Having problems with your Sony Cyber-shot DSC-W50 Digital Camera ?

I am on my third dsc w50 and they all had the same problem and don't work??? all say... access then... turn power off-on again" HELP! Same as marimccall. Black screen with 'Access', lens moves in and out three times and then the screen shows 'Turn the power off and on again'. When turning off and on again the same sequence is repeated. Any help would be appreciated.


Answers :

Hi,
Error message "access then turn power off-on again" comes in DSC-W50 when lens mechanism failed to provide Initialize signal to system control IC.
When camera powers up, lens extended and there is photo coupler that sends pulse to system control IC that confirms that lens is fully extended so system IC opens IRIS control to get an image on CCD Imager to produce image signal for further process until you get an image on camera LCD.

Camera will be apart to do get it repaired. Let me know if you are ready to open it and have percioon screws drivers set, tweezers etc. I can assist you to fix it and least is to replace lens assembly that seems costly part.

Hit "add a comment" button to reply.
Thanks.


Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W50 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am on my third dsc w50 and they all had the same problem and don't work??? all say... access then... turn power off-on again" HELP! Same as marimccall. Black screen with 'Access', lens moves in and out three times and then the screen shows 'Turn the power off and on again'. When turning off and on again the same sequence is repeated. Any help would be appreciated.


Hi,Error message "access then turn power off-on again" comes in DSC-W50 when lens mechanism failed to provide Initialize signal to system control IC. When camera powers up, lens extended and there is photo coupler that sends pulse to syst ... Sony Cyber-shot DSC-W50 Digital Camera

My S3 IS was working perfectly until one day it powered on but simply would not snap a photo. And once it's powered on, I can't turn it off. I have to leave it on and it eventually powers down after some time. I've tried new batteries and turning it on several times without any luck. The screen powers on and I can access the menus, but it won't take a picture or zoom. Any ideas?


... Canon PowerShot S3 IS Digital Camera

When turned on, Access comes up, and lens goes in and out 3 times, then screens says to power off then on again, This will repeat when powered off and on again and so on. I have tried a factory reset, but the same things appears. Access, then power off and on again


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

When turned ON, screen shows "Access" and lens moving in and out two or three times with yellow light beside viewfinder blinking, then "Turn the power off and on again". Turning power off and on again doesn't do anything. Can anybody help please?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Sony Cyber-shot DSC-W30 Digital Camera

My sony cyber-shot dsc-w55 7.2 mega pixel camera turn on but the lens goes in and out many times and i get the word access on the screen then i get a message says turn the power off and on again, I did that many times , but it did not work, and I can't get the menu button to work or display any thing, so I am wondering what is the problem and how to fix it?


... Kodak EasyShare CX6200 Digital Camera

Sony camera When I power up my camera, the screen says Access and the lens goes in andout a few times and then the screen says turn the power off and on again. When I do that it doesn't fix anything, so I still have the same problem


Ok to fix this just switch on \015\012gently pull and twist the end of the lense you may here it click but dont pull or twist to hard till it pops\015\012then switch camera off and on again and you should have solved the problem.\01 ... Sony Cyber-shot DSC-W55 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

When I try to turn my sony dsc-w55 camera on, the screen says "access" and the lens cycles in and out 3 or 4 times and says to turn off the power and turn on again. Any solution??


Bang in in table. Turn it on again and gently hold lens out. Viewfinder will spring into action again immediately!!! ... Sony Cyber-shot DSC-W55 Digital Camera

Lens issue A black screen comes up with the word access. The lens seems like it is trying to fix itself but is jammed. After a few tries the screen says: Turn the power off and on again. I have done that and tried removing the battery for a period of time and recharging it but nothing seems to have an effect. Thank you in advance for your help.


This is either a faulty lens mechanism caused by dirt ingress or damage, thus not able to complete the process- Contact Sony for repair erstimate. ... Sony Cyber-shot DSC-W50 Digital Camera

Every time I turn my camera on it shows the word access in the screen and then tells me to turn the power of and on which I do but nothing happens.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that you will ... Sony Cyber-shot DSC-W55 Digital Camera

Every time I try to turn the camera on it beeps and the screen says access... then says turn the power off then on again. Why?


Hi, This problem is related to optical zoom motor,The part detail is given below:Part No. DescriptionA-1231-924-A LSV-1160AReplace the said part number and your camera ... Sony Cyber-shot DSC-W80 Digital Camera

!!! help my brother dropped by sony cyber-shot on the floor and now when i turn it on the screen says "access", the lens goes back in and then comes back out a couple of times, and then it says "turn the power off and on again." what do i do?


