Having problems with your Sony Cyber-shot DSC-T10 Digital Camera ?

The LCD screen is blank (white) on my Sony DSC-T10. I have tried to follow the instructions on resets but this does not affect the display at all.


Answers :

Doesnt apply to the DSC-T10
You have to SEPTEMBER 30th, 2008 to do this!!!!!!
\015\012
\015\012This is a known issue with the cameras. go to:
\015\012http://esupport.sony.com/US/perl/select-system.pl?PRODTYPE=7&NAVDISP=di
\015\012
\015\012Enter your camera model. Go to:
\015\012Important Notice About Your Sony Product
\015\012
\015\012and follow the instructions. Sony will email you a UPS shipping label. Ship the camera back to them at their expense. They will fix it and ship it back to you for free.
\015\012
\015\012Until September 30, 2008, Sony will repair, free of charge, affected products exhibiting the above-mentioned symptom where it is caused by the image sensor device. Sony will also cover the cost of shipping and handling from and to addresses within the United States and US Territories for service to correct this issue.
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-T10 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The LCD screen is blank (white) on my Sony DSC-T10. I have tried to follow the instructions on resets but this does not affect the display at all.


Doesnt apply to the DSC-T10 ... Sony Cyber-shot DSC-T10 Digital Camera

When the camera is turned on , the zoom tries to adjust twice while the displays says" access" then it Says" Turn the power offand on again" Following the instruction does not solve the problem, we can see the images if we press play.


Hi, The error "Turn off the power and on again" shows when the zoom motor start malfunction, If you want to repair by yourself and have experience then change the optical zoom motor it will reduce your cost. Otherwise you can change complete ... Sony Cyber-shot DSC-W55 Digital Camera

I just bought a Canon 450D and followed the setup instructions, but when i take a picture nothing is displayed on the lcd and the image stored is blank? The camera is set to auto, lens cap is removed, SD cards(tried multiples) were low level formatted, battery has a good charge, flash is working.


Sounds like you got yourself a defective CCD sensor inside the camera because you should have got output on the file and on the LCD.\015\012\015\012Read the advisory from canon below.\015\012\015\012 ... Canon EOS 450D Digital Camera with 18-55 Lens

Flash Followed all instructions word for word and the flash will not work. I reset the camera to the default setting and flash still will not work. If I look at the camera and take a picture it looks like it try's to flash but just can't pull it off. What is the problem? Help me please


Well tO qet tha flaSh dere iszx an buttOn \015\0120n the CaMera \015\012u just k33p prEssiinqq it untiill yuqh qet tha tiinqqq\015\012with the flaSh tiinqq and an eye neXt 2 it\015\012=] ... Polaroid I533P Digital Camera

My Canon 5D mkI turns on ok, will focus, displays top and back, but it will not take a shot. I have two batteries, both which I have charged to full and tried (display shows full charge). I have also tried two seperate CF cards. I have tried cleaning all contacts. Still it won't take a photo. The shutter will work when I use the "clean sensor" function though. Also, I have reset all settings on the camera. Anyone know why the camera isn't firing off a shot?


Hicould you tell me the amount of shot number when you put memory card in? If yes, please move to manual position from auto on the side of lens. And try to press release button.there is other one thing you have to chack selftime release working or n ... Canon EOS-5D Digital Camera

About seven days ago bought shelf display Fujifilm S1000. Worked fine at the store. Got home, read instructions, powered up, lens would not extend, "zoom error" displayed. Camera was room temp. When switched on, camera beeps, extend motor clicks, sounds like a gear engages for a split second. Took back to store next evening, it worked fine. Next try at home, same problem. Back to store, worked fine. Tried at home and at work, still "zoom error". Again to store, worked fine. Ready to return, stil


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S1000FD Digital Camera

My canon powershot a95 display screen does not show an image when I am trying to take a picture. The image that is displayed is black with white lines and varies in the amount of black and white. No matter what setting I turn to, I can not get the image to appear. It had been working fine till a couple of days ago. It has not been dropped. I get the same result when trying to view a picture of a card. Is there any way to reset the camera?


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A95 Digital Camera

When the camera is turned on the the canon display comes on for a second, the various icons are displayed in the window, but there is no view. Just a black screen. Try to take a picture and nothing but black. I've tried resetting the default setting on the main menu and still nothing.


