Having problems with your Sony Cyber-shot DSC-W130 Digital Camera ?
Displaying this massage
turn the power off and on again
Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.
Performing a manual power reset
Turn off the camera.
Remove the battery pack.
Press and hold the power button for 30 seconds.
Allow the camera to remain without power for 60 seconds.
Reinsert the battery pack.
Turn on the camera.
To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settings 1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.
If the issue persists, service may be required.
Thanks for contacting FixYa.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
When powering up, "Sony" logo appears on display then display goes blank. Cannot power down (green light next to power button stays on after pressing power button. Thought battery needed replacement. Replaced with new battery - same problem. Purchased camera approx 1 year ago. Thx.
There is a firmware problem. The company will fix it for $50. It's fairly common now days with most cameras. ... Sony Cyber-shot DSC-H10/B Digital Camera
Lens stuck out No display No link to computer but will charge battery. Only way to power off is remove battery. Numerous key holds when power on result in no change. View lott's on FixYa. Try gentle but firm exercise of barrel, left right with success when some inward movement felt. Insert battery, power on, screen display yes, take picture yes [onboard memory as no SD installed for tests]. Will update if problem comes back. Gentle but firm is the key, good luck.
... Samsung HZ35W WB650 Digital Camera
My camera problem is :when i start or turn on the power button of camera a massage is displayed which is "Turn off the power and on again " i followed the same but again when i am turning the power on again ,same massage is being displayed in camera . camera model is :SONY DSC-W180 cyber shot please help me out soon.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-shot DSC-W180 Digital Camera
I have a Moultrie D-40 with problems. It has a bad display. It also will power up, but power off almost immediately. I assume that is a main board problem. Is there a schmatic available? Can one order the parts from Moultrie? Any idea of prices? If not, is there anywhere else one can get parts? I assume someone makes the parts for them. I'm wondering if there is a part number on the circuit boards. I would think the display would be a common item. I already swapped it out so know it's bad. OR, i
For questions regarding Moultrie products or repairs please call (800) 653-3334 or (205) 664-6700 Monday through Friday 8 a.m. to 5 p.m. CT ... Digital Cameras
When I switch the camera on power LED comes on but camera does not power up and if you flip out the display it then switches off and won't powerup whilst the display is out.
Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into ... Canon PowerShot A640 Digital Camera
When powered on, the screen displays "Access". The scroll menu displays fine, and when a new option is selected the message will occasionally change to "Turn power off and on again".
If the unit is out of warranty then there are several diy fixes that may work. Note though that anything is possible and more damage is possible to be done when trying this method, obviously the ideal way is to have it serviced by a professional but ... Sony Cyber-shot DSC-W55 Digital Camera
When trying to power up my JD 8.0 Z3 the green power display flashes a few times followed by three audio beeps. The display screen flashes on for approx 2 seconds and then turns off again. Any ideas ?
... Digital Cameras
The rear display does not come on when camera is powered on but the picture will display when a picture is taken. I believe the batteries were put in incorrectly and attempted to be powered on just prior to this symptom. Any suggestions?
Hi\015\012\015\012In many cameras there is a setting or a button that lets you turn off the preview picture while shooting pictures but still shows it to you after you have shot a picture. If you could post / confirm the brand and model of your ... Canon PowerShot SD1100 IS Digital Camera
Upon power up, display screen says 'access', lens goes in and out several times and then the camera beeps and display says 'turn the power off and on again'
Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Sony Cyber-shot DSC-W70 Digital Camera
Kodak M1093 The lens is stuck open and it will not power on. Blue power light comes on. There is no display. Battery is fully charged. I removed battery and SD card and pushed power button twice. Used on USB cable for power. Tried a different SD card. Same results. (lens is stuck open and it will not power on)
... Kodak EasyShare M1093 IS Digital Camera
Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho
I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera
My jxd mp4.mp3 player power on and display start and on display not see the icon display is blue colour whaj solution this problem?
