Having problems with your Sony Cyber-shot DSC-W50 Digital Camera ?

When turning my camera on, it makes a continual

\015 When turning my sony dsc w50 camera on, it makes a continual niose then beeps and it tells me to switch off and turn on again. This happens every time i turn it on. I cannot take photos at all.\015

Answers :

\015\012Fixing a Lens Error on a Digital Camera\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.\015\012
The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.\015\012
The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:\015\012
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.\015\012
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).

\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.\015\012
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W50 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When turning my camera on, it makes a continual


\015\012Fixing a Lens Error on a Digital Camera\015\012This has to be THE most common failure mode for a digital cam ... Sony Cyber-shot DSC-W50 Digital Camera

My Sony Super Steadyshot DSC-T70 (silver) camera was purchased from Best Buy in 2008 (the 2-year extended warranty just expired in April, 2010!!!) vibrates,continually and makes a noise when I turn it on. It will allow me to take pictures, HOWEVER they are blurry. PLEASE HELP!!!!!!!!! Would you consider replacing the camera? I did LOTS of research before purchasing this camera and I knew it was the one I wanted. I never even thought I would ever have to replace it! PLEASE HELP!!


You dont have to replace the camera only replace the lens block its faulty ... Sony Cyber-shot DSC-T70 Digital Camera

I have a Sony DSC-H1 camera and have recently removed photos from it's memory card - the same way that I've always done it before without any troubles. Now, when I put in the memory stick and turn on the camera, the screen shows "no file in this folder" and won't go any further. I've tried to go through the menu and reformat the memory stick but it didn't make any difference. What do I need to do to continue to use this memory stick?


If you have a card reader/writer in your computer, you can put it in there and try and format it, using Fat 16. If it won'd show up there, then your memory stick is faulty and will need to be replaced. If it does show up and you are able to format ... Digital Cameras

My camera had 2 lens errors lens error 211 and lens error111 i went to a website and plugged in my camera and took out the batteries and that is what it told me to do so I did so and now my camera won't vene turn how do i make it turn on and when it does turn on how do i get the lens errors to go away and make my camera work again?


HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will ne ... Digital Cameras

Turns out the Kodak Play touch does not have a pause and resume button. I am trying to video tape a "how to" and I need to combine two videos to make it one continuous video. How do I do that? Can I do that with the editing program that came with the camera? Or is there a Free Program that I can download that will be easy to use?


... Digital Cameras

Zoom error I turned my F470 camera on and received a "zoom error" bar across the screen. The lense does not move outwards after I turn the power on, nor does the plastic sliding screen close when I turn the camera off. The lense is exposed whether or not the camera is on or off. The lense does not make any sounds when I turn the camera on, but I hear (what I think) are the gears when I turn the camera off. When the camera is on, the screen is working, but the image is blurry. I tried other poste


Hey MBB722,\015\012 What is most likely going on is there is something stuck in the lens obstructing its movement (i.e. sand). I don't know what you have tried and what you have not tried you can try placing the came ... Fuji FinePix F470 Digital Camera

Batteries are fully charged. I can turn my camera on and look through my pictures, go through all the menus, etc., but as soon as I hit the button to take a picture, the camera just shuts off. I can immediately turn the camera back on, but it makes a strange clicking sound before it turns on. My lens is stuck out because even if I turn the camera on and turn it right back off manually, the lens does not retract. The camera was purchased in winter of '08 and I've had no problems whatsoever with i


Possible that the shutter or the focus mechanism is faulty and will need to be opened. Only if you are competent must you attempt to remove the camera as the mechansim and circuit will be delicate which needs experience. Ohter wise the best option is ... Digital Cameras

Lens stuck Please help me, I tried to turn on my camera today (it had been working fine before) and when I tried to switch it on the lens would not fully it open and my camera was making a whirling noise. The screen is black and will not take photos. The lens won't open fully and when it does eventually close has difficulty doing so. The camera then makes a beep beep beep noise and displays "Please turn the power on and off again". Please help I can't live without my camera and can't afford


If the lens is not coming out, its stuck, or it wont completely open or close, that is the lens assembly, that needs to be repaired. You need to take it to somebody, that can either repair it or replace it for you. There is nothing that can be done, ... Sony Cyber-Shot DSC-P8 Digital Camera

When I turn my camera on it says "Access" then a message comes up that tells me to "turn the camera off and then on" I have tried this many times and all the camera does is continue to push the lens in and out and then tells me to "turn camera off then on" Problem will not go away. Fully charged battery, took battery and memory card out for a while and re-inserted both and have same problem. [DSC-W55


This is a firmware problem that is common with many many digital cameras. It will have to be upgraded. The company will do this for $50Otherwise you may be able to find a kit online and do it which would be hard to located ... Sony Cyber-shot DSC-W55 Digital Camera

The entire zoom lens will not come out when I turn the camera on. It moves a little, makes a sound, and then my camera says turn off camera off and back on. I tried that several times and it is still not working. The battery is charged. I did go to the beach and wondering if sand got into the camera. I also cannot review my pictures as the message comes up about turning it off. What is the best solution?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-TZ3 Digital Camera

I was in the middle of shooting a wedding, when suddenly my camera said that it was 'busy' - it was taking a while to go back to normal, so I decided to shut the camera off and just turn it back on again (I didn't mind loosing the last image). When I turned the camera back on... all of the sudden the shutter kept going off extremely fast (without me pressing the shutter button). I turned the camera back off, but the shutter kept going off. I freaked out and too the battery out to make it stop.


