do you think is the problem? How can I solve this? I already tried removing the battery and the memory card and tried changing the settings but still it never changes. Help

Try to see if a filter is activated like magenta ...look in the menu if there is a reset settings feature...Usually it is in the main menu..one that reset it to the factory settings ..there can not be any other thing but something from the settings a ... Olympus FE-280 Digital Camera

I have a Canon Powershot A550 and I recently dropped it on a night out. Since then, now matter how many times I have changed the batteries to fresh Alkaline batteries, the camera tells me to "change the batteries" when I turn it on and then switches itself off. Please can you help me?

The internal connection is damaged or circuit board is damaged . You try to tap on the sides of camera and check whether the message is disappeared . Also possibility that battery contact is damaged so try giving power to camera through p ... Canon Digital Cameras

I insert a new battery and go to a party. I switched on the camera and after some time the camera asks to change the battery and turned off. Change the battery and the same thing happens. The camera worked perfectly for two years.

If you've recharged this battery many times over the past two years, it may be at the end of its useful life. Always run the battery down before recharging to extend its life. Also, don't ever let it completely discharge by leaving it for a long time ... Canon PowerShot S3 IS Digital Camera

I was taking pictures and was switching between different shooting modes; on the manual mode when i was changing exposure settings, suddenly a msg came on the centre of the screen saying 'Access...' and then is just not going. All the buttons of the camera have stopped working other than the playback and power button. Switching it on and off, taking battery and sd card out and restarting were the kind of things i tried but no luck. Please help.

Semiconductor chip for manual control may have over heated. Try using DC power supply to room temperature anneal the chip.Turn on playback for a while, until the camera does not heat up. And then try batteries fully charged to see if the chip can be ... Sony Cyber-shot DSC-H9 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2970 seconds