Perhaps the micro-controller is locked up. If you can remove the battery, take it out, wait ten seconds, then put it back in. This may reset it to normal operation. If there is a reset button, try that first.If you spilled liquid on the unit, it ... Digital Cameras
Hi. I have a problem with my Panasonic DMC LZ1. Has developed a fault. When powered on with charged batteries and memory card inserted, the camera doesnt do anything on any setting except the review (arrow indicator) setting. The review setting only works if you 'power on' on this setting. (You can see photos on the memory card). If you power on -on a different setting and move the dial to review, then review doesnt work either. Neither the display (except for review as above) or lens wor
... Panasonic Lumix DMC-LZ1 Digital Camera
I have old Olympus C-840L. After connect battery power 6V and switch ON camera or display electronic then nothing does not started. It seems that problem is in power switching circuit. Battery supply 6V DC is not connected to electronic due to some part is broken. I need schematic of power supply. Please, answer me if you can help me to my e-mail. Thank you.
... Olympus Camedia C-840L Digital Camera
Camera: Sony A100 Doesn't power up from internal batter ( just blincking of power up red indicator, all other functios dead) Powers up from DC adapter Display shows "bulb" No focusing No shutter release Full access to menus Records blank image to memory card ????????????? HELP, please... with regards/Peter Bacler
... Sony Alpha DSLR-A330 Digital Camera
Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!
You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera
Panasonic Lumix DMC-Z20 took a knock, now lens gets stuck during power on, grinding noise and lens chugs back and forth for a few seconds. screen displays message "please turn power off and on again". the servo obviously still has power but it seems some part of the mechanism is struggling. any ideas/instructions on how i can crack the thing open without causing irreparable damage? (and should i try...) cheers, Ben. 0405124646 [email protected]
... Digital Cameras
Blank LCD My sony DSC T5 camera LCD display is blank. When the slider is pushed the green LED is on but screen is blank. When you try to power off the camera it does not power off, the LED remains on. Removing the battery power it off. Any guesses I am very handy at reparing electronics.
Camera of this type are not usually repairable. No Parts.Like toasters/ kettles etc they are considered 'disposable'But don't take my word for it - check out the makers support page ... Sony Cyber-Shot DSC-T5 Digital Camera
Error C:13:10, displays ''access'', ''turn the power off and on agai
Lens jams can happen without dropping the camera. The lens motor is bad, or a grain of sand has got stuck in one of the lens cogs. Either way will need lens repair/replacement. ... Sony Cyber-Shot DSC-S40 Digital Camera
Camera error Turn on camera: Turn power off and on again is displayed / if lucky enough to get to the display screen / picture is out of focus and on the screen it flashes E:61:00. Anybody have an idea? Nice camera usually. Thanks
The problem is the internal focus lens is either stuck, or knocked out of alignment. The lens will need to be serviced, or replaced with a new (not cost effective), or good used lens assembly. ... Sony Cyber-Shot DSC-W1 Digital Camera
No power Camera will not power on. I've tried new batteries. will not charge from camera dock. Dock is operational with my other camera. From the dock, the green light will occasionally come on and the Kodak logo displays, but then goes out. I'm bummed. I love this camera!
Not sure if this is related, but our's won't start-up either, and it seems to indicate that the batteries are weak/dead prematurely. There must be some sort of power level controller that could be the root problem.\015\012\015\012Our experts can add ... Kodak EasyShare DX6440 Digital Camera
When i try to take a picture nothing happens, the power is on fresh battery, the display window on top of camera blinks fEE and 279 blinks when i push the trigger to take a photo, when i hit display it says folder empty no images, please help
Well there are some cameras, if you press it half way, it shows you some things, and when you press it fully, it takes the picture.Make sure that you are pressing the button all the way.Also, try to reset the settings by press ... Nikon Digital Cameras
I have a canon power shot A530. I dropped it on the floor with the lens open.....now the lens is half way out and it wont go out all the way or close all the way. when i turn on the power it comes on then cuts off with out displaying a picture in the veiwer on the back of the camera. I am sure i need to send it in for repair, if not tell me how to fix it, if not tell me where i can take to repair it
MY LENSE IS ACTING UP...AND IT SAYS...LENSE ERROR...RESTART CAMERA..WHAT DOES THAT MEAN ... Digital Cameras
I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem
You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras
Canon powershot a310 shutter slide open, black display. shutter slid closed and camera powered on, will display photos.
... Digital Cameras