Having problems with your Sony Cyber-shot DSC-W190 Digital Camera ?

Hello, My Sony Cyber-shot DSC-W190 got wet and when I try to turn it on, basically the lens does not open it sounds like the camera is clicking as if it is struggling to turn on. Then the message on the screen reads, "Turn Power off and on again".. Once the camera dried, I was able to view my pictures but I can not take any pictures or videos.


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Aunsoft MTS/M2TS Converter helps you convert MTS and M2TS video files to MP4, MPG, WMV, AVI, and enables you to enjoy movies on computer or WMP, to further edit video for creation, to present video on HDTV, and to publish video online in web-friendly format. It makes your AVCHD camcorder videos editable on Adobe Premiere, Sony Vegas, Window Movie Maker, DVD Maker.

With this AVCHD camcorder converter, you can load videos from JVC, Canon, Panasonic, Sony camcorders. You can also control your video and music on popular portable devices including iPad, iPhone 4, Nexus One, HTC Hero, Motorola Droid X, Droid 2, Xbox 360, Zune, iPod, PSP, Creative Zen, Apple TV, iPhone anytime anywhere; or convert MTS/M2TS videos to the video formats supported by YouTube, Yahoo, Myspace, Google for web sharing.

http://www.aunsoft.com/mts-converter/
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W190 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello, My Sony Cyber-shot DSC-W190 got wet and when I try to turn it on, basically the lens does not open it sounds like the camera is clicking as if it is struggling to turn on. Then the message on the screen reads, "Turn Power off and on again".. Once the camera dried, I was able to view my pictures but I can not take any pictures or videos.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sony Cyber-shot DSC-W190 Digital Camera

We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(


Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera

After uploading pictures from my camera to my pc yesterday, the zoom lens will no longer retract into the camera. I do get a message on the screen of the camera that says turn the power off and on again. I have tried everything, and still no luck. I have plugged it back into the pc, I have charged it, and have turned the power on and off at all options, and it still will not retract.


I believe its a sony cam. this generally happens if you have dropped it. when the message comes. try tapping the camera. if it works then you are lucky. if not then you have to change the lens array. it costs about 60$ ... Sony Digital Cameras

I've had my Kodak Z612 for about 2 years with no problems. The last couple of times that I hooked the USB cable to the computer to transfer pics, I turn the camera to on as I would normally do, a blue screen flicks quickly with a message I can't read and the screen goes off, (doesn't stay on and give you the percentage of sync completed message). Computer doesn't seem to be finding the camera. No problems with taking pictures. Could it be my USB cable is bad? I've charged batteries but never bou


We downloaded the updated software from kodak, rebooted the computer and it worked great. Thanks for the help. ... Kodak EasyShare Z612 Digital Camera

I have a sony cybershot DSC-W150, and for some reason, when i turn the power on, the lens opens and closes several times, then a message pops up on the main screen reading;"turn the power off and on again", and as i proceed to turn it on and off, it will not let me take a picture, any suggestions?


Hi, Lens requires manually restting. If you in the U.K , I can help you out.p.m me at [email protected] ... Agfa Cyber-shot DSC-W150 Digital Camera

Missing pictures I recently went on a trip and took some pictures that disappeared from my camera. Later I started getting the message 'Card cannot be read' so I purchased another memory card. I was taking pictures when I get the message 'Card cannot be read'. I turned it off and back on and the missing pictures were there. I then get the message 'Out of memory'. I turn the camera off and back on and the missing pictures are gone again. WHERE ARE THEY???


Hey flowernthe,\015\012 The error message “card cannot be read" means there was and error when the camera tried to access the memory card. To fix this you should make sure you are using the right kind of memory ... Nikon Coolpix 4600 Digital Camera

I have an Olympus tough 3000 wich seems to turn on and off when I try to power it on. the screen goes on and off every second. Not possible to take pictures. (this happens every time unless it have been connected to a computer. read further down) I wondered if a hard reset, installing the firmware once again could solve the problem. I have no problems in connecting the camera to mac computer. It can read whatever that is inside the memory card. If I disconnect the camera after it has been con


Hi,I'm sorry to know that the Camera is turning off and on again. I'll be glad to assist you with this. Please make sure that the battery in the Camera is fully charged and is holding the charge for making the Camera to turn on. You ... Olympus ? Tough 3000 / Stylus Tough 3000 Digital Camera

When power is turned on the zoom lense moves in and out on its own for a couple of seconds then stops. Camera remains on (battery is charged) The message changes from "access" to "turn the power off and on again." When that is done the same process happens again. Photos can be retrieved that are in the memory to view but the problem is getting to the starting screen in order to take a picture. What's up with that? Hope you can help!


This could be dust or lint or sand that has worked it's way into the lens assembly, and is keeping the lens from initializing. Often, you can take compressed air and blow it into the front lens assembly, to try to free up the small gears there. H ... Sony Cyber-shot DSC-W55 Digital Camera

When I turn my camera on, the screen remains black and says turn power off and on. Upon doing so, when i turn it on again, it begins beeping and says turn power off and on. But if I go to the view pictures screen and back to the "take" picture screen the screen just stays black and says turn power off and on


Hi, \012 \012 Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolv ... Sony Cyber-shot DSC-M2 Digital Camera

When I turn my camera on the lens keeps going in and out. On the screen it reads cybershot and then the message, Turn the power off and on again shows up. I turn it off and on but does not help. I can't find my manual to look this up. PLEASE HELP if you have ever had this problem. Thanks!


