Having problems with your Sony Cyber-shot DSC-W100 Digital Camera ?

Hi, I have the Sony Cyber Shot DSC-W130 digital camera - whilst away on holiday a message appears when I turn on the camera "turn power off and on again". I have done so many times but it still comes up with the same message - hence not allowing me to take any pictures. I can view existing images through the window and I can download them fine - I just can't take any new ones. There is plenty of space on the card and a full battery. Any suggestions?


Answers :

Hi. Yes. turn it on and go to the menu. find reset and reset the camera. this will return it to factory settings.
\012
\012if you can't get into the menu or if the steps above do not solve the problem do what is called a hard reset. Remove the battery, leave it out for 5 minutes and then reinstall it. J.
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W100 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi, I have the Sony Cyber Shot DSC-W130 digital camera - whilst away on holiday a message appears when I turn on the camera "turn power off and on again". I have done so many times but it still comes up with the same message - hence not allowing me to take any pictures. I can view existing images through the window and I can download them fine - I just can't take any new ones. There is plenty of space on the card and a full battery. Any suggestions?


Hi. Yes. turn it on and go to the menu. find reset and reset the camera. this will return it to factory settings.\012\012if you can't get into the menu or if the steps above do not solve the problem do what is called a hard reset. Re ... Sony Cyber-shot DSC-W100 Digital Camera

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

Hello, I have the following problem: I cannot delete images neither take new pictures. When i try to delete pictures it shows the following message: The card is locked, unlock the card to access delete features. When i try to take a new picture it shows the following message: LENS ERROR Try turning the camera off and on again (before this message it says card locked). Thanks for help!!!


Unlock the card by moving the slide switch on the side of the card. Solve your lens problem with these:\012Fixing a Lens Error ... HP Photosmart M447 Digital Camera

I'm a new user of the D90 (and digital in general), and on my first major trip with it I had problem with the shutter not working. I would take some images, put the camera down without turning it off and move on to the next spot. At the second stop the camera would not work. I'd turn it off, remove the battery, run the lens in and out and eventually it would work again. The message I got was F--, which said that the lens was not installed properly. However the lens was never removed. What's


George,Since you didn't say if this was a "new camera & lens" or if it was a "new to you" camera and lens, or which *exact* lens you have, there are a couple of ways this can work.Nikon lists the following remedy for error ... Nikon D90 Digital Camera with 18-105mm lens

Dead my camera has been fallen down from a small height.and then the projected part of lense is not going inside the body.i think the ring inside its not working.i can power on and off the camera and can play the already taken images and videos.but when i click to take a new snap its showing an error message like "turn off the camera and try again".


That is a mechanical problem due to the shock. The lens assembly must be taken apart and re-assembled.Try first pushing gently the lens with your finger, or tapping the back of the camera while you start up the camera at the same time. ... Sony Cyber-shot DSC-W35 Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

I turned the camera on to take a picture and got a message on the screen that said "error reading memory card." and it says now there are no images on the card, and there were images on it.


Download any pictures still on the card using a cardreader. Then, format the card in the camera. ... Canon PowerShot A520 Digital Camera

T1235 camera - battery is fully charged, but lens will not extend and camera can not be shut off once it is turned on. I have to take the battery out for it to shut off. The LCD screen shows blurry image of what is seen through **** in lens cover. No error messages are shown.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Polaroid t1235 Digital Camera

I am using Olympus Evolt-e-300 dslr for the last 4 years until recently occurs a problem,after taking a shot,black screen with message D:3C85 appears and read/write lamp with red light blinks continuously till camera was turned off and again on,although image was record I update the camera firmware through olympus website but to no use,it is still there,I also check the memory card it is perfectly fine(Sandisk Ultra 4GB 30mb/sec read/write speed) please advise what to do???


Hi,This is a common problem and discussed many times in different forums.This issue has been there for a while. This problem is related with the shutter and gear assembly. No doubt you would see many threads where either firmware update o ... Digital Cameras

S400 memory card error. Turn on camera - display "NO IMAGE MEMORY CARD ERROR". Can not take pictures, can not display pictures. Have several memory cards - same message, different cards. If the camera can be fixed who can and where should it be sent.


The internal BIOS battery has run down and is causing this error. Don't attempt to fix this yourself. Canon will fix this for you for free, with free shipping, regardless of your camera's warranty status. See and print out the following advisory: ... Canon PowerShot S400 / IXUS 400 Digital Camera

Panasonic Lumix DMC-LZ2 Image 'melts' into streaky vertical lines when camera is turned on. This problem started occuring immediately after I found my kids deliberately turning the camera off while jamming the lens cover open, so they could get the 'turn camera off and then on again' error message (yes, I know - they've been banned from touching it again). I confiscated the camera, turned it off and it sat unused for about 3 days. When it was next turned on, the image on the LCD screen was


... Panasonic Lumix DMC-LZ2 Digital Camera

My camera was drown in swimming pool, then i immediately remove the battery and the sd card.. then i wipe out the water.. then i put my camera under the sun to dry up.. then i try to turn it on, it does. but i cant take pictures its totally no images.. when i went home i place my camera in front of electric fan to dry it more.. then luckily when try to turn it on again, its ok.. but when i take a shot i saw images but its blurd already... i still see some water in screen.. then i took my came


Bad news if your camera isn't wheatercamera, the problem you are experiencing at the \015\012moment, is a typical result of a CCD which have blown. A CCD problem would explain the lines on your pictures and the lines on the L ... Olympus FE4020 Digital Camera

