Having problems with your Sony Cyber-shot DSC-W30 Digital Camera ?

Dropped camera on floor and now the flash symbol constantly flashes up on screen but the flash does not work. The camera appears to be working ok apart from this annoying fault.


Answers :

The fall could have damaged the pcb or lines to the circuit. This is triggering the display to show the indiction. I would suggest that you ignore this as the camerra is working in good condition. If you would like to probe and think you can confidently open with precision the camera, only then make this try. It may be tricky inside to remove the flexible connections, connectors and locks. so if you can look carefully and open, check the electronics for a crack on the board.rectifying this with a solder loop would resolve the issue. if you do not want to take a chance knowing the fault to be such get a technician to open with this idea in mind. Hope you get this right.Good day
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W30 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dropped camera on floor and now the flash symbol constantly flashes up on screen but the flash does not work. The camera appears to be working ok apart from this annoying fault.


The fall could have damaged the pcb or lines to the circuit. This is triggering the display to show the indiction. I would suggest that you ignore this as the camerra is working in good condition. If you would like to probe and think you can confiden ... Sony Cyber-shot DSC-W30 Digital Camera

My Minolta x31 camera has a fault. Cannot record a photo (black screen) can playback photos stored on SD card. Flash & monitor work as per normal.When in photo mode monitor is nearly black all over.Flash fires & appears to record photo. Nothing recorded.Please help


Sounds like the image sensor may be gone. You should check with Minolta for service or the vendor where purchased. ... Digital Cameras

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t


I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

SONY DSC T33 SCREEN STOPPING SHOWING. CLICK SONY DSC T33 SCREEN STOPPING SHOWING. CLICK BUTTON,FLASH WORKS AND IT APPEARS TO TAKE A PHOTO BUT NOTHING SHOWS. ALL ISONY DSC T33 SCREEN STOPPING SHOWING. CLICK BUTTON,FLASH WORKS AND IT APPEARS TO TAKE A PHOTO BUT NOTHING SHOWS. ALL I CAN VIEW IS OLDER PHOTOS TAKEN BEFORE THIS FAULT AROSE (without warning) WAS NOT DROPPED/ ABUSED OR ILL TREATED. NO MARKS/CRACKS ON SCREEN. ...


This is due to failure of ccd imager chip in your camera, replace ccd imager chip to get live view in lcd to take fresh pictures.Let me know if you need ccd imager chip part number. ... Sony Cyber-Shot DSC-T33 Digital Camera

I have a Panasonic DMC-TZ1 that I can't get the flash to go off on. The only flash setting that works on my camera is no flash setting and the icon for the no flash symbol appears white. The rest of the settings such as automatic flash with red-eye, and automatic flash, ect... are red. Is this a settings issues or a repair issue? If it is a repair issue could you tell me what on the camera needs to be repaired. Weather it be the LED light is broken or a resistor or transistor on the circuit


... Digital Cameras

I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the flash it wont let me change the settings of the flash at all. Apart from this the camera lens shutter seems to be sticking when i turn on the camera it doesnt always open i have tried cleaning the lens but it doesnt seem to make any difference!


I have a sony cybershot DSC-W210 and just recently the flash wont work when its on any mode to take a picture it has the flash symbol on the screen flashing and the code E:91:01 underneath also flashing its takin pictures as normal just without the f ... Sony Cyber-shot DSC-W70 Digital Camera

My Panasonic digital camera model DMC-LZ4 appears to have a stuck shutter. The LCD is black except for the informational icons. Picture review works so the LCD is fine. The flash works, just no real pictures; each new picture is a blank. The lens drive works. All the electronics work, appears mechanical and related to the shutter.


Hi leeallenebaythank you for using fixya.the issue that you are experiencing is actual a power saver for the unit. on the controls of the camera you will be able to see the button "Display", if you press that you will have d ... Digital Cameras

Flash Failure I have had this camera for three and a half years and the flash quit working. Everything else appears to work except the flash.


