Having problems with your Sony Cyber-shot DSC-W35 Digital Camera ?

Error E:91.01 code flashes on the display,NO flash either


Answers :

Hi,
Error E:91:01 is for faulty Flash unit, You have to replace FLASH UNIT contains ST Board along with capacitor. The detail of part is given below,

Part No. Description
A-1254-671-A ST-133 BOARD, COMPLETE

Replace the above said part number and your camera work fine again.
Thanks for using fixya.
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W35 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

System Error The message "system error" and error code 32O keeps flashing on the LCD display. According to the owner's manual, the solution is to switch the camera off and then on again. This did not work so I removed the battery a few times. That didn't work either. Can anyone solve this?


Hello,\015\012If you have little knowledge of electronics hardware, then open the cabinet of camera and pull out every flexible connection cable and reinsert them. I would like to advise you to pay full attention while doing so, because these f ... Sony Cyber-Shot DSC-F717 Digital Camera

No flash error code E9101


... Digital Cameras

My daughter's Sanyo VPC S1070 digital camera shows a Lens error code: 0x15110000. I've tried to look at/download pictures and it won't do that either. It has 10.o megapixels and was purchased at Christmas. The lenscover doesn't open either and no images show on the LCD screen. I won't say powered on for more than a second, just long enough to flash the message.


We have the same problem with our sanyo...does anyone know the manufacturers number...walmart would not take it back cause we threw away the box..so we are stuck with a camera that does not work and spent alot of money on it. any suggestions??? ... Digital Cameras

Error E:91.01 code flashes on the display,NO flash either


Hi, Error E:91:01 is for faulty Flash unit, You have to replace FLASH UNIT contains ST Board along with capacitor. The detail of part is given below, Part No. DescriptionA-1254-671-A ... Sony Cyber-shot DSC-W35 Digital Camera

I have an error code on my Sony Handycam SDR-12 HDD. The code is E31:00. The manual says I cannot fix the problem. Do you know what the problem might be? It started as a format disk error. I reformatted the Hard Drive. The camera recorded fine, but the error code is still flashing.


... Digital Cameras

My DSLR-A100 built-in flash is not working. I keep getting the following error: CAMERA ERROR CODE = 0x31 Can someone tell me what might be the problem. Also, can the flash be changed as I was told by a camera tech that the flash's bulb may be blown.


... Sony Alpha DSLR-A100 Digital Camera

Sony Cybershot DSC-W55 Flash Error Code


Try to go to setup menu, select the toolbox icon 1 and select "INITIALIZE" click OK. Master reset and it should go back to normal. ... Digital Cameras

I have a Sony Digital camera DSC-W110 with an error of (E:91:10)flashing all the time while on, from what the manual says it has to be fixed by a service techinican if the reset button dose not fix it, it still works OK and takes photos but a makes a beeping sound than just flashes the error code (E:91:10), can you help.


Below is sony dsc-w110 service manual link:\012http://goo.gl/aAjU08\012\012if you need help with disassembly oor other stuff. ... Sony Cyber-shot DSC-W110 Digital Camera

I have a 10D which used to belong to my editor. I have noticed that at times the camera refuses to take a picture, and flashes up an error message which is either 'Err OS' or 'Err 05' (I'm not sure which). How can I pyt this right. I think that when the error occurs the caera is trying to pop open the built-in flash, at least someone told me that today.


Have you cleaned your lens assembly?if nt do that ... Canon Digital Cameras

Flash no more working: error code


You must have an E:61 or E:91 error. You will need to send it back to Sony but, that is what warranties are all about. I am sure it will be fixed quickly and for free!! ... Sony Cyber-Shot DSC-F505 Digital Camera

When in AF mode I get error code 05 Auto Flash will not open


... Canon EOS 600D Rebel T3i Digital Camera

I have Sony cyber-shot camera, and for some reason the flash does not work anymore, but on the screen the flash symbol is flashing with an error code, E:91:01. What does this mean and how do i fix it?


You could be having 1 of 2 issues when ever you get E:91:01 error it is either the main board or it is the flash circuit. Depending on the model number would determine the cost of the repair. I fix DSC ... Digital Cameras

My Sony Cyber-Shot DSC-W120 has a an Error code displaying on the screen which shows as (E:91:01) blinking at the same time with the Flash icon which is given on the top right hand corner of the display. I'm also unable to use the Flash or even go to its menus. Please let me know what exactly is this problem as i think its something to do with the flash??