Yeah, mine was doing that too. only way it would work is if you tap the bottom of the camera on something. But mine finally today stopped working even after doing that. now it's just garbage. my suggestion is just to purchase extended warranty from n ... Sony Cyber-shot DSC-W55 Digital Camera

Upon power up, display screen says 'access', lens goes in and out several times and then the camera beeps and display says 'turn the power off and on again'


Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Sony Cyber-shot DSC-W70 Digital Camera

When i on the camera "Access" appears on the screen,the lens comes out and goes back 3 or 4 times and after few moments it appears "turn the power off and on again".When it is shut off and turned on it do the same again.What is the problem?


If the camera has recently been dropped you may have lens damage that's\015\012preventing it from powering up. If it hasn't been dropped your\015\012problem\015\012may be due to weak/worn out ... Sony Cyber-shot DSC-W100 Digital Camera

Sony DSC-S600 Sorrry! What happens is this:- Turn camera on,Cybershot screen opens up with musical jingle then it will say "Access" then another screen opens up saying "Turn power off and on again". Sometimes you don't get the "Access" and it will go straight into the "Power off and on again" screen. Tried this - no good. Changed batteries for fully charged brand new 2700mAh NIMH - 1.2V Uniross - still no good ! Any advice would be appreciated. Regards


If you have a memory card in the camera, take it out before turning the camera on ... Sony Cyber-shot DSC-S600 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

When starting the camera, I get a black screen that says "Access". The lens pops in and out several times. Then the message, while the lens is out, is "Turn the power off and on again". Help.


I'll forward a link to a page where you can view the information to troubleshoot \012this issue.\012\012\012Please click on the link to view the troubleshooting steps then follow all the steps and check if that helps.\012\012\012 ... Sony Cyber-shot DSC-W50 Digital Camera

The camera was bought in Berlin two weeks ago from the SONY CENTRE !After downloading the pics to my PC for the second time,I erased the pics in the memory card also for the second time,and put the battery on the charger at night! So far so good!The next morning when i placed the fully charghed battery back in the camera and pressed the power ON,the lens goes IN-OUT three times and the screen indicates in a menu 'Turn the power off and on again';Also out of this menu on the screen(monitor) the '


Hi there lakispapNormally , this error would indicate a lens error where the lens cannot extend out of the barrel. Usually it's because of accumulated dirt in the lens sheath , but since you camera is only 2 weeks old , this is barely an ... Sony Cyber-Shot DSC-P10 Digital Camera

The camera was bought in Berlin two weeks ago from the SONY CENTRE !After downloading the pics to my PC for the second time,I erased the pics in the memory card also for the second time,and put the battery on the charger at night! So far so good!The next morning when i placed the fully charghed battery back in the camera and pressed the power ON,the lens goes IN-OUT three times and the screen indicates in a menu 'Turn the power off and on again';Also out of this menu on the screen(monitor) the '


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Sony Cyber-Shot DSC-P10 Digital Camera

I have a Sony Cybershot DSC-W80 that's acting up. When I turn it on, the zoom/lens moves in and out four times. Then, the screen displays "Turn the power off and on again." When the power is shut off the zoom/lens move in and out two times before shutting off. This occurs every time.


Does it also show a lens error or any E18 error??have you dropped it anywhere recently??did you try a hard reset? ... Digital Cameras

Same Problem When I hit the power button, it flashes, the HP logo comes up on the screen the lense retracts and comes back out and the power goes off. That's all it will do. Other times when I turn it on, a little yellow light on the bottom left side in the back flashes once after the blue power light flashes three times and then turns back off. Arggggghhh!


Use never used batries i have the camra it work s better with new batries ... HP Photosmart M525 Digital Camera

Pentax Optio Hi. I have a problem. I have pentax optio which was working fine but one day when I turned it on, it powered up but the screen shows grey. I tried to turned it off and on many times and it turns on and off fine but still the screen is all grey nothing else but grey color on the screen. The flash works and it blinks like it takes picture but still the grey screen. If someone knows what the problem is let meknow. Thank you so much in advance.


Your shutter is not working properly ... Pentax Optio S Digital Camera

EX-S500: * I turn it on and the 'Adjust' screen comes up. *I press the 'Menu' and the lens comes out, the green light flashes for awhile, it beeps a few times, it grinds a few times and shuts off. The lens stays out. *I turn it back on, the lens goes back in and the 'Adjust' screen comes on. * I press the power button and the camera goes off. *I left the camera in the charge gradle all night and the battery did not charge. *Help


You could have a power and lens issue, going on at the same time here. There's a couple of web blogs that delineate things you can try to correct these issues, and here they are:\015\012 ... Casio Exilim EX-S500 Digital Camera

Power Shot G2 camera is at date screen when you turn it on. I changed date battery and it will not let me change the date. Camera has only be used 3 times. The camera powers on and lens moves but it will not leave the date screen nor do any of the buttons work to advance the time and date.


I had a similar problem. I solved it by taking the rear cover off and reseating a ribbon cable that connects the switches to the main circuit board. This connector is hidden under a large plug in connector - also a large copper/plastic ground plane ... Canon PowerShot G2 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3123 seconds