Having problems with your Sony Cyber-Shot DSC-P52 Digital Camera ?

Shutter chatters when turning on,but does not open all the way. Prompter says turn power off then on.


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Sony Cyber-Shot DSC-P52 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Shutter chatters when turning on,but does not open all the way. Prompter says turn power off then on.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Sony Cyber-Shot DSC-P52 Digital Camera

LENS PROBLEM Lens keeps zooming in and out when I turn it on. After 4 times, the lens goes back in and it says on the screen, "Turn the power off and on again". Then it does the same thing when I turn it off and back on. Also, the shutter is not closing however it's also not all the way open. Almost half way but more open than closed. Please help!!!


The slightly open shutter is the reason for this problem. Thank God you mentioned it. \015\012Solution: Try with your fingers to shift the shutter “blades” back and forth to see if they move freely. If they do no move freely it maen ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot

My Friend dropped my DSC-W30 camerashot on brick floor (it was nocked off a not very high table) and now when I try to turn it on.. the lense just comes out then half way in then out.. (it looks liek a confused robot) like no joke. and all the screen says while it is doing this is '' Access '' and after a min or two.. it makes this beeping sound and the screen says '' Turn the power off, and on again '' ? i tryed it.. it continues the same rutine. Please help? my father gave this to me as a gift


Try Power Resetting the Camera.First, please turn OFF the Camera.Then, remove the battery pack from the Camera.Then, press and hold the POWER button on the Camera for 30 seconds.Then, reinsert the battery pack and check whethe ... Digital Cameras

My Friend dropped my DSC-W30 camerashot on brick floor (it was nocked off a not very high table) and now when I try to turn it on.. the lense just comes out then half way in then out.. (it looks liek a confused robot) like no joke. and all the screen says while it is doing this is " Access " and after a min or two.. it makes this beeping sound and the screen says " Turn the power off, and on again " ? i tryed it.. it continues the same rutine. Please help? my father gave this to me as a gift for


Unfortunately the camera is non repairable short of dropping it again in hopes it jars the auto focus alignment back into position. this is a one in a million shot , but what have you got to lose. ... Sony Cyber-Shot DSC-S90 Digital Camera

When i turn my camera on the lens keeps going in and out and then stops when it like half way out and a message on the screen says to turn power off an on again. But that doesn't do anything, it will turn off and then do the same thing when turned on. What's wrong?


Hi!The focus is stuck - could be sand or something. I work in a Sony service center and repair these every day. It will be quite expensive at Sony service center so I would recommend you contact a local repair shop.Tom ... Sony Cyber-shot DSC-W70 Digital Camera

I have a Samsung L100. Its only a couple of months old and its never been dropped or damaged. When I turn it on, the power button turns blue, the lens opens, then it beeps two or three times and the shuts down - except that the blue light stays on. You can't use it and it you can't turn it off all the way without pulling the battery out. The screen doesn't light up or anything. The camera is totally useless now. I've found a few reviews online that say theirs do the same thing. Is there a


... Digital Cameras

My camera will not turn on. the screen says turn the power off and on again. the lens will not close all the way.


Please remove the battery and then, press and hold the power button for 15 seconds. then, reinsert the battery and check . if the issue still persists, SERVICE is the only option. ... Sony Cyber-shot DSC-S980 Digital Camera

My Sony Cyper-shot 7.2 digital camera - the lens will not open all the way, it makes noises when I turn it on like it's stuck and it says Access and then to turn the power off and on again. Nothing is working? Help!


Hi,\015\012 The message "Turn off the power and on again" appears when the lens block assembly start malfunctioning, Therefore you have to replace the lens block assembly.\015\012Thanks for using fixya. ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot

I have a Canon Power Shot SX120 IS camera. I turned it on and the lens open a portion of the way and I got an error message that say, "Lens Error Restart Camera". I put fresh batteries in it this morning and have only taken about 10 pic's. I turned the camera off and removed the batteries then replaced with new ones but I still get same message. Please advise if you can.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SX100 IS Digital Camera

I have a sony DSC-W150 and the camera turns on but it says "for use with compatible battery only" and then turns off. I talked to a sony representative and they told me to take the battery out and then hold the power butter for 30 seconds but that didn't work. They told me that it is probably the firmware and said it would cost over 200.00 dollars to get it fixed is there any way I can fix this myself? What else can be the problem?