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Sony Cyber-shot DSC-W170 Digital Camera

The camera powers on fine, although it has a black screen with no image. What type problem is this and is it fixable or not. When I go to look at the pictures I took while the display screen was blacked out the screen remains with no image. I just turned on my camera the other day and I can still acces my menu, I can see the camera details in the corner and even view old pictures but when I turn it on eveything else is black! I can't take any new pictures because of the black screan. Is this fi


I have the same problem i need help fixing it? ... Nikon Coolpix S3 Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?


Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

Error Message "Please turn camera off and then on again" as soon as camera is switched on. Can view any menu, or read SD card, but cannot take any pictures or anything on lcd screen. regards JohnR


Read previous post with similar problem, Try removing battery and reinserting after about a minutes waiting time. Resets camera. ... Panasonic Lumix DMC-TZ3 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

When I turn the power on, it beeps and says "turn the power off and on again" plus it shows a battery in the upper lefthand corner. When I turn it off and on, I get the same message. I can view stored pictures but can't take pictures. I have charged the batteries and it makes no difference. Since I have been using and recharging the same batteries since I got the camera, could it just be that I need new rechargeable batteries? I bought the camera in 2004 and love it. Is there any hope for this c


I'll forward a link to a page where you can view the information to troubleshoot this issue. Please click on the link to view the troubleshooting steps then follow all the steps and check if that helps. ... Sony Cyber-Shot DSC-P52 Digital Camera

Optio M20 Camera: Press on/off button to power up camera, the camera opens the lens cover, turns on a red led inside the lens, cycles the lens out and back in,then makes about 5 little popping noises. The back screen shows Pentax Optio screen for a second, then then the screen displays the word Auto Picture in the center of the screen and Green Mode at the bottom and at the same time it cycles the lens out and in. And for a brief moment in the back ground of the screen you can see the picture st


I got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work ... Pentax Optio M20 Digital Camera

Hi, I own a Sony Cybershot camera, and it has been giving a few problems as of this week. The lens keep re-adjusting in and out when I turn the camera on to take pictures. It however responds just fine when in picture-view mode. There is a screen prompt that says 'Access' when the camera is turned on, as well as the message 'turn off camera and start again'. I do not think that the camera had fallen at any time, and it is just under a year old. Thanks a lot for your response, Sarah.


... Digital Cameras

I can't turn my camera on,I press the power button,it gives me a whirling noise,the lenses come out(but not all the way),the picture on the screen is blurry,and I can't make a shot,and after2 seconds the lenses come back in by itself.Then it does it again,without me even pressing any button!But I can still view my pictures.But I can't download them on computer,because it still displays an error message D: 5fo8 5e02,and the lenses start moving again.I don't know how to fix it.Please help me.Becau


The camera may be faulty or it needs to be reset to the factory settings.\015\012Try removing the battery leave it out for at least 1/2 hour, then replace the battery.\015\012If it doesn't work then you need a new camera. ... Olympus Stylus 700 / 700 Digital Camera

I turn on the camera and the lens pops out, but the screen just says "access" and then "Turn the power off and on again". I do so, and the same thing happens. Repeat. I can still view the pictures on the camera, but can't get past the screen errors to take more pictures. Any advice?


HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, ... Sony Cyber-shot DSC-N1 Digital Camera

Hi, I have a Canon Power Shot S2 IS 5.0 megapixels that was working fine until one day I changed the memory card from 512MB to a 1GB. Now every time I turn the camera on and try to take a picture, a beeping sound and a legend on the LCD screen that reads: Memory card error. It's like something locked the shutter mechanism. I tried other memory cards with the same results. Thanks, Roger.


Its possible that there may be an error on the camera try to reset the camera by \015\012\015\0121. Turn the mode lever to the camera or play button\015\0122. Press and hold the MENU button for more than 5 seconds.\015\0123, T ... Canon Digital Cameras

I turned the camera on to take a picture and got a message on the screen that said "error reading memory card." and it says now there are no images on the card, and there were images on it.


Download any pictures still on the card using a cardreader. Then, format the card in the camera. ... Canon PowerShot A520 Digital Camera

Error Message I recharged my battery last night after taking pictures and modifying some photos. This morning I turned on my camera because I was going to tr and download pics onto computer. I plugged in cord to the camera and to the printer port (that may have been my mistake) Nothing happened, since the camera wasn't on. I turned on the camera and I got this error message (on a red screen): Camera hs experienced an error. 00000013-2F6B-FFF-298 Please reset your camera I tried the lightly smack


Tried to take pics but got msg that battery is not charge enough to take pics.  I charged the battery overnight and nothing.  I turn on the camera and the little blue light illuminates for 1 sec and goes out, still no charge.  Do I nee ... HP Photosmart R727 Digital Camera

I have a HP camera CW450t camera and cannot turn it on with the power button on top. I know the batteries are good because I can turn on the camera with the review button and review the pictures that I have taken. When the power button is pressed the green light on the back of the camera flashes but the lens does not come out and the led screen does not come on. when you take your finger off of the on/off button the green light goes off as well.


Had the EXACT same problem with the CW450 model. I called support because I was mad and wanted it replaced. The support tech helped me through the issue. The answer is- NiMH. Alkaline batteries are unstable and not powerful enough for use with this c ... HP Digital Cameras

SONY DSC-S600 Sorry, no actual error -- what happens is this:- Power on camera, message comes up "Turn the power off and on again". Tried this-no good. New batteries-still no good. Sometimes it will start with an "Access" screen and then go into the "Turn the power off" message. Hope this explains the prob better Regards Sandra


If you are able to access the MENU option, then try to initilize the camera by following the steps mentioned below: \015\012\015\012Please press MENU to display the menu items.\015\012Please go to the SETUP menu and select the SETUP ... Sony Cyber-shot DSC-S600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4730 seconds