Having problems with your Sony Cyber-shot DSC-W35 Digital Camera ?

No matter what the set resolution all pictures come out at 72 psi. I have tried resetting to factory defaults but was unable to accomplish this.


Answers :

PPI (points per inch) is an output specification and is irrelevant as far as the camera is concerned. The camera has to put some number in there, and it uses 72 since that's the value usually often for computer monitors. The only time it really means anything is when printing the picture.
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W35 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No matter what the set resolution all pictures come out at 72 psi. I have tried resetting to factory defaults but was unable to accomplish this.


PPI (points per inch) is an output specification and is irrelevant as far as the camera is concerned. The camera has to put some number in there, and it uses 72 since that's the value usually often for computer monitors. The only time it really means ... Sony Cyber-shot DSC-W35 Digital Camera

My Benq C500 Digital camera is now unable to make a decent focus. All image are now blurry. I've tried to reset the camera to factory default but nothing changes.


There may be a fault, but first make sure that you haven't put it into "Macro" mode. This is usually indicated by an icon of a flower. This is a special extreme close-up mode offered by some cameras, and it does not allow autofocus on objects at norm ... BenQ DC C500 Digital Camera

"whiteout" My exlim started to give what I'd describe as "whiteout" - ie pics just come out as if totally overexposed - when in the Himalayas trying to capture snow scenes. I resolved the problem by zooming in slightly for each pic, but this sol'n has now failed, and even at max zoom the pics are no good. I've run through the settings trying to ensure that all are reset to factory default - and have run out of ideas..... Seeing past correspondence about trying to get these fixed - esp near Cairn


If the photo shoot out show white , the obscure (quality variation),and even horizontal line ( white lines), and so on over-exposure cases,even if the use of anti-tremor, set to default values are invalid,because the camera shutter fault. ... Casio Exilim Zoom EX-Z700 Digital Camera

Suddenly I can't control the aperture with the sub command dial in the manual mode. I have tried a "hard reset" and the two button reset to factory defaults. In M,A and S modes the shutter and aperture values will disappear and only return after a two button reset.I can adjust the aperture in A mode with the command dial.The shutter speed is adjustable in M mode with the command dial.


In Manual mode only the front dial can be used to set the aperture. That is probably In Aperture mode you can only choose the the Aperture. Shutter speed is automatically chosen. That is why the shutter speed value will disappear.In Shutt ... Nikon D80 Body Only Digital Camera

Poor Resolution I have 3 cameras 2 canon 750 powershot and one olympus fe-230, I uploaded the photos to Shutterfly and all photos from the 3 cameras said poor resolution.  I reset them to the factory settings and tried again, same response.  what is going on?


E sure the quality setting is the highest - 7 megapixels. Otherwise, why buy a 7MP if you shoot at 3MP. The Canon 750 seems to have excellent picture quality where the Olympus has soft focusing (reviews at C-net). ... Canon PowerShot SD550 / IXUS 750 Digital Camera

Overexposed Pictures Whenever I take a picture they are too bright, even though none of the settings have been changed. I have tried resetting it to factory default settings but its still the same.


... Ricoh Caplio R2 Digital Camera

Canon 50d busy signal when trying to reset to factory default


How long does the busy signal stay on for? does it act like it is frozen? does it ever reset to factory default? lots more questions cant help with no info on the problem ... Digital Cameras

My sony dsc-t700 no longer automatically uploads photos as soon as i connect it with my computer. also, i can no longer edit photos (red-eye, crop, etc) as when i try to do so my computer defaults me to the microsoft "paint" application, which is absolutely terrible. should i reset factory settings? please help.


Use a card reader to download your pics to a folder you create on your desktop. From there, you can open your pics in any photo editor you want. ... Sony Cyber-shot DSC-T700 Digital Camera

Acer how to fix acer iconia a501 tablet camera focus. It can ONLY take close up photos clearly up to about 10cm. Beyond this any all photos taken are extremely blurred as if the camera is out of focus.I tried resetting the camera properties to default factory setting but this did not help.I downloaded another camera app and this too was useless.How can I set it so that all shots are on infinity focus and not just set to macro shots.CheersJoseph


... Digital Cameras

The viewfinder of my Nikon D80 is grayish and blurry when it's off. I cant see a thing when I tried to use my 18-135 mm lens. I don't have a battery to reset it to its factory default settings. Do you think there's something wrong with the camera or the viewfinder is always blurry and grayish when it's off. I have owned D40 earlier and I could play around with the viewfinder even when the camera was off.