I have a new (Dec., 2009) D90. This morning I discovered that I had an "Err" message and a "CHA" message. Both were on the LCD panel on the top of the camera. I was not able to turn the camera off, and the only way to turn it off was to take out the battery. Upon reinserting the battery, everything appeared normal, but after taking one shot the problem reappeared. The interesting thing was that I took the camera body to a Nikon certified shop in New York, and they tried it with a different lens,


The Nikon user manual says on Page 256 that the ERR message indicates a camera malfunction and to clear it, you must release the shutter. \012\012 I have found on my D-90 that I can usually release the shutter by turning the camera off and ba ... Nikon D90 Digital Camera with 18-105mm lens

When i take a picture it works fine..but then i try and take another picture and it appears the whole functions of the camera is locked up..cant do anything..however the screen still shows a image.. to take another picture i need to turn off and turn on the camera again and then it will only allow me to take one picture then i have to turn it off and on again.. please help with this problem...im sure its something simple but it is very frustrating thank you


Firstable go on to your camera settings try looking around for the problem if this does not work get it repaired hope you have warrenty if you don't itll be a little expensive so goodluck:) and please rate this solution...\015\012But if this do ... Digital Cameras

My cannon rebel will not take picture or go to the menu the only thing it will do is turn on. And when i turn it on a message pops up that says "shooting is not possible. Turn the power switch to off and on again or re-install the battery." I have tried turning the camera on and off and reinstalling the battery multiple times but nothing works. Do i have to take my camera to a camera shop to get fixed or could i do something at home to fix it??


I think either shutter unit or cmos unit faulty. you cant fix at home you have take to canon repaired centre ... Canon EOS Rebel XSi Digital Camera

Blurry images I purchased about a year ago a new Panasonic DMC-TZ4. And up until this point, I was in love with this camera. However, just recently, sometimes when I turn the camera on, the screen is showing images to be out of focus and blurry. All the settings are correct. Some times it stays like this for hours. Other times, I can turn the camera off and then back on and the blurriness goes away. Twice the camera has frozen and I had to take the battery out. And some times when I turn the cam


Sounds like a lens problem. If you've ever let the camera "auto turn-off" as a power-saving measure, any button pushed will turn it back on...even if it's in a case or your pocket. This puts strain on the lens as it tries to come out...result....lens ... Panasonic DMC-TZ4 Digital Camera

I appear to have lost all my holiday photos due to a crash within the camera when the memory was reading full. Although the camera is not recognising any images on the card It still has a message saying memory full. I have tried to copy the images within the camera memory onto the apparently empty memory card but again the message comes up no images to copy. I know the data is there because the camera will only let me take 12 frames before it tells me that its memory is full. How can I recover t


You can try to get your images if you use an adapter for the memory card that connect to your computer then there is an application that recover files from a memory card \012\012Hope it will help ... Fuji Digital Cameras

Error Message I recharged my battery last night after taking pictures and modifying some photos. This morning I turned on my camera because I was going to tr and download pics onto computer. I plugged in cord to the camera and to the printer port (that may have been my mistake) Nothing happened, since the camera wasn't on. I turned on the camera and I got this error message (on a red screen): Camera hs experienced an error. 00000013-2F6B-FFF-298 Please reset your camera I tried the lightly smack


Tried to take pics but got msg that battery is not charge enough to take pics.  I charged the battery overnight and nothing.  I turn on the camera and the little blue light illuminates for 1 sec and goes out, still no charge.  Do I nee ... HP Photosmart R727 Digital Camera

Message Display I have a 256MB memory card for my camera. I have not taken many photos. Even at the lowest picture quality setting of 640, the camera reads that I only have 146 images to take. When I try to review what is in the camera, I receive the message "No Valid Image to Play." The instruction manual explains that the message means. However, I was not able to find anything that tells what to do to increase the number of available photos from 146 to more. This problem happened once


You should have the full instruction manual!! ... Panasonic Lumix DMC-FZ10 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Lcd blurred I have a canon power shot a80 and when i turn it on and try to take a picture, on the LCD display i see a mixture of colour which is not even letting me see the image of the picture i would like to take. If i look through the lens and take the image, i am still able to view the picture I had taken if i set the camera on the view pictures. The mixture of colours on the LCD only shows when the camera is set on take the picture... and it doesn't even do it always. Thanks.


Canon will fix this camera if it is in the list of ccd defect. Contact canon.com for the Americas, or where you are. Call Service on the web page with the 800 number.http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&am ... Canon PowerShot A80 Digital Camera

There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message


OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras

The camera powers on fine, although it has a black screen with no image. What type problem is this and is it fixable or not. When I go to look at the pictures I took while the display screen was blacked out the screen remains with no image. I just turned on my camera the other day and I can still acces my menu, I can see the camera details in the corner and even view old pictures but when I turn it on eveything else is black! I can't take any new pictures because of the black screan. Is this fi


I have the same problem i need help fixing it? ... Nikon Coolpix S3 Digital Camera

Troubleshooting problems I have a canon powershot s60. I tried to take a picture earlier and the screen is completely white. The camera turns on, the battery is fully charged and there is nothing wrong with the digital card. THe camera wasn't dropped nor did it get wet. I keep trying to turn it off and on, but all I get is a white screen. No images. But there are 900 images on the camera card and i just used it this morning. Please help. Thanks, Shannon


Take a picture with the camera and download it. If the pictures also shows up white then this probably is a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's w ... Canon PowerShot S60 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4422 seconds