Hi\015\012\015\012please check if the flash setting has been altered from the auto or flash mode to no flash mode\015\012\015\012if this is not the case then u may have to take it to the nearest serice centre for the flash may ... Kodak EasyShare Z740 Digital Camera

Sony DSC-WX100 I have a flash error E:91:01 on my WX100. I have tried to initilize the camera but the fault remains. I have found a replacement flash board from a working camera but the service manual says I should clear the flash error before installing the new board?


... Digital Cameras

Err 02 When i switch on the camera the EOS appears on the lcd screen other than that it is blank. After a while an error 02 appears (CF card fault). I have tried previously working cards and they all do the same. The manual says re-format the card but as the lcd screen is blank, this is not possible. The battery is fully charged. Is this a problem with the camera or the card.. My gut feeling says it's the camera.. Please help, Thanks...


Hi,If we talk about Error 02 - This error occurs when image data cannot be written to the CF card.\015\012This error can occur when the CF card is not fully seated in the camera\015\012or if the 350Ddoes not detect a card-ready signal wit ... Canon Rebel XT / EOS 350D Digital Camera

Olympus 1030 SW Camera leaked through both the battery door seal and the usb door seal. Did my best to clean it up and dry it out. Camera was finicky in at first. After a day everything work great except the flash. That could be from one cable I disconnected when taking it apart to clean. Current issue. After weeks of working it will not turn on. This may be related to the event described above or not. I press the power on button - screen backlight turns on - beeps (bloing) 4 tim


I have the same camera and has the same problem. Mine flooded twice and when I followed the normal dry it out, clean the seals, charge the battery, etc, etc... I was left with a camera that didn't work at all after the second flooding. I returned it ... Digital Cameras

My EOS 400D flash sometimes pops up in bright daylight in full auto mode. I sent it back to Cannon who returned it saying no fault found. I then began to think that the problem was the way I held the camera and that I may be obscuring the (light?) sensor near the grip with my hand. After not using the camera for a while I am now taking shots again and the flash pop up problem has re-appeared. I am now sure I am not blocking the sensor. Any ideas?


In full auto mode, the camera tries to use fill flash, when it detects a backlit scene (e.g. a person in front of a window). So this is not a bug, it's a feature!If you don't want the flash to fire, you can push it down and still take the shot. ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Im getting an Error 99 on my EOS-300D Digital Camera when I turn off my YN 465 Speedlite flash gun (still mounted) and then I start shooting manually without the flash. Help please, its a bit annoying, but when I remove it from the hot-shoe of the camera, the error doesn't appear anymore.


To fix this err99 issue, do the following \015\012\015\0121. Turn off the camera.\015\0122. Remove the lens, battery, and CF card.\015\0123. Allow the camera to sit without power for approximately 20 minutes.\015\0124. Insert a fully charged ba ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Hi, I have a camera, a Sanyo VPC-T1060 and it's having some problems. It turns on, flashes, takes photos apparently, but the LCD screen won't work. It turns white when I turn it on and when I take a photo with flash black lines appear all in the photo. I've tried finding a reset button, but nothing has been found. As I said, it takes photos, but I need the LCD screen to take a photo so I can see if I messed up and should take more. I'm a photographer and I got this camera as a side kick to my DS


Try to remove the memory card if used, and blowing out the connectors in the camera cavity with compressed air (to remove dust if any).\015\012\015\012Make sure the contacts are clean. If necessary try another memory card.\015\012 ... Sanyo VPC-T1060 Digital Camera

Brand-new Canon Powershot SX120 IS and have put in the batteries and card included in the pack. All seems to be working normally - EXCEPT the screen is continually dark and not showing anything the camera is pointing at. Only the standard icons appear on the screen. The flash seems to be working correctly. Have checked through the instruction manual and not sure what I have done wrong - I have literally set it all up by the book and previous camera was a Canon, so it is fairly familiar with sett


I am not sure if this advice will work for your model, but it does work for other Canon models.There is a DISP button on the back. When you push it in, it will turn off the LCD display. Hit it again, and it will keep the display off but ... Canon PowerShot S3 IS Digital Camera

I have a Canon XM3 camcorder. It has given me many years of good service. Recently it has developed a fault. When I switch it onto Camera mode, and then flip the switch to Standby, the small screen flickers blue for a short time, but it does not show the image from the lens. If I switch off, and sitch to Playback, the small screen works OK and all the Playback works fine. Sometimes when I switch to Camera, and Standby, the small screen flickers blue, and then an image from the lens appears, but


Its the problem of CCD assembly\015\012CCD (image sensor) failures, particularly in conditions of high heat and humidity, led to cameras capturing images with either no picture at all, or with extreme distortion and se ... Digital Cameras

No Flash Hi The flash has stopped working on my pentax optio w10 camera. Is this a known fault, is it repairable or do I need a new camera, thanks G


Hello. \015\012\015\012that is repairable, however only the expert on pentax camera can do the task. You can contact your vendor maybe they can cater the issue about the camera. best regards, melnavz ... Digital Cameras

E:91:01 My camera got wet a couple of days ago and since then the flash symbol and the E:91:01 error message comes on whenever I switch it on. It only works when plugged into the mains (the battery will not charge). All functions apart from flash seem to be working, and it still takes pictures when plugged in.


According to the user manual an error 91 means that the camera has malfunctioned. You need to reset the camera. Here is how you do that: ... Sony Cyber-Shot DSC-P200 Digital Camera

I have two Ricoh cameras 1. XR1 35mm SLR - a. camera back lets light in & I beleive requires a new soft seal. b. camera flash synchronisation appears defective. 2. 500RF Compact - camera backs lets light in & as above I believe requires a new soft seal. Can you please advise if repair work for each camera possible & typically what cost so that I might evaluate if it is worth pursuing. Thanks Rgs Peter Drury


Solution requested from alternative service provider.\015\012No further action required. Thanks. ... Digital Cameras

Can't download pictures from my Canon Ixus 80 IS camera via USB cable. It appears to connect but there is no software options in the window and only option is to cancel. I aslo notice that the little green light flashes on the camera and then the screen goes off. The other downloaded canon software also fails to recognise there is a camera attached. I can down load my pictures via the card reader.This was working up until the end of March but my software crashed with the camera still attached an


... Canon IXUS 80 IS Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Flash is not working in my DSC-S930 steady shot camera. if i try to change flash settings. message appears on screen: Flash settings cannot be changed


... Sony DSC-S930 Digital Camera

DSC-W70 The camera seems to work as it should however when I take a picture, the resulting image on the LCD screen is distorted. By this I mean that lines appear horizontally across the screen. The only time that it works well is when I take it out of normal mode and set it to Multi Burst. However with Multi Burst, the flash does not work.


Did you ever get this problem resolved? ... Sony Cyber-shot DSC-W70 Digital Camera

I have a canon rebel xti with an 18 to 55 lens .. I recently bought an external flash to sit in the hot shoe .. now when I removed the flash from the hot shoe .. the cameras own flash will not pop up and work... I can manually pop the flash but it still will not work..  I thought that when I bought the flash at the camera store the sales person turned off something on the camera for the new flash to work.. is there something I need to change in the menus to get the cameras own flash to work.....


I had the same problem. \015\012Look closely at the hotshoe. Inside it, way over to the side, under one of the tabs on the side, is a tiny metal strip. When you attach an external flash, the strip is pushed down and holds down a tiny button ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Camera works OK inside the house, as soon as you point it towards a window (blue sky) the blue turns pink. Using flash indoors is fine without flash indoors is ok as well.White balance maybe, or could the CCD be at fault?


... Konica Minolta DiMAGE Z6 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4520 seconds