Having problems with your Sony Cyber-shot DSC-W50 Digital Camera ?

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Answers :

This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.
\015\012
\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre.
\015\012
\015\012They will quote you for a new lens assembly as they will not be able to replace the sensor only.
\015\012
\015\012Cost should be about 1/2 of what you paid for the camera.
\015\012
\015\012Good luck.
Repair Help & Product Troubleshooting for Sony Cyber-shot DSC-W50 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


Could not believe it but it worked for me as well. First time I see that a good smack makes it work ... Sony Cyber-shot DSC-W70 Digital Camera

Access Message Whenever I turn the DSC-W70 on it displays a black screen and the word "Access." At the same time the lens extends and retracts, however unlike some of the other problems people are having, the lens is not getting stuck. Also I also notice a faint clicking/buzzing sound from within the camera when the lens is still and not retracting/extending. After about 10 seconds it begins to beep and displays the message "Turn the power off and on again." I am able to view previously taken ph


This is a hardware problem. Your simptons is tipical of a lens position sensor being faulty.\015\012\015\012There is however nothing you can do yourself. Contact your nearest Sony dealer and take the camera to a Sony service centre. ... Sony Cyber-shot DSC-W50 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

About a week ago I turned on my Lumix TZ5 and in the screen displayed this message: "please turn camera off and then on again. I have taken the battery off and I have charged, but the message still displays. When I turn the camera on, the lens extends to the maximum but when I try to use the zoom the camera doesn?t respond. Then if I turn it off the lens stays out. Any idea? Thanks in advance. P.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Panasonic DMC-TZ5 Digital Camera

Upon turning on my camera the message 'lens error restart camera' appears against black screen. I've turned off the camera and have tried turning on again. Still same message. Prior to the above message, my camera displayed a message 'memory card error card locked' and I was not able to see view my photos. I took out the card to see if it was in a locked position to which it was not. Please help as I have vacation photos on this memory card!


Can't help with the camera- sounds like it has a fault.The photos, however, should be recoverable by putting the memory card into a card reader on a computer. ... Canon PowerShot SD1000 Digital Camera

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho


I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

The entire zoom lens will not come out when I turn the camera on. It moves a little, makes a sound, and then my camera says turn off camera off and back on. I tried that several times and it is still not working. The battery is charged. I did go to the beach and wondering if sand got into the camera. I also cannot review my pictures as the message comes up about turning it off. What is the best solution?


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-TZ3 Digital Camera

I have a sony cybershot, model DSC-W55. when i press the power on button, the camera does not turn on as it usualy does. instead, i get a black screen with the word Access on it. (also, when i turn the camera on, the lenses keep going in and out more frequently than before.) so the screen Access screen is just there right now, but when i click buttons like menu or display it makes beeping noises and it says 'press power on and off again '. i can still view the pictures i've taken but can't seem


You can try contacting Sony - maybe through online chat if its available for free. From what you have described, it sounds like a hardware failure. Contact Sony, and if it is a hardware failure, they will replace it for free. Or, if you have bought i ... Sony Digital Cameras

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as


I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

Turned camera on gives error message to turn off and back on again . No matter how many times we turn off and on it won't clear the message. Took battery out.put back in. Message still there. Also len


Camera was probably dropped. Motorized autofocus lens was probably damaged when dropped. It doesn't get more of a big deal than this. Depending on age of camera, it may be a ''wipe-out.'' Ps... I'm saying ''probably'' dropped because I did ... Digital Cameras

Everytime I turn on my sony camera. The lens pop out and in again. I can't figure why it's doing this! ALso the message turn off and then on again keeps appearing. I tried this, but it didn't work! I can upload the pictures in the camera, but i can't take any photos at all! One of my friends said its because my little sister dropped the camera while it was still on outside.


A drop could have damaged the lens tube (housing), causing the camera to shut down to prevent further damage, but your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the f ... Panasonic Lumix DMC-TZ3 Digital Camera

The lens of my Panasonic DMC-FT1 has fogged up on the inside and is displaying water droplets. The camera can still turns on ok but the pictures are blurred and the display screen is also blurred the camera was last used under water 3 days ago in a waist deep chlorinated pool.Any tips or solutions would be much appreciated.