Did you remove batteries for a couple of minutes, that is the first thing to do. ... Digital Cameras

The lens doesn't open when we turn on the camera. The camera makes the sound of turning on and the LCD monitor lights up showing standard Optio display, but the lens don't open neither the zoom. After turning on, the Off button stops working and the only way to turn of the camera is by removing the battery.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Pentax Optio 550 Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche


Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

Recently, i've been having an issue with my Kodak Easyshare M883 camera Every time i press the power button, the camera turns on, makes a weird noise, zooms in and out to refocus, makes the noise again, then completely shuts off. Its done this every time i turn it on for about a month now. I am completely able to review my pictures, let alone take any. I've tried plugging it into the computer, and even charging it overnight. please help me.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Kodak EasyShare M883 Digital Camera

When I connect my camera to the computer I don't get a popup window asking what I want to do with the camera. When I first got the camera there was no problem but after getting a new HD and reinstalling Windows XP and the Canon softwareI I can't seem to get any pictures off the camera. I do get the sound from Windows when I plug the camera into the usb port and turn it on that it recognizes somehting is there but then nothing else happens. Also when you turn the camera off Windows makes the soun


You might be able to type play back in your search bar under the start menu depending on your computer and o.s. (operating system) and bring up that window. ... Canon PowerShot A620 Digital Camera

Hi I have a Samsung L100 Digital camera. I was using it last night to make a movie, I finished the movie and than viewed the movie when I was done. I pressed the button to turn the camera off, well the lens stayed out and didn't retract and now when I try to turn the camera on the blue light comes on and than it beeps 3 times and turns off. I've checked the battery life and its full, right now I have it charging to see if anything changes >.> but I don't think it will. If you have any input it w


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Samsung L100 Digital Camera

When i turn on my camera the green light continues to blink then i sometimes get a black screen that says "lens error, restart camera" on the bottom of the screen. I cannot turn the camera off unless I take the batteries out or wait and it turns itself off


Remove battery and reset when you switch on tap on the lens hood several times. Listen if the jammed motor releases if not repeat again . It there is no result then wee might need to open the camera but only if your are equipped and have experience w ... Canon Powershot SX110 IS Digital Camera 9.0MP

I just turned on the camera to take a picture and noticed that the camera was not focusing. I tried changing the setting, turned of the camera and restarted it, removed the battery and put it back in. Nothing I could think of would make the camera focus. The screen only shows blurry and out of focus. The pictures taken by the camera are blurry and out of focus. Any suggestions on how to fix it? Thank You


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it ... Pentax Optio M40 Digital Camera

Canon SD900 My lens is stuck out, and everytime i try and turn on my camera it makes a grinding noise and then reads on the screen, "lens error restart camera" How do i restart the camera? And how do i make the lens not stick out if the camera is off? Thanks for your help!! C


First off, see if Canon can help you. If not, the following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try:\015\012 ... Canon Digital SD900 / IXUS 900 Ti Digital Camera

My camera fell on my floor when I was trying to film a video. Now it is stuck with the lens out, and when I try to turn it on it makes a weird noise, stops, makes it again, makes a new 'bloop' powering off noise, and that's it. I can click the little play button in the square to view my pictures and it will make noise and turn on and I can go through my settings but it will not let me switch to actual camera/video mode! What do I do?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Samsung SL605 Digital Camera

When I plug in my camera to the computer, instead of getting the two toned alert that indicates that the computer has recognized that new hardware has been attached to the computer, it makes a three tone alert. When I go to "my computer" the camera doesn't show up. But if I turn the camera off, the computer makes the two tone alert indicating that it recognizes that the hardware is uninstalled. What does this mean? I have been able to plug my camera in with no problems for the last four years s


If your goal is to get your pictures, try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a ... Canon PowerShot A75 Digital Camera

Camera lens The lens itself is making a strange noise and it is having trouble adjusting itself when the camera turns on. When I attempt to turn the camera on all you are able to see is a black screen and there is also a buzzing noise which I assume is the lense trying to adjust itself. The lens is trying to push itself outwards but it is getting stuck. I'm not exactly sure what is wrong with it but I assume that once Iam able to fix the lens I will be able to use the camera normally again.


Broken gears is common on the sony cameras. They have very brittle gears and have more torque then the gears can handle. They just break teeth off. There was probobly some small debris (sand,dust) stuck in one of the teeth and it got to that point an ... Sony Cyber-Shot DSC-P72 Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

When camera is turned on it makes several beeping noises then turns off when i turn my camera on, it keeping beeing, then it turns off, whats's wrong with it and what should i do?


HiWhats happening is there is\015\012some sort of problem with the lens, it could happen in many different\015\012ways such as sand or dirt in the lens gears or impact damage.A couple solutions would be to either buy a defecti ... Sony Cyber-Shot DSC-S85 Digital Camera

When i turn on my camera the screen is blurry, and a box comes up that says "turn off camera and turn on again", but it just does this continuously.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Panasonic Lumix DMC-FS5 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 1.4305 seconds