The problem is in the lens housing, there is a ccd sensor may be malfunctioning, or the shutter motor is seized preventing the aperture from opening which would explain the black pictures, to fix this problem, the whol ... Canon PowerShot SX 200 IS Digital Camera

I have a DSC-T10 and the screen does not display any of the menu features. It is has vertical lines across the screen. I would try to initialize it using the set-up menu but can't access it. It is not under warranty and costs to much to send it in for repair...any ideas of what I could try? I did try to reset by holding down the power button for 15 seconds while battery is out but nothing changed.


Hi,There could be 2 Reasons :-1. Bad CCD Sensor 2. \015\012Bad PanelTo Differentiate, Try to Look the Saved images or the \015\012Saved Video's. If you could see them without any Problem, CCD Sensor is \015\0 ... Sony Cyber-shot DSC-T10 Digital Camera

When I turn my Nikon D40 on, the shooting information display is on the screen. The camera will not take a picture nor can I get this display off the screen. I have tried everything- turned it on and off, removed the battery, pressed reset, etc and nothing will make the shooting information display go away.


Hi\015\012I am a camera tech. I would like to help you out. I think I told you to use toggle key on the back of camera. If not working, I need you describe more how it does not work.(can it take picture and store the picture file in sd memory card? ... Digital Cameras

Having trouble downloading music or anything to the PMP VERTIGO NS-702C MP4 Player Followed the instructions but no help. Tried to copy and paste..Click and drag..tried the windows media player sync. It sees the device but calls it Mass storage. It will show up as an f and an e drive.. f is the one that show the music folder in it. I am guessing the e drive is for a memory card.


What happens when you try to COPY and PASTE a file into the mp4 player? ... Digital Cameras

Lens error I have a canom power shot SD 1100 is I try to turn it on and a get an error that read as follows Lens error, reset camers then the camera turns off the lens is oin the open possition and have used a can of dust buster to try and blow any sand and or dirt dust out but nothing can anyone help.


The same thing happened to my camera, searching on the net for an answer and i found this. Strange, but it worked. Set your camera on a flat surface with the lens facing up. Tap it a few times and try again. Sounds silly but it worked! ... Canon PowerShot SD1000 Digital Camera

"check connections" I just got a Casio Ex-Z77 and am trying to upload my photos for the first time to my PC. I've followed the instruction manual and tried all the tips I've found online (making sure my battery is charged, checking USB ports - all the obvious stuff), but nothing works. As soon as I plug in the USB cord, the screen goes blank. After a couple minutes the screen says "check connections". The ONLY response I'm getting from my camera when it's plugged in is, when the volume on my PC


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Casio Exilim EX-Z77 Digital Camera

Locked Card Does anyone know how to unlock a memory card on the Optio W20? I follow the instructions (press 4-way controller down in play mode, select protect, hit ok) but then I don't get the same screen as what the instructions say will appear. I'm supposed to see a screen than gives me the option of protecting one image or all images, then there should be one that says protect or unprotect. Whenever I try to do this, I can only select protect, but my camera then says the card is locked - it


Try turning it off and doing it then if not then try to protect them ant take it out ... Canon PowerShot S51S Digital Camera

My canon Digital IXUS 8015 says card locked when I try to take a picture. I can access photos taken last month on the same card Today when I tried to take a photo the camera beeped and displayed to following message "card locked". I removed to 4GB card and checked the tab was set to unlock. This did not rectify the problem. The card will work in another camera. Any suggestions?.


Your\012 camera uses SD memory cards. On one edge is a slider switch: towards \012the electrical contacts is the unlocked position and away from them is \012locked. Unfortunately, the switch is easy to move a ... Canon PowerShot A530 Digital Camera

Where is that switch to reset on the memory card protection? Whgen I try to take new picture the screen shows as follows:reset switch on memory card, where is that switch?