... Digital Cameras

Hello there, i have had my tz15 for 18 months and have never had a problem it until now. I taking video at the time and then I went to zoom in and the lens started to do so maybe 1x, hesitated then retracted back into the camera as if it had been turned off and a message displayed on the white screen "Please turn camera of then on again". This doesn't work, i can still take photos but when i try to zoom the same thing happens every time. I was taking some shots and video of some electric arc we


I had the same problem. Tried on and off and press every button and it still tells me to "Please turn camera of then on again". I took my SD card out, turn it on in display mode, select menu, go to internal memory, erase all files in the intern ... Panasonic Lumix DMC-TZ15 Digital Camera

There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message


OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras

When I turn the camera on it says access , the lens goes in and out then I get a beep and message reads turn the power off and on again. I've done this over and over again and it still won't work.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... Sony Cyber-shot DSC-W30 Digital Camera

My sony cyber-shot dsc-w55 7.2 mega pixel camera turn on but the lens goes in and out many times and i get the word access on the screen then i get a message says turn the power off and on again, I did that many times , but it did not work, and I can't get the menu button to work or display any thing, so I am wondering what is the problem and how to fix it?


... Kodak EasyShare CX6200 Digital Camera

Nikson CoolPix L16 when the camera is turned on it displays "lens error". I can't take a picture and i can't access my pictures on the camera. It also jarrs halfway and holds a black version of the last image (like a negitive pic) All new batteries (*i've tried about 10sets of brand new ones) i've put in go flat in about 1-3 minutes abd displaces


Try jiggling the lens. Use compressed air to blow out any grit around the lens barrel. If that doesn't do it, you'll need to get the camera serviced. ... Nikon Digital Cameras

When I turn the camera on it says access , the lens goes in and out then I get a beep and message reads turn the power off and on again. I've done this over and over again and it still won't work. Any sugestions?


One thing to test before going to repair, make sure you are using a fully charged and correct battery for your camera.\015\012If so, the camera will need repair. This is a common problem and can be fixed. Teleplan Camera Repair does a great job ... Sony Cyber-shot DSC-W30 Digital Camera

My Pentax Optio M60 lens seems to be frozen half way out of the camera with the lens cover also partially open. When I turn in onn it sounds like the lens is trying to focus then turns intself off. Nothing is written on the screen unless I also press the menu button which displays VER 1.00 before bleeping three times and turning off or the green button which displays VER 0163A SBM -FIRM before beeping 3 times and swithcing off. Nothing else seem to do anything. I havn't dropped it or got the cam


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will hav ... Pentax Optio M60 Digital Camera

Lens Error I fell while holding my camera. The lens was open at the time and when I got up I turned the camera off. I then turned it back on to check it and the lens opened and immediately closed with the "lens error" on the screen. I can turn it off and on and the lens will always open but closes as soon as it has opened with the lens error on the screen. The shutter opens but closes also, like the lens. Can this be fixed? It was a gift so I don't have the bill of sale but I still have the orig


This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon COOLPIX L4 Digital Camera

Error message my nikon D -80 is flahing an error message. When i try to take a photograph i hear it cycle, but nothing is taken. The automatic focus does not work. I think i might have turned the camera off by accident while it was writing a photo to my card *sighs* I have tried removing the battery, a new card, remove and replace the lens, remove lens and clean contact, and talking very sweetly to the camrea. Nothing worked and the same messages is displayed when i turn the camera on. Any advic


This may be due to the aperture ring in your lens. Try the following:\015\012\015\0121. Turn off your camera\015\0122. Move the aperture ring clockwise then lock\015\0123. Turn on your camera and try again.\015\012 ... Nikon D80 Digital Camera with 18-135mm Lens

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.


Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

I have a Canon Power Shot SX120 IS camera. I turned it on and the lens open a portion of the way and I got an error message that say, "Lens Error Restart Camera". I put fresh batteries in it this morning and have only taken about 10 pic's. I turned the camera off and removed the batteries then replaced with new ones but I still get same message. Please advise if you can.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SX100 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5318 seconds