Having problems with your Sony Cyber-shot DSC-S700 Digital Camera ?

Flash wont work, settings are on for flash, and the multiburst is switched off.


Answers :

Please note that:

1. You can not use the Flash when the Camera is set\015\012to Burst or Multi Burst mode.

2. You can not use the Flash when the ISO\015\012or Twilight mode is selected in the Scene Selection.

3. You can not use\015\012the Flash when mode dial is set to Movie.

4. Ensure that the battery is\015\012fully charged and the flash is turned ON.

Please set the Landscape mode\015\012or Snow mode or Beach mode in the Scene Selection and check if the\015\012flash is working.

5. Try initializing the Camera and check if it works\015\012normally.

NOTE: Initializing\015\012the Camera will reset the settings of the Camera to the factory\015\012settings including date and time. It will not delete any data saved in\015\012the Camera.

6. Please press the Menu button on the Camera. Then, select\015\012the SETUP menu and select the SETUP 1 option of the Camera. Then,\015\012select the Initialize option to OK.

7.\015\012Try to power reset the Camera and check if it helps to resolve the\015\012issue. I suggest that you reset the Camera by removing the battery from\015\012the Camera and inserting it after 1 minute.

8. If the issue still\015\012persists then the Camera requires service.


Good Luck!!!!!!!
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-S700 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Flash wont work, settings are on for flash, and the multiburst is switched off.


Please note that: 1. You can not use the Flash when the Camera is set\015\012to Burst or Multi Burst mode. 2. You can not use the Flash when the ISO\015\012or Twilight mode is selected in the Scene Selection. 3. Yo ... Sony Cyber-shot DSC-S700 Digital Camera

The flash does not work even if the flash setting is SET to FILL ( the flash will work every time the camera is in used) I already tried to reset the settings to default but still the flash wont work my camera is olympus FE 190


Does the camera indicate that the flash is turned on? In most olympus cameras I have seen there is a lightning blot at the lower left corner of the screen. Verify that it is indeed there and let me know. ... Olympus FE-170 Digital Camera

Flash Error Hi there, bought this camera about 6 months ago. I'm intermittently getting a problem with the pop-up flash. It pops up fine, but the screen gives me an error telling me it hasn't and won't take any shots. Have to keep switching it off and on and hoping it will work again. Sometimes it's a couple of days before it works again. It will take shots when I switch the camera to the 'no flash' setting, so it does seem to be just the flash. The error says that the flash release is jamming,


The error 5 can mean that there is something blocking the flash from popping up. If it is up but still get the message then you need to check to see if the little black pin/stick that lets the camera know that the flash is up, is not stuck. With the ... Canon EOS 400D / Rebel XTi Digital Camera

The flash quit working. The setting for it to be on is set correctly....the flash just wont work


HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Kodak EasyShare Z885 Digital Camera

I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the flash it wont let me change the settings of the flash at all. Apart from this the camera lens shutter seems to be sticking when i turn on the camera it doesnt always open i have tried cleaning the lens but it doesnt seem to make any difference!


I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the f ... Sony Cyber-shot DSC-W70 Digital Camera

I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the flash it wont let me change the settings of the flash at all


Perform the following troubleshooting steps to check whether the issue is resolved.1. Remove the battery from the Camera for 1 minute. Re-insert the battery in the Camera and check if the issue is resolved.2. If the issue is not res ... Sony Cyber-shot DSC-W70 Digital Camera

Camera Frozen When I turn on my DMC-FX07 none of the buttons work. The zoom doesn't work, the menu button doesn't work, the flash settings dont work. It won't switch from current picture when in viewing mode. I have tried all the picture wheel settings and every one is frozen. I have trie pushing and holding every button and removing and replacing and recharging the battery several times. When I replace the battery the autofocus works but then it freezes (when in heart mode) with the backli


Hi,I tried Option No.1 successfully when my Panasonic DMC-FZ7K froze once:Option No1:1. Try turning the camera on with the battery inserted.2. Now remove the battery while the camera is on. ... Panasonic DMC-FX07 Digital Camera

My flash does not work it is turned but does not flash..i tried resetting to factory setting but still wont work. was working fine yesterday


Chek if you are using Auto mode, or you changed it by mistake to Program or any other mode. If this is not your case, the software or some parts might be damaged, and you have to take the camera to a Canon dealer for repairs. ... Canon PowerShot SD100 / IXUS II Digital Camera

My Pentax K10 is not working. Upon switching on,no response at all, after few seconds batt indicator show up on the small lcd window at the top. Nothing could be seen on its LCD MONITOR, shutter, auto focus and flash is working. Just like dead set except for some functions mention above are working. Help please. Thanks in advance


... Pentax *ist DL Digital Camera

Hi, my camera is a EOS 400D,my problem is the built-in flash it won't work lately since i switch to a 24x105mm lens. at first it was working, but when i tried to set it up to the different modes like the P,TV,AV etc. thats the time i noticed that it was not working anymore. it pops up but it didn't fire. i need your expertise thank you.