On the card itself (the tiny slide switch on its side). There are several possible causes for "memory card locked", "memory card error", or "no memory card". Some include trying to use of a 4GB SDHC card with an older camera made before SDHC format ... Kodak EasyShare V1073 Digital Camera

My panasonic lumix dmc-fs3 will not connect to my pc so I can upload pictures. It is not my usb port because I can plug other things into it and works fine. This happens with any usb cord I try to use. Also when I try to connect it I get a message that says picture is displayed for 4:3 tv for a 16:9 setup and even though i've reset all the settings on my camera it still comes up


Start using a card reader instead of your camera. ... Panasonic Lumix DMC-LZ2 Digital Camera

Hi K akima...have followed your advice, but no luck. When I go to continuous mode, it only lets me shoot a single shot, the display briefly reads r 08 then returns to r 09 again. I've tried my other lenses ( Sigma and Nikno ) and they autofocus okay and still show the r09 in the display, but again it won't allow me continuous shots, just the one. The Sigma 120-300 doesn't have an autofocus switch, and i've thoroughly cleaned the contacts. Yes it works manually but I need auto for sports pics. Un


I get r11 but I have a blank memory card which I have just formatted. Sometimes I can take a picture - sometimes I can't. Only bought the camera a fe days ago so wonder if I have set something incorrectly in the menu. ... Nikon D80 Digital Camera with 18-135mm Lens

Could you email me the web site location for getting a free camera instruction manual for my Canon PowerShot A560. I ordered the camera on line--it was a display model. Expected to get instructions w/ it. Emailed the business I ordered it from and was told I could probably get it for free on line. I have gone throught SO many websites trying to find the one that might give me this information--worn out w/ looking--so I decided to ask for your help--Please. Sara Setzer [email protected]


Hello,\015\012Please go to following weblink and get user manaul of your camera. See in Guides and Manauls section.\015\012\015\012 ... Canon Digital Cameras

Nikon D100 When I take a shot and try to review the photo I get the message "Folder contains no photographs". The camera was disassembled to add an IR filter. I was extremely careful using a wrist strap and pad. I followed all the rule to avoid a static charge. Followed all the disassemble rules and was very careful. Is it possible I have a software problem. I went thru the manual and did all the troubleshooting procedures,,,reset, etc.......appreciate any advice. JohnK


... Nikon D100 Digital Camera

ERR message I have an err message that displays everytime i try to take a pic...i went through reset procedure and did not correct problem ..camera worked night before during a shoot..turned on next day and did not work...we dont have a nikon repair center anywhere close...i hope it something simple that can be fixed here ..it acts like its taking a pic, then message displays and goes off after about 20 sec


I'm afraid, according to the manual you have to send it in...\015\012I would contact Nikon either through their Web site or by phone. It is normally neither expensive nor complicated to send a camera in. Just pack it well to protect it and send ... Nikon D70SLR Camer Armor Smoke Digital Camera

Panasonic NV-DS27EG problem: sudden degradation in function following (though could be coincidence) first ever use of DV-out socket on camera (to connect Dv-in on Panasonic DVD recorder). First symptom: no picture displayed when attempting to play back a tape in VCR mode. Second symptom: power light stayed on even when camera switch was at the off position. Third symptom: message in viewfinder asking for the reset button to be pressed. Found and pressed reset button then: Fourth symptom: "to ser


... Panasonic Digital Cameras

Locked Card Does anyone know how to unlock a memory card on the Optio W20? I follow the instructions (press 4-way controller down in play mode, select protect, hit ok) but then I don't get the same screen as what the instructions say will appear. I'm supposed to see a screen than gives me the option of protecting one image or all images, then there should be one that says protect or unprotect. Whenever I try to do this, I can only select protect, but my camera then says the card is locked - it


Take the memory card out of the camera. Look at it carefully and you will seea small tab. Move the tab from the locked position to the unlocked position. Re-install the memory card into the camera and then you're done.\015\012EEee ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Casio T2000 I have 125 PLUs to setup in a Casio T2000 register. . I'm trying to enter a description for a PLU. When i press any of the number keys the registor beeps while "E" is displayed on the register screen. I'm following the steps from the manual. Am i missing something? There is no number associated with the "E" that is displayed.


Hi. I cannot find a T2000 listing. This is not a standard Casio model number. It might be a PCR-T2000, or maybe a QT-2000. Could you have another look at the model number and get back to me, then I can help you out?Mark ... Canon Rebel XT / EOS 350D Digital Camera

When trying to power up my JD 8.0 Z3 the green power display flashes a few times followed by three audio beeps. The display screen flashes on for approx 2 seconds and then turns off again. Any ideas ?


... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2232 seconds