Hi,\015\012There is chance that your settings are just off . Set your settings to AUTO and then try again to view in viewfinder .If you sre still unlucky then there is some problem in camera ,You need to take to service center to get it service ... Nikon Digital Cameras

The camera is not focusing and there is a black halo around the camera display, which also comes through onto the picture. Tried resetting factory defaults but no change. Thanks.


GO TO ENGINEER ... Ricoh Caplio R6 Digital Camera

The photo in view mode lacks colour resolution and has horizontal banding. Have reset to factory default but still occurring


Hi,This\015\012 is a common problem. Check the previous images saved. If even the saved\015\012 images/video's looked blurred, this confirms defective LCD screen. If \015\012saved images are fine, then this is highly suggestiv ... Canon PowerShot A85 Digital Camera

Can not reset to factory default


... Canon PowerShot SD870 IS Digital Camera

Olympus 4050sw. when i switch on the camera it gives me an error message saying clean card (which i tried several times) or giving me the option to format. i've recovered my pictures from the card through my pc and the pc recognises the card and the pictures fine. now when i try to format it says "card error". I've even tried resetting back to default and it still says "card error". help! is there some way i can do a hard reset?


... Olympus Stylus / mju 1050 SW Digital Camera

Need to reset to default settings. Camera says its "busy" and can't reset. Also trying to get the date stamp back on my pictures. When I try to scroll to date stamp on/off it skips over it and will not highlight. Help!!


... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I'm not sure what is relevant and what isn't but... Two days ago I tried taking a picture on my timer and all of them came out blurry. I wasn't sure why this was so I started poking around on the camera and decided to reset all factory settings. Then that evening I tried to upload my pictures to my computer as usual. The software (Picasa) locked up. I tried taking the camera out of the cradle and turning it on but it wouldn't turn on. I rebooted my computer and tried turing the camera on


Sometimes a camera software upgrade will help, but it is hard to find software online. I first would look on manufacture's website to see if there is any driver updates you can download to your pc, then do the same with picasa software. Also make sur ... Digital Cameras

My niece has locked herself out of her phone , a Motorola Krave Z94, she reset her password and now cannot remember it. Is there anyway to bypass this or reset the phone or password. We have tried many many factory setting codes but nothing as worked so far,I was told I may have to do a hard reset , what is that? will it work? and how do I do it?


Just make sure the phone is off, then hold down E and Z on the keyboard, then turn on while holding the E and Z. That's it.if this does not workMake sure phone is off, then hold down left and right soft keys on the keypad, the ... Digital Cameras

Overexposure My Nikon D40x is WAY overexposing in AV or S mode. Does it need repairing? (a long trip to get fixed). I tried resetting to default store settings, tried using only manual focus, tries changing the metering options. Noe have worked. AV mode worked beautifully 6 months ago in Africa ......


That sounds like the aperture blades may be sticking open.\015\012See if the overexposure gets worse and worse as you close the aperture\015\012When you see these kinds of symptoms, and is usually caused by oil that's leaked on the apertu ... Nikon D40x Digital Camera

My cannon ixus 130 is permanently blurred, i have tried resetting to factory setting using the menu


Time for a new camera. There is no reset hidden or otherwise. ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Hi, I have a Canon D100 but whenever I try and take a picture, the pictures are all black. I tried to reset the camera to it's default setting but haven't had success with it. It started off with half the picture, now it's the entire picture! What do I do? Is it dead? Thanks.


... Nikon D100 Digital Camera

Brand new samsung g600 getting message, preveiw error when trying to turn camera on, have tried soft reset and changing the default memory to the memory card but it has made no difference


If it is Brand new then i would suggest calling Samsung. sounds like it is having ROM issue. not something easily fixed on your own. ... Digital Cameras

I am trying to get my camera back to the factory settings but everytime i go menucardset then go tocustom reset setting it jumps over it and goes straight to picture mode. I cannot get it to highlight custom reset setting.


There may be another "reset" in the menu that will do what you want. Search for it. ... Olympus EVOLT E-500 Digital Camera

Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?


Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera

Olympus SP-550 UZ won't focus properly most of the time. Focus point should be infinity since my subjects are seascapes, sunsets and clouds. I've tried all 3 AF focus modes but none work consistently. I can get it to focus sometimes if point the camera at the ocean first. I've even tried manual focus but it won't focus to infinity. This camera is practically new, has never been dropped. Is this a known problem with this camera? Is it a settings problem (I've reset the camera to factory settings


... Olympus SP-550 UZ Digital Camera

Canon powershot S230. I tried getting help with you last week, but the problem wasn't resolved. The LCD monitor is dark with horizontal lines, running through it. Part of it is white. I have tried resetting the camera to defaults, p.125, and set the white balance, but I can,t seem to get it.


My camera still doesnt work. I want my money back. Thanks.\015\012Donna Bernards ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1394 seconds