I read that custom function 8 turns the flash off, so I guess that should be checked first thing.\015\012This web blog talks about a microswitch in the hotshoe that may be being held down by a spring or possibly stuck or broken:\015\012 ... Canon EOS 400D / Rebel XTi Digital Camera

I have a finepix f402 and when i switch it on to camera or video nothing happens if i switch it on to review it is ok . the flash does not work either .when i go to the set up the auto on and auto off do no apper in the window


Hi,\015\012\015\012Your camera's firmware is corrupt and need to be updated. The following are available updates for your camera. These are not links. The link to these drivers are below the list:\015\012\015\012 ... Fuji Digital Cameras

I just bought a s4250 and the flash will not work not even when u set it to force flash and wont on auto in a dark room. Why?


... Fuji Digital Cameras

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.


Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

No flash tried different settings and new batteries but flash wont work


... Fuji FinePix A500 Digital Camera

Camerar says flash setting cant be changed but flash wont work


Try this, press HOME, choose Settings and then click Initialize. ... Sony Cyber-shot DSC-H9 Digital Camera

My flash has stopped working for some reason - I tried to use it yesterday and all of a sudden the camera takes pictures without the flah. I went on the flash settings and made sure it was set on Auto and then tried to take the picture again but no flash still. I then set the flash to go off on every picture but still the flash did not go off I would like to know how to get the flash working again Thanks


Either your batteries are weak or your flash is dead. ... Olympus FE-210 Digital Camera

Put a new fully charged battery in - the camera would lasted for a couple of minutes and then would not switch on. The battery works fine in an identical camera. Put in a second battery - that worked for a bit then started flashing battery problem and wouldn't switch on. 5 minutes later - it did switch on - lasted for a short time and then started flashing ERR 99, and then wouldn't switch on again. Battery works fine in an identical camera. 10 minutes later - started working again, but the Sigma


It is due to some kind of electrical contact failure. For more \015\012details and common causes of Err 99 read the following article:http://www.lensrentals.com/news/2008.12.31/canon-err99 ... Canon Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens

I have the same camera at one year old and I have the same problem. Brand new batteries and the setting on the camera were right. I don't use it daily but the last time I used it it worked fine. Christmas day and it beeps three time but wont switch on. Surprise surprise the warenty ran out last week.


Http://www.youtube.com/watch?v=TmOPab5E4bw \015\012\015\012WATCH MY VIDEO THIS MAY HELP ... Gateway DC-M40 Digital Camera

I've had my Olympus FE-340 for 3 years, and I've never had any problems with it before. Now, whenever I try to zoom in, the camera takes white pictures or pictures with streaks in them. I've tried reseting the camera, changing the battery, changing the picture card, switching settings, and turning the flash on and off. Is there any way to fix the white/streaky pictures? Or, does this mean that my camera will no longer work when I try to zoom in?


WHEN I TRY TO TAKE PICTURES WITH MY OLYMPUS FE 340 THE SCREEN JUST GETS DARK, BUT WHEN I VIEW OTHER PICTURES THAT WERE ALREADY IN MY CAMERA THE SCREEN DISPLAYS THEM JUST FINE...CAN ANYONE HELP PLEASE? ... Olympus FE-340 Digital Camera

Flash has stopped working on my Nikon D40. I've tried a factory reset, tried to get to the flash setting but that menu option is no longer available (highlighted) in any mode. I'm thinking it's broken and not a setting thing. Everything else works fine and it still takes pictures just without the flash. The flash pops up when needed but no flash obviously.


There's a common problem in the flash arm. I found this link that shows a simple repair. If you use this and make the repair yourself, understand that you will void your warranty if you have one. Also, do not touch the bulb as you'll get oil on it ... Nikon D40 Digital Camera with G-II 18-55mm Lens

Flash wont work


You need to insert a pin into the reset button on the bottom of the camera for about 15 secoinds and itll restart your whole camera and memory card froms scratch\015\012.. ... Samsung Digimax S630 Digital Camera

I bought an Olympus sp 800 uz but the flash wont work. I know it is supposed to be manual and ive pulled it up. But no matter the type of flash i choose when i press the button for a picture the flash symbol blinks in red and the camera wont take a picture. So for now it only works without flash. Anybody experienced the same problem?


... Digital Cameras

I have a Panasonic DMC-TZ1 that I can't get the flash to go off on. The only flash setting that works on my camera is no flash setting and the icon for the no flash symbol appears white. The rest of the settings such as automatic flash with red-eye, and automatic flash, ect... are red. Is this a settings issues or a repair issue? If it is a repair issue could you tell me what on the camera needs to be repaired. Weather it be the LED light is broken or a resistor or transistor on the circuit


... Digital Cameras

I have a Canon Power Shot A720. Outdoor photos are beautiful. Indoor photos are always grainy/blurry...a lot of noise. I have tried the ISP feature but there are only two choices... 1. Auto or 2. High ISO Auto Either setting, the indoor photos are grainy. Further, there are times when my flash will not work. It won't work on Auto setting or when I try and "force flash" it. No flash and the photo will not allow a picture to even be taken. Any suggestions? Thanks


This is probably the solution:\012 Wont take pictures with flash ... Canon PowerShot A720 IS Digital Camera

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t


I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3999 seconds