I just bought a Canon Camcorder that has some sort of code that won't let it charge up while in the camera and plug in to the house outlet, unless it is made by Canon. Maybe Sony is doing the same thing. A new Sony battery goes for $40 to $50. Cheape ... Digital Cameras

When I turn my camera on, the screen remains black and says turn power off and on. Upon doing so, when i turn it on again, it begins beeping and says turn power off and on. But if I go to the view pictures screen and back to the "take" picture screen the screen just stays black and says turn power off and on


Hi, \012 \012 Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolv ... Sony Cyber-shot DSC-M2 Digital Camera

Lens Error When I turn the power button on -it beeps & the green light blinks then it says lens error, restart camera-but It will not restart & the lens is 1/2 way out & will not go back in. please help-need camera Thanks ,Penny


Here's some things that you can do to try to correct it. They only seem to work for less than 50% of the lens errors, but if the camera is out of warranty, they're worth a try:\015\012 ... Canon PowerShot A560 Digital Camera

Flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :( flash broken,lens stuck i turn it on and the camera clicks and it sounds like the lens is detached from what useed to move it. its says "acess" then black screen then "Turn power off and on." i think its forever broken.. :(


I have the same problem...so do you think that it's so expencive to repair?? ... Sony Cyber-shot DSC-W55 Digital Camera

Sony DSC-S600 Sorrry! What happens is this:- Turn camera on,Cybershot screen opens up with musical jingle then it will say "Access" then another screen opens up saying "Turn power off and on again". Sometimes you don't get the "Access" and it will go straight into the "Power off and on again" screen. Tried this - no good. Changed batteries for fully charged brand new 2700mAh NIMH - 1.2V Uniross - still no good ! Any advice would be appreciated. Regards


If you have a memory card in the camera, take it out before turning the camera on ... Sony Cyber-shot DSC-S600 Digital Camera

When you turn power on, the screen says "access" the lens move in and out and then it says"turn the power off and on again"


Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: rem ... Sony Cyber-Shot DSC-S40 Digital Camera

When turning on power lcd says acess ,lens opens and closes . then lcd says turn off power and on again.also little orange light indicater at eye viewer flashes.sony cyber-shot dsc-w30.


I had the same problem. Your focus is stuck.Try to free the focus from whatever (sand, dust, etc.) by hitting the camera. Start gentle, and if it doesn't work, hit it hard...the DSC-W30 is very rugged , that was my experience!Greetings fr ... Sony Digital Cameras

When I turn the power on it says access on the screen and it says to turn the power of and on again.


Hi, \015\012\015\012If you've recently dropped the camera you may have lens damage that is causing the camera to shut down. If you haven't dro ... Sony Cyber-shot DSC-W35 Digital Camera

Powering off the camera powers off when i turn it on in pic mode ... it says "turn the power off and on again" can NOT get the camera to turn on in picture mode any more.


Lens mechanism isn't good to work properly so camera shut down the power. Try to tap the lens/ camera while power up. ... Sony Cyber-shot DSC-S600 Digital Camera

I turned the camera on, took a picture, turned it off, and now the lens won't retract and it keeps saying "turn the power off and on again" when I turn on the power.


Your problem may be due to weak/worn out batteries or corrosion on the battery conta ... Sony Cyber-shot DSC-W70 Digital Camera

When i turn on my camera it says Turn the power off and on again


Hey, my camera the dsc- w80 did the same thing. When I turned it on, the lens opened 3-4 times and then it said "turn the power off and on again".\015\012When the lens opened an closed, I pulled on it with my fingers and twisted it. I kept doin ... Sony Cyber-shot DSC-W100 Digital Camera

When i turn on my camera it says Turn the power off and on again


Turn it on \015\012take hold of the end of the lense, then pull and twist gantly you may hear it click but dont force it then turn off and on again this may solve your problem ... Sony Cyber-shot DSC-W55 Digital Camera

When I turn the power on my Sony DSC-P200, a message comes up "access" which fades out. Then it clicks several times and then another message pops up saying "turn power off and on again". I get the same sequence when I turn it off and on again. Any suggestions on correcting the problem?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Sony Cyber-Shot DSC-P200 Digital Camera

Lense problem When i turn the camera on in picture taking mode the lense does not come out all the way and if i push it again it still does not come out and then when i push the power button a third time it closes the little bit it opened... but not all the way. However if the camera is in play mode and i turn it on, the lense comes out all the way just fine... then goes back in on its own and i can view the pictures. Because of this it appears the mechanism is working fine but there is maybe


Dear jmgrev,\015\012\015\012Whenever you turn your camera on and your lens doesn't go in and out properly you are likely experiencing a lens error of some sort. Look for an error 18 or a "lens error restart camera" message. If either of t ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I have a canon power shot A530. I dropped it on the floor with the lens open.....now the lens is half way out and it wont go out all the way or close all the way. when i turn on the power it comes on then cuts off with out displaying a picture in the veiwer on the back of the camera. I am sure i need to send it in for repair, if not tell me how to fix it, if not tell me where i can take to repair it


MY LENSE IS ACTING UP...AND IT SAYS...LENSE ERROR...RESTART CAMERA..WHAT DOES THAT MEAN ... Digital Cameras

Turn the power off and on again....this is what appeared after i download some pictures to my computer for the first time. When I do this the same words appear on the screen and I am unable to take any pictures When I turn on my Cybershot DCS W90, A message sayes 'turn the power off and on again' the lens does not open and I can't take photos but can see photos stored on memory card.... what do I need to do to fix this?


I have a Sony P32. Found the answer on another board'\015\012Hit the front of the camera where the lens is on carpet a couple of times. I jars the problem loose ... Sony Cyber-shot DSC-W100 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3603 seconds