E:91:01 stands for flash. Go to Menu and find Initialize and make it yes or OK.Problem solve. ... Sony Cyber-shot DSC-W120 Digital Camera

Flash does not work. LCD Display only flashes flash sign and gives error code E 01 01


... Sony Cyber-Shot DSC-P7 Digital Camera

CANON 40D. Had Flash Error code 05. Powered down for 12 hours. Camera now gives message "Busy" when shutter trigger button depressed. Flash works manually and antennae pops-up , Flashes works manually. Have no access to any other control or menu. Both memory card and battery have been taken out and replaced several times.


Pop up flash locking mechanism needs adjustment or to be replaced . You\015\012might be able to do this yourself but the top cover has to come off\015\012completely ( the mechanism I am talking about is on the inside of the\015\012top cover and is no ... Canon Rebel XT / EOS 350D Digital Camera

What is error code E:91.01? This appears when the camera is turned on and flashes along with a flashing "flash" symbol near the bottom. I think the camera shuts off after a few pictures are taken. HELP!!!


... Sony Cyber-shot DSC-T70 Digital Camera

Error code when using the built in flash


Error code means to reboot the unit. ... Sony Alpha DSLR-A100 Digital Camera

Sony DSC-W50 Flash Error code-E:91:01


Press Menu button togle across from REC Mode to setup togle down thrice from camera to setup 1 togle across into sub menu togle down from four times to Initialize togle across again to the sub-menu togle up from ca ... Sony Cyber-shot DSC-W55 Digital Camera

Sony DSC P52 won't flash Error Code is E:91:01 tried reset already


When you pressed the reset, if it cleared the time and date that button is working. If that did not clear the error it is a hardware fault, meaning that a circuit has failed and parts will have to be replaced.\015\012A local camera store might ... Sony Cyber-Shot DSC-P52 Digital Camera

How do i remove the hot shoe / flash on a canon eos 35od. I am getting an error code 05. where the flash seems to be stuck and wont open... it would appear that i need to reset the mechanism ? how do i do this ? thank you


Built-in flash or flashlite?Does the camera work on one of the manual modes where the flash isn't on by default?There is a reset to factory settings in the menu... not sure if this will help though. Also check the contacts for the lens to ... Digital Cameras

Camera locked up error code (compact flash error)


Remove the card and look in the slot for a bent pin. If you see one, remove the batteries also. Use a small/skinny jeweler's flat screwdriver to bend the pin back as close as possible. Take your time and use as much patience as you can muster (take ... Canon Digital Cameras

When I try to use the built-in flash I get 'Busy', then an error message and it suggests re-installing the battery. Tried but no good. The camera won't automatically start the flash for indoor photos either. Help!!!


Problem in flash board unit so use external flash & if you won' t automatically start the flash for indoor keep the camera to AUTO MODE ... Canon EOS 450D Digital Camera

My sony cybershot dsc-m1 flashes an error code: E:61:00. I've followed the instruction from the manual that is, press the reset button on the device, but the error was still there. The manual also noted, if this persisted, really must consult an expert or bring it to a repair shop. What should I do before bringing it to the repair shop to at least cost me less? thanks


... Sony Cybershot DSC-T200 Digital Camera

When I insert the cassette and press Start, after a few seconds the error code C:31:23 flashes and the message "Reinsert cassette" appears in the display. I have already tried several repair procedures but the error remains. As a final solution, must I send-in the camcorder for (costly) repair, or is there another possibility? Rene


Hi,\015\012\015\012To service the C:31 code, Sony recommends you do the following:\015\012\015\012\015\012Turn off the camcorder.\015\012Remove the battery or disconnect the AC power adapter for ... Digital Cameras

My Canon EOS XTi keeps giving me an 05 error code which means that the pop up flash was impede . It does this every time even though I have made sure there is no obstruction at all. I tried gently to pop up the flash by hand but it won't budge and I am afraid to damage it by forcing it. Is there I lock on it somewhere that I don't know about? It says nothing at all about the issue in the operator's manual. Thanks, Bill


Dear Bill,the Pop up flash activates a switch which sends it message that it is up. Now there can be few things which are stopping it from doing that.1. Something has stuck, so small piece of anything,in the switch and not letting it oper ